Data Sync Engineering SMP-III Pokyny pro jehličkovou tiskárnu

Data Sync Engineering SMP-III Dot Matrix Printer Instructions

Data Sync Engineering – logoData Sync Engineering
P.O. Box 539, 2 pruh lávky
Blairstown, New Jersey 07825
www.cdadapter.com

Jehličková tiskárna SMP-III

Zcela nové, v uzavřeném obalu. Toto je přímá náhradní tiskárna OEM.
Dříve používané v tiskárně Midmark Sterilizer M9-M11 020 Series.
Snadná instalace, pouze dva konektory a čtyři šrouby, jak je znázorněno níže.

Data Sync Engineering SMP-III Jehličková tiskárnaData Sync Engineering SMP-III Jehličková tiskárna – obrázek 1Data Sync Engineering SMP-III Jehličková tiskárna – obrázek 2Data Sync Engineering SMP-III Jehličková tiskárna – obrázek 3

Dokumenty / zdroje

PDF thumbnailJehličková tiskárna SMP-III
Instructions · SMP-III Dot Matrix Printer, SMP-III, Dot Matrix Printer, Matrix Printer, Printer

Reference

Published: October 27, 2023

Otázky a odpovědi

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Answered questions

How do I fix paper feed issues on the SMP-III printer, and where can I order a replacement part?

The SMP-III is a direct OEM replacement printer often used in Midmark Sterilizer M9-M11 020 Series units. If the printer is failing to feed paper correctly or printing incorrectly after a jam, the internal...

Read full answer

Otázky a odpovědi

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. PRINTER WILL ONLY PRINT ON ONE SIDE OF THE PAPER AND IS NOT FEEDING THE PAPER FAST ENOUGH. TOOK OUT A PAPER JAM AND STILL THE SAME. CAN WE ORDER THE SMP-III PART?

    🇺🇸 DIANE TRAHANT asks PRINTER WILL ONLY PRINT ON ONE SIDE OF THE PAPER AND IS NOT FEEDING THE PAPER FAST ENOUGH. TOOK OUT A PAPER JAM AND STILL THE SAME. CAN WE ORDER THE SMP-III PART?
    Manuals+ clarified question
    Otázka

    How do I fix paper feed issues on the SMP-III printer, and where can I order a replacement part?

    Odpověď

    The SMP-III is a direct OEM replacement printer often used in Midmark Sterilizer M9-M11 020 Series units. If the printer is failing to feed paper correctly or printing incorrectly after a jam, the internal mechanism may be damaged.

    Objednávání dílů:
    You can contact Data Sync Engineering (cdadapter.com) regarding availability. Based on their official contact information:

    • Sales/Availability: Email Ann Marie at stbann@cdadapter.com nebo zavolejte (908) 362-1405.
    • Technická pomoc: Contact the design engineer, Ed Fischer, at (908) 362-6299.

    Pokyny k výměně:
    If you obtain a replacement SMP-III module, installation involves:

    1. Odpojení 8-Pin Control Connector.
    2. Odpojení 2-Pin Paper-Feed Connector.
    3. Odstranění 4 šrouby located at the corners of the mounting plate.
    4. Swapping the unit and re-inserting the screws and connectors.

    Note: The manufacturer has reported supply chain shortages for semiconductor components, so it is recommended to email for current lead times before placing an order.

    Read the full Q&A page

    Odpověď

Zeptejte se

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.

Matched by shared tags: Dot Matrix Printer, matrix printer, Printer
EPSON SureColor Series Printers User Guide
11. srpna 2026
SKYKING D4 Mini Printer Instruction Manual
10. srpna 2026
BIXOLON SLP-DX420 4″ Label Printer User Manual
10. srpna 2026
BIXOLON SLP-TX220 Desktop Label Printer User Manual
10. srpna 2026