SOOPYK IC1501 Nugget Ice Maker

Specifikace
- Hmotnost: 17.8/15.8 kg
- Kapacita: 31g
Nastavení
- Remove the package carefully without using sharp tools.
- Place the ice maker on a level and stable surface that can support its weight.
- Open the drawer to access the instruction manual and ice shovel.
- Position the drip tray at the bottom front of the ice maker.
- Clean the ice maker with clean water before use.
Údržba
- Disconnect power and water before maintenance or manual cleaning.
- Maintain ventilation and heat dissipation by cleaning with a brush.
- Avoid stains on the outside of the ice maker to prevent electric shock.
Čištění
- Remove the ice storage drawer.
- Wipe the drawer, liner, and top ice outlet with lukewarm water and a soft cloth.
- Clean stubborn areas by scrubbing gently with a soft cloth.
- Use the self-cleaning function to rinse and clean the interior.
- Po vyčištění důkladně osušte měkkým hadříkem.
Understanding the Control Board
- Power Button: ON/OFF button
- Light Button: Light ON/OFF button
- Clean Button: Self-cleaning ON/OFF button
Návod k obsluze
- Plug in the machine to power. The Power button light flashes in Standby Mode.
- To start, press the Power button to enter Working Ready State.
- Follow specific button combinations for different settings like lighting or self-cleaning.
“`
SAFETY INFORMATION Please read and understand the entire manual before attempting to operate or use the product. This will ensure you receive the most enjoyable and trouble-free operation of your new ice maker. • Warning: To avoid fire, electric shock or accidents, please follow these basic safety rules. • After unpacking the machine, it needs to stand at least 24 hours before powered on.

Do not damage the power cord or plug. Avoid heating, twisting or pulling power cord. These actions my result in electric short circuit and/or fire • Use the correct power socket, the power socket must have reliable grounding, and ensure that the power plug is fully inserted into the socket. • Due to the safety hazard in some conditions, we strongly recommend not to use an extension cord, if you must use it, please use a 3-wire grounded cord with a rated current (minimum) 15A. •

Do not squeeze or pull the power cord. The power cord should be placed in a place where it will not be disturbed and should not be immersed in water. • Keep this product away from children or inexperienced unless they are supervised or prompted by those knowledgeable and responsible for their safety. • Do not use wet hands to plug and unplug the power supply, otherwise it may cause electric shock, burn or other injuries. • This product must be installed and used correctly, please read this manual carefully before installation. • This product is only suitable for indoor use at home (such as home, hotel, bar, etc.), do not use it outdoors. • Do not store or use flammable gas or liquid near the machine. •

Do not store explosives (such as gasoline, accelerant, etc.) in the machine. • Do not allow children to climb, stand or hang from the ice maker. • The machine can only be filled with potable water. • Please cut off the power before manual cleaning, repair or maintenance. • Do not clean the ice maker with flammable or caustic liquids. This may cause fire or explosion. • Do not disassemble, repair or change any part of the product.
Do not use any accessories not recommended by the manufacturer. • When the UV lamp inside the machine is working, please do not look directly at the light of the UV lamp, it will cause serious damage to the eyes and damage the unprotected skin. • In order to avoid being hurt by UV light, please do not disassemble and then power on.• Do not use wet hands to plug and unplug the power supply, otherwise it may
cause electric shock, burn or other injuries.

• This product must be installed and used correctly, please read this manual
pečlivě před instalací.
• This product is only suitable for indoor use at home (such as home, hotel, bar,
etc.), do not use it outdoors.
• Do not store or use flammable gas or liquid near the machine.
• Do not store explosives (such as gasoline, accelerant, etc.) in the machine.
• Do not allow children to climb, stand or hang from the ice maker.
• The machine can only be filled with potable water.

