Puig 21795W

Puig Touring Screen Instruction Manual

For BMW R1300GS Motorcycles (2023-2024 Models)

Konec produktuview

This manual provides detailed instructions for the installation, operation, and maintenance of your Puig Touring Screen, model 21795W, designed specifically for the BMW R1300GS motorcycle (2023-2024 models).

The Puig Touring Screen is engineered to enhance rider comfort and protection. Key features include:

Nastavení a instalace

Before beginning installation, ensure you have all components as listed in the packaging. All necessary components are included with your Puig Touring Screen. It is recommended to perform installation in a clean, well-lit area.

Požadované nástroje (nejsou součástí dodávky):

Kroky instalace:

  1. Příprava motocyklu: Park the motorcycle on a stable, level surface. Turn off the engine and remove the ignition key.
  2. Remove Existing Windshield: Carefully locate and remove the bolts securing the original windshield to the motorcycle's fairing or mounting bracket. Keep these bolts and any spacers or washers organized, as some may be reused.
  3. Attach Mounting Hardware (if applicable): If your Puig Touring Screen comes with separate mounting brackets, attach them to the motorcycle according to the specific instructions provided in the packaging. Ensure all fasteners are hand-tightened initially.
  4. Position the Puig Touring Screen: Carefully align the Puig Touring Screen with the mounting points on the motorcycle or the newly installed brackets. Insert the provided bolts (or reused original bolts, as per specific instructions) through the screen and into the mounting points.
  5. Zabezpečení obrazovky: Hand-tighten all bolts to ensure proper alignment. Once aligned, progressively tighten all bolts evenly. Refer to your motorcycle's service manual or the Puig instructions for recommended torque specifications. Neutahujte příliš.
  6. Závěrečná kontrola: Gently shake the screen to ensure it is securely mounted and does not wobble. Verify that all fasteners are tight and that the screen does not interfere with steering or other controls.
Puig Touring Screen installed on a BMW R1300GS motorcycle
Image: The Puig Touring Screen (clear) securely installed on the front of a blue and white BMW R1300GS motorcycle. The screen provides extended wind protection above the handlebars.

Provoz a seřízení

The Puig Touring Screen is designed to provide optimal wind protection. Depending on your motorcycle's specific mechanism, your screen may offer adjustable height or angle settings.

Nastavení obrazovky:

Údržba a péče

Proper care will extend the life and maintain the clarity of your Puig Touring Screen.

Pokyny pro čištění:

Inspekce:

Odstraňování problémů

If you encounter issues with your Puig Touring Screen, consider the following common solutions:

ProblémMožná příčinaŘešení
Excessive Wind BuffetingScreen height/angle not optimized; rider height/helmet type.Adjust screen to a higher position if your motorcycle allows. Experiment with different settings. Ensure proper helmet fit.
Vibrace nebo chrastěníLoose mounting bolts; improper installation.Check all mounting bolts and ensure they are tightened to specifications. Re-verify installation steps.
Reduced VisibilityDirty screen; scratches.Clean the screen using recommended methods. For deep scratches, consider professional acrylic repair or replacement.

Specifikace

FunkceDetail
ZnačkaPuig
Název modeluProhlídková obrazovka
Číslo modelu21795W
KompatibilitaBMW R1300GS (2023-2024 models, including Option 719 TRAMONTANA, Triple Black, Trophy editions)
MateriálHigh-Impact Acrylic
Hmotnost položky2.78 libry (přibližně 1.26 kg)
Rozměry produktu24.4 x 24.4 x 3.7 palce (přibližně 62 x 62 x 9.4 cm)
VlastnostiWind tunnel tested, improved protection and rider comfort.

Záruka a podpora

For warranty information or technical support regarding your Puig Touring Screen, please contact Puig directly through their official webnebo u autorizovaných distributorů. Uschovejte si účtenku jako doklad o koupi.

For general inquiries or further assistance, you may visit the Puig official webmísto.

Související dokumenty - 21795W

Předview Puig Mounting Instructions: BMW R1300GS Touring Plus Screen with Radar/ACC
Step-by-step guide for installing the Puig Touring Plus Screen with Radar/ACC on BMW R1300GS and R1300GS Adventure (2023-). Includes parts list, assembly steps, and torque specifications.
Předview Návod k montáži plexi štítu Puig Z-Racing pro BMW R1300GS '24-
Podrobný návod k montáži a seznam dílů pro instalaci clony Puig Z-Racing na motocykl BMW R1300GS (model 2024). Obsahuje podrobné pokyny a identifikaci součástí.
Předview Návod k instalaci plexi Puig Touring pro BMW F750GS '18-'21 (REF 3768)
Podrobný návod k montáži a seznam dílů pro cestovní plexi Puig (REF 3768) určený pro modely motocyklů BMW F750GS od roku 2018 do roku 2021. Obsahuje podrobnosti o demontáži, montáži a požadovaných komponentách.
Předview Návod k montáži zadního blatníku Puig pro BMW R1300GS
Podrobný návod k montáži a seznam dílů pro zadní blatník Puig pro motocykly BMW R1300GS a R1300GS Adventure (modely 2023-2024).
Předview Puig Touring Screen for BMW G310GS '17- Mounting Instructions
Official mounting instructions and parts list for the Puig Touring Screen designed for the BMW G310GS motorcycle (2017 onwards). Includes step-by-step assembly guide.
Předview Návod k montáži štítu Puig Touring pro Kawasaki Versys 1000/650 (2015+)
Podrobný návod k montáži a seznam dílů pro cestovní plexi Puig (REF 9421) určený pro motocykly Kawasaki Versys 1000 a Versys 650 (od roku 2015). Obsahuje podrobné pokyny a poznámky ke kompatibilitě.