Společnost Ortur vyrábí cenově dostupné, high-tech diodové laserové gravírky a řezačky, které jsou navrženy tak, aby usnadňovaly a zpřístupňovaly laserovou tvorbu amatérům a malým firmám.
Dongguan Ortur Intelligent Technologies Co., Ltd. (ORTUR) is a high-tech manufacturer dedicated to the development and production of diode laser engraving and cutting machines. Founded by a team of passionate engineers, Ortur aims to make laser technology accessible, safe, and user-friendly for creators worldwide. Their product line, which includes the popular top-rated Laser Master series, allows users to engrave and cut a wide variety of materials such as wood, leather, acrylic, and metal with precision.
Ortur places a strong emphasis on safety and innovation, integrating features like flame detection, emergency stop buttons, and active position protection into their machines. Whether for DIY projects, artistic creation, or small business production, Ortur provides reliable tools supported by a growing community of makers.
Nejnovější manuály od manuals+ vytvořeno pro tuto značku.
Podívejte se na videa o nastavení, instalaci a řešení problémů pro tuto značku.
Časté dotazy ohledně manuálů, registrace a podpory této značky.
Loosen the hand screw to allow the laser module to slide. Lower the module until the focusing rod (or kickstand) just touches the surface of the material to be engraved. Tighten the hand screw and retract the focusing rod.
It is recommended to clean the laser lens with medical alcohol and a cotton swab after every 4 hours of continuous use, or if the machine has not been used for a long time, to prevent power loss or damage.
To engage the emergency stop and cut power immediately, press the button down. To unlock and reset the machine for operation, rotate the button until it pops up.
Yes, depending on your operating system (Windows 7/8/10/11 or macOS), you may need to install specific drivers (such as VCP drivers) or use the Zadig tool to ensure the software communicates correctly with the machine via USB.