Zavedení
This manual provides essential instructions for the proper installation, operation, and maintenance of your Puig 1482F Dark Smoke Windy Windshield. Please read this manual thoroughly before installation and retain it for future reference. Correct installation and care ensure optimal performance and longevity of the product.
Bezpečnostní informace
- Při instalaci vždy používejte vhodné osobní ochranné prostředky.
- Ensure the motorcycle is stable and secure before beginning any work.
- Do not overtighten fasteners, as this can damage components. Refer to your motorcycle's service manual for specific torque specifications if applicable.
- Verify all components are securely fastened before operating the motorcycle.
- Pokud si nejste jisti jakoukoli částí instalace, poraďte se s kvalifikovaným mechanikem.
Obsah balení
Upon opening the package, verify that all components are present and undamaged. The standard package for the Puig 1482F Dark Smoke Windy Windshield typically includes:
- 1 x Puig 1482F Dark Smoke Windy Windshield
- Mounting hardware kit (brackets, screws, washers, nuts) - Note: Some users have reported missing hardware. Please check your package carefully.
- Installation instructions (may be generic or specific)
If any items are missing or damaged, contact your retailer or Puig customer support immediately.
Průvodce instalací
The Puig 1482F Windy Windshield is designed for universal fitment on motorcycles with round headlights, typically utilizing the headlight mounting points. Specific installation steps may vary slightly depending on your motorcycle model. The following steps provide a general guide.
Požadované nástroje:
- Hex key set (Allen wrenches)
- Sada klíčů
- Šroubovák s křížovou hlavou
- Měkká látka
- Ochranné rukavice
Kroky instalace:
- Příprava motocyklu: Park the motorcycle on a level surface and ensure it is stable. Turn off the engine and remove the ignition key.
- Určete montážní body: The windshield typically mounts to the headlight bracket bolts. Locate these bolts on your motorcycle.
- Připevněte držáky: Secure the provided mounting brackets to the windshield using the smaller screws and washers. Do not fully tighten yet.
- Poloha čelního skla: Carefully align the windshield with the motorcycle's headlight. The brackets should align with the headlight mounting bolts.
- Secure to Motorcycle: Loosely attach the windshield assembly to the motorcycle's headlight mounting points using the longer bolts and nuts.
- Upravit pozici: Adjust the angle and height of the windshield for optimal fit and rider comfort. Ensure it does not interfere with steering or controls.
- Utáhněte upevňovací prvky: Once the desired position is achieved, progressively tighten all mounting bolts. Start with the bolts securing the brackets to the motorcycle, then tighten the bolts securing the windshield to the brackets. Ensure all connections are firm but do not overtighten.
- Závěrečná kontrola: Verify that the windshield is securely mounted and does not wobble. Check for any interference with other motorcycle components.
Provoz a výkon
The Puig 1482F Windy Windshield is designed to deflect wind and reduce rider fatigue, particularly at higher speeds. Its "Windy" design aims to create a bubble of calmer air behind the screen. Performance may vary based on motorcycle model, rider height, and riding conditions.
- Odklon větru: The windshield is engineered to redirect airflow over and around the rider, potentially reducing direct wind pressure on the chest and helmet.
- Viditelnost: The dark smoke tint provides a stylish appearance. Ensure that the tint does not impair your visibility, especially in low-light conditions.
- Stabilita: A properly installed windshield should not negatively impact the motorcycle's stability. If you experience any instability, re-check the installation.
Údržba
Proper maintenance ensures the longevity and clarity of your windshield.
- Čištění: Clean the windshield regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can scratch or damage the acrylic material. Rinse thoroughly and dry with a clean, soft cloth.
- Inspekce: Periodically inspect the windshield and its mounting hardware for any signs of damage, cracks, or loose fasteners. Tighten any loose bolts as necessary.
- Skladování: When not in use for extended periods, store the motorcycle in a shaded area or cover the windshield to protect it from prolonged exposure to direct sunlight, which can cause material degradation over time.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Windshield vibrates or rattles | Uvolněné montážní prvky. | Check and tighten all bolts and nuts. Ensure rubber washers or grommets are correctly seated if included. |
| Excessive wind buffeting | Incorrect angle or height adjustment. | Adjust the windshield's angle and height. Small changes can significantly affect airflow. |
| Scratches or haziness on surface | Nesprávné metody čištění nebo použití abrazivních materiálů. | Use only soft cloths and mild soap for cleaning. Avoid dry wiping. Minor scratches may be polished with specialized acrylic polish. |
| Windshield does not fit correctly | Incorrect model for motorcycle or missing/incorrect mounting hardware. | Verify the windshield model (1482F) is compatible with your motorcycle. Contact retailer if hardware is incorrect or missing. |
Specifikace
- Model: Puig 1482F Windy Windshield
- Barva: Temný kouř
- Materiál: High-impact acrylic
- Rozměry (balení): Přibližně 15.75 x 15.75 x 5.91 palce (40 x 40 x 15 cm)
- Hmotnost položky: Přibližně 1.1 libry (0.5 kg)
- Výrobce: Puig
- Země původu: Španělsko
Záruka a podpora
For information regarding warranty coverage, product support, or to purchase replacement parts, please contact your authorized Puig dealer or visit the official Puig webUschovejte si doklad o koupi pro případ reklamace.
Puig Official Webmísto: www.puig.tv
