Logo UNTITLED

BEZ NÁZVU Stolní počítač Opti Plex

UNTITLED-Opti-Plex-Desktop-Computer-product

Specifikace produktu

  • Součásti zahrnuté v balení: Deska pro stolní počítač, Příčné rameno, Stolní tyče
  • (2), Vrstvená deska, Uzamykatelná kolečka (4), Nastavitelné knoflíky (4), Háčky
  • (2), Šroubováky (1), Šrouby různých velikostí
  • Materiál: kov a plast
  • Rozměry: [zde vložte rozměry]
  • Hmotnost: [Sem vložte váhu]

Požadované nástroje

UNTITLED-Opti-Plex-Desktop-Computer-fig- (1)

Shromáždění

  1. Install2atthe bottomoftheleg on4lockable wheelsUNTITLED-Opti-Plex-Desktop-Computer-fig- (2)
  2. Screw four 6cm Since the tapping on the layerboardUNTITLED-Opti-Plex-Desktop-Computer-fig- (3)
  3. Tighten 4 x 6cm Since the tapping and 4 x 4cm flat head screws in the position shown in the pictureUNTITLED-Opti-Plex-Desktop-Computer-fig- (4)
  4. Insert 2 desktop poles into the bottom of the leg (This step is already installed)UNTITLED-Opti-Plex-Desktop-Computer-fig- (5)
  5. Mount the desktop pole on the desktop board with four 3cm flat head screwsUNTITLED-Opti-Plex-Desktop-Computer-fig- (6)
  6. Utáhněte 4 nastavitelné knoflíkyUNTITLED-Opti-Plex-Desktop-Computer-fig- (7)
  7. Tighten the 2 hooks on both sides of the desktop plate and the 2 pointedshort screws with 4 * 1 cm flat head screwsUNTITLED-Opti-Plex-Desktop-Computer-fig- (8)
  8. Installation steps with the monitor stand Screw the monitor poles to the monitor board with a 4 * 1cm flat head screwUNTITLED-Opti-Plex-Desktop-Computer-fig- (9)
  9. Insert the Monitor poles C-slot into the monitor board and tighten the 4 * 1cm flat head screwUNTITLED-Opti-Plex-Desktop-Computer-fig- (10)
  10. Installation completed! 2 types of feet can be switched to useUNTITLED-Opti-Plex-Desktop-Computer-fig- (10)UNTITLED-Opti-Plex-Desktop-Computer-fig- (11)

Umístění

Place the assembled product in a suitable location, ensuring stability and proper alignment.

Úpravy

Make any necessary adjustments to the height or position of the components to suit your needs.

Údržba

Regularly check and tighten screws and knobs to maintainstability. Clean the product with a damp hadříkem, když je potřeba.

Nejčastější dotazy

Otázka: Mohu si nastavit výšku pracovní desky?
A: Yes, you can adjust the height by loosening the adjustable knobs, repositioning the components, and then tightening the knobs securely.

Otázka: Jak připevním monitor ke stojanu monitoru?
A: Follow the provided instructions to mount the monitor poles to the monitor board using the specified screws and slots.

Dokumenty / zdroje

BEZ NÁZVU Stolní počítač Opti Plex [pdfNávod k obsluze
Stolní počítač Opti Plex, Stolní počítač Plex, Stolní počítač, Počítač

Reference

Zanechte komentář

Vaše emailová adresa nebude zveřejněna. Povinná pole jsou označena *