SKYKING D4 Mini Printer Instruction Manual

SKYKING D4 Mini Printer Instruction Manual

SKYKING-logo

SKYKING D4 Mini Printer

SKYKING-D4-Mini-Printer-product

Nadview

The MINI Printer is an easy-to-operate children’s digital printer with a unique shape and is designed to make imagination and learning fun. Please read the manual carefully, follow warnings and precautions, and keep it for future reference.

Vlastnosti

  • První použití: charge first, then unplug the charger before use
  • Zapnout: long-press the power key for 3 seconds to boot
  • Požadavek na nabíjení: use a 5V charger to avoid damage
  • Print depth control: adjustable in the app under the “Concentration” section (Light, Medium, Dark, or Customized)
  • Soulad s FCC: Class B digital device (Part 15), with operation subject to two conditions

Quick Setup & Use

  1. For first use, charge the printer, then unplug the charger before operating.
  2. Power on by long-pressing the power key for 3 seconds.
  3. Install the app “iBleem” (via Apple App Store or Google search) on your mobile phone.
  4. Enable Bluetooth and connect using the iBleem app: in the app’s “My Device” tab, connect to the Bluetooth printer.
  5. After successful connection, print a note from the app.
  6. To replace paper: remove the old paper roll and insert the new roll in the direction shown; ensure the paper is straight (not crooked). Expose about 2 cm of the thermosensitive paper into the paper bin opening so the machine can absorb paper automatically, then close the paper bin.

Stručný úvod

Welcome and thank you for choosing our products. In order to understand and use our products more quickly, it is recommended that you read this manual carefully before use and keep it properly for future reference. Warnings and precautions in the instruction manual should be complied with. If there is any reference error, we hope that users will understand that the design content will be changed without notice. This product is a unique shape, exquisite design, easy-to-operate children’s digital printer, designed for children’s digital products, so that children in use to learn more imagination and play, experience the fun of nature.

Specifikace klíče/rozhraní

SKYKING-D4-Mini-Printer-fig- (1)

Nabijte prosím poprvé a před použitím odpojte nabíječku

Použijte průvodce

  1. First use: please charge first, long-press the power key 3 seconds to boot.SKYKING-D4-Mini-Printer-fig- (2)
  2. Apple Store or Google search: iBleem, installed APP to use.SKYKING-D4-Mini-Printer-fig- (3)
  3. Po aktivaci bluetooth použijte aplikaci staženou z mobilního telefonu pro připojení k tiskárně Bluetooth na liště TAB „Moje zařízení“. Po úspěšném připojení lze poznámku vytisknout.SKYKING-D4-Mini-Printer-fig- (4)

Kurz výměny papíru

  1. Vyjměte starou roli papíru a vložte novou roli papíru ve vyznačeném směru. Papír by měl být položen rovně a ne nakřivo. Note: The new thermosensitive paper needs to be exposed to 2 cm of paper bin length so that the machine can absorb paper automatically when the paper bin is shapedSKYKING-D4-Mini-Printer-fig- (5)
  2. Zakryjte přihrádku na papír, stroj může po normálním použití automaticky absorbovat papír.SKYKING-D4-Mini-Printer-fig- (6)
  3. Po provedení výše uvedených kroků může zařízení normálně tisknout.SKYKING-D4-Mini-Printer-fig- (7)

Upozornění na baterie

  • K nabíjení použijte 5V nabíječku podle specifikace, aby nedošlo k poškození stroje.
  • Demontáž, náraz, vytlačování nebo oheň jsou zakázány;
  • Pokud dojde k silnému vyboulení, nepokračujte v používání;
  • Do not put in a high-temperature environment; battery after immersion is prohibited to use;
  • Výměna za nesprávný typ baterie může být výbušná; dodržujte pokyny k likvidaci použitých baterií.

Záležitosti vyžadující pozornost

  • Při nabíjení jemně zasuňte nebo vytáhněte nabíjecí vedení, abyste zabránili poškození portu nadměrnou silou;
  • Po nabití včas odpojte nabíjecí kabel;
  • In order to avoid danger, do not use or charge in high-temperature, high-humidity, excessive smoke and dust environments, such as: bathroom, steam room, open fire, etc;
  • Nesprávné nabíjení může vést k poškození tiskové hlavy;
  • Nedotýkejte se tiskové hlavy, aby nedošlo k přehřátí a opaření;
  • The tear paper blade sharp; be careful not to touch.

The depth of the print can be controlled through the APP in the »Concentration« section as shown in the picture below. The concentration setting can be set to Light, Medium, Dark or Customized.

SKYKING-D4-Mini-Printer-fig- (8)

Varování FCC

Toto zařízení je v souladu s částí 15 pravidel FCC. Provoz podléhá následujícím dvěma podmínkám:

  1. Toto zařízení nesmí způsobovat škodlivé rušení a
  2. toto zařízení musí akceptovat jakékoli přijaté rušení, včetně rušení, které může způsobit nežádoucí provoz. Jakékoli změny nebo úpravy, které nejsou výslovně schváleny stranou odpovědnou za shodu, mohou zrušit oprávnění uživatele provozovat zařízení.

Poznámka: Toto zařízení bylo testováno a bylo zjištěno, že vyhovuje limitům pro digitální zařízení třídy B podle části 15 pravidel FCC. Tyto limity jsou navrženy tak, aby poskytovaly přiměřenou ochranu před škodlivým rušením při domácí instalaci. Toto zařízení generuje, používá a může vyzařovat vysokofrekvenční energii a pokud není nainstalováno a používáno v souladu s pokyny, může způsobovat škodlivé rušení rádiové komunikace. Nelze však zaručit, že při konkrétní instalaci k rušení nedojde. Pokud toto zařízení způsobuje škodlivé rušení rádiového nebo televizního příjmu, což lze zjistit vypnutím a zapnutím zařízení, doporučujeme uživateli, aby se pokusil napravit rušení jedním nebo více z následujících opatření:

  • Přeorientujte nebo přemístěte přijímací anténu.
  • Zvětšete vzdálenost mezi zařízením a přijímačem.
  • Připojte zařízení do zásuvky v jiném okruhu, než ke kterému je připojen přijímač.
  • Požádejte o pomoc prodejce nebo zkušeného rádiového/TV technika.

Zařízení bylo vyhodnoceno tak, aby vyhovovalo obecným požadavkům na vystavení vysokofrekvenčnímu záření. Zařízení lze používat v přenosných expozičních podmínkách bez omezení.

Odstraňování problémů

  • Printer will not boot: For first use, ensure it has been charged, then long-press the power key for 3 seconds to start.
  • Cannot connect / print: Confirm Bluetooth is enabled and connect to the Bluetooth printer through the iBleem app under “My Device.”
  • Paper not feeding or printing stops: Check that the new thermosensitive paper is inserted straight (not crooked) and that approximately 2 cm of paper is exposed into the paper bin opening before closing the bin.
  • Print head issues / overheating concerns: Do not touch the print head; improper charging may lead to print head damage. Stop use if conditions suggest damage (e.g., severe bulging in the battery).
  • Charging/port concern: Insert or pull out the charging line gently to prevent excessive force that could damage the charging port, and unplug after charging.

Dokumenty / zdroje

PDF thumbnailMini tiskárna D4
Instruction Manual · 2BKNV-D4, 2BKNVD4, D4 Mini Printer, D4, Mini Printer, Printer

Reference

Zeptejte se

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Zeptejte se

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.