Zavedení
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig Downforce Spoiler Sport, model 3739N. This accessory is specifically designed for the Yamaha YZF-R3 motorcycle models from 2019 to 2020. Please read this manual thoroughly before proceeding with installation or use to ensure safety and optimal performance.
Image: The Puig Downforce Spoiler Sport, black in color, is shown installed on the side fairing of a blue Yamaha YZF-R3 motorcycle. The spoiler is positioned near the front wheel, designed to enhance aerodynamic performance.
Bezpečnostní informace
- Always wear appropriate safety gear when working on your motorcycle.
- Ensure the motorcycle is stable and securely supported before beginning installation.
- Refer to your motorcycle's service manual for specific torque specifications and component removal procedures.
- If you are unsure about any step, seek assistance from a qualified motorcycle technician.
Obsah balení
Ověřte, zda jsou v balení přítomny všechny níže uvedené komponenty:
- Puig Downforce Spoiler Sport (Left and Right units)
- Mounting Hardware Kit (screws, washers, spacers as required)
- Installation Instructions Sheet (this document)
Nastavení a instalace
Požadované nástroje:
- Sada šestihranných klíčů
- Momentový klíč
- Čistý hadřík
Kroky instalace:
- Příprava motocyklu: Park the Yamaha YZF-R3 on a level surface using a paddock stand or center stand for stability. Ensure the engine is cool.
- Určete montážní body: Locate the designated mounting points on the motorcycle's side fairings. These points are typically pre-drilled or marked for accessory installation.
- Position the Spoiler: Carefully align one side of the Puig Downforce Spoiler Sport with its corresponding mounting points on the fairing.
- Zabezpečení pomocí hardwaru: Using the provided mounting hardware (screws, washers, spacers), hand-tighten the spoiler into place. Do not fully tighten at this stage.
- Opakujte pro druhou stranu: Follow steps 3 and 4 for the opposite side of the motorcycle.
- Konečné utažení: Once both spoilers are loosely mounted and properly aligned, progressively tighten all screws to the manufacturer's recommended torque specifications. Refer to your motorcycle's service manual for fairing component torque values if not provided with the spoiler. Ensure all fasteners are secure.
- Kontrola instalace: Visually inspect both spoilers to ensure they are securely attached, properly aligned, and do not interfere with any other motorcycle components (e.g., handlebars, suspension, or bodywork during full steering lock).
Provozní informace
The Puig Downforce Spoiler Sport is a passive aerodynamic component. Once correctly installed, it operates continuously to enhance the motorcycle's stability and aerodynamic performance. No user interaction is required for its operation.
- Vylepšená stabilita: Designed to provide more stability at high speeds and during directional changes.
- Anti-Wheelie Effect: Contributes to reducing front wheel lift during strong accelerations.
Údržba
- Pravidelný úklid: Clean the spoiler regularly with a mild soap and water solution and a soft cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Kontrola upevňovacích prvků: Periodically inspect all mounting fasteners for tightness. Vibrations from motorcycle operation can cause fasteners to loosen over time. Re-tighten to specifications if necessary.
- Kontrola poškození: Routinely check the spoiler for any signs of damage, cracks, or wear. Replace the spoiler if it is damaged to maintain aerodynamic integrity and safety.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Spoiler feels loose after installation. | Fasteners not tightened to specification. | Re-tighten all mounting screws to the recommended torque. |
| Spoiler interferes with other components. | Nesprávné umístění během instalace. | Loosen fasteners, re-position the spoiler for proper clearance, then re-tighten. |
| Visible damage to the spoiler. | Impact or material fatigue. | Replace the damaged spoiler to ensure safety and performance. |
Specifikace
- Model: 3739N
- Značka: Puig
- Kompatibilita: Yamaha YZF-R3 (2019-2020)
- Materiál: Vysoce kvalitní odolný plast
- Barva: Černý
- Styl: Aerodynamický
- Hmotnost položky: Přibližně 1.55 libry (0.7 kg)
- Rozměry balení: Přibližně 13.2 x 8.2 x 4.5 palce (33.5 x 20.8 x 11.4 cm)
Záruka a podpora
For warranty information and technical support, please refer to the official Puig website or contact your authorized Puig dealer. Keep your purchase receipt as proof of purchase for any warranty claims.
Výrobce: PUIG