• Please cut off the power before manual cleaning, repair or maintenance.
• Do not clean the ice maker with flammable or caustic liquids. This may cause
požár nebo výbuch.
• Do not disassemble, repair or change any part of the product.
• Do not use any accessories not recommended by the manufacturer.
• When the UV lamp inside the machine is working, please do not look directly
at the light of the UV lamp, it will cause serious damage to the eyes and
damage the unprotected skin.
• In order to avoid being hurt by UV light, please do not disassemble and then
zapnout.
A Attentions: To reduce the risk of injury to people or things,
dodržujte tato základní bezpečnostní opatření.
• Do not remove any safety, warning or product information identification
information from the product.
• It is recommended that 2 people carry and install the ice maker to avoid
zranění.
After the ice maker is disconnected from the power supply, please remove all
the ice from the drawer to prevent the ice cubes from overflowing the machine.
A Warning: # Flammable refrigerants present a fire or explosion
nebezpečí.
The refrigerant used in the refrigerator is flammable, please follow the safety
warnings below to reduce the risk of injury or financial loss.
• Do not damage the refrigeration pipeline during transportation, installation
a provoz.
• When maintenance service is required, please contact the manufacturer or a
professional and qualified technician.
• A space of more than 150mm should be reserved around the ice maker to
zajistit dobré větrání.
• To defrost, use a plastic or wooden scraper or a wooden scraper. Do not
remove mechanical devices or electrical appliances frost, as it can puncture
the liner and damage the refrigeration lines.
• Do not use electrical appliances in the water tank/ice basket/ice storage
drawer of the ice maker.
After the ice maker is disconnected from the power supply, please remove all
the ice from the drawer to prevent the ice cubes from overflowing the machine.
A Warning: # Flammable refrigerants present a fire or explosion
nebezpečí.
The refrigerant used in the refrigerator is flammable, please follow the safety
warnings below to reduce the risk of injury or financial loss.
• Do not damage the refrigeration pipeline during transportation, installation
a provoz.
• When maintenance service is required, please contact the manufacturer or a
professional and qualified technician.
• A space of more than 150mm should be reserved around the ice maker to
zajistit dobré větrání.
• To defrost, use a plastic or wooden scraper or a wooden scraper. Do not
remove mechanical devices or electrical appliances frost, as it can puncture
the liner and damage the refrigeration lines.
• Do not use electrical appliances in the water tank/ice basket/ice storage
drawer of the ice maker.
Dispose of the device in accordance with federal and local regulations. The
flammable refrigerants and thermal insulation materials used require special
handling procedures, please contact your local authorities for safe and
environmentally friendly disposal of your appliances.
Příprava před použitím
A Attentions: For your better optimal of the product, please abide
by the following information.
• The ice maker is designed for indoor use, do not use it outdoors.
• The ice maker should be placed away from direct sunlight and heat soruces.
• A space of more than 150mm should be reserved around the ice maker to
zajistit dobré větrání.
• The location where the ice maker is placed has a suitable socket that meets
the safety requirements.
1. Remove the package carefully, do not use sharp tools, which may damage
the internal accessories or products
2. Place the ice maker upright on a stable horizontal surface that can support
the weight of the ice maker with water and ice.
3. Open the drawer and take out the instruction manual and ice shovel placed
uvnitř.
4. Place the drip tray on the bottom of the front of the ice maker, and push it to
the front foot.
5. Thoroughly clean the ice maker with clean water.
Údržba a čištění
• Warning: Must disconnect power and water before
maintenance or manual cleaning. Maintenance and cleaning of
the ice maker is not covered by the manufacturer’s warranty!)
Údržba:
• It is recommended to clean your ice maker once a week in order to keep the
ice cubes fresh.
• Always clean up the items and environment around the ice maker and keep
the space ventilated.
• The cooling vents can be brushed up and down with a soft brush or a vacuum
cleaner with a brush to maintain ventilation and heat dissipation, so as not
to affect the cooling efficiency
• The outside of the machine can be cleaned by scrubbing with a soft cloth,
diluted detergent and warm water
• Do not let water flow into the inside of the machine or on the electrical
components when cleaning the outside of the ice maker. Please wipe water
stains on the outside of the ice maker to avoid electric shock.
1. Take out the ice storage drawer. (see page 9 for details)
2. Use lukewarm water and a soft cloth to wipe the drawer, liner and top ice
vývod.
3. The outside of the machine can be cleaned by scrubbing with a soft cloth,
diluted detergent and warm water.
4. Turn on the ice machine self-cleaning function to rinse and clean the
5. Use another clean and soft cloth to dry the drawer, liner and top ice outlet to
dry any residual water.
6. When cleaning the side water tank, put the side water tank cover back on
the side water tank after draining the water.
UNDERSTAND THE CONTROL BOARD
**
Led plný
Čistý
Světlo
-[
Výroba ledu
Moc
Tlačítko:
Napájení: Tlačítko ZAP/VYP
Light: Light ON/OFF button
Clean: Self-cleaning ON/OFF button
Kontrolka:
แมนกู แล Making ice indication
Self-cleaning indication
Open/close ice storage drawer
When opening the ice storage drawer, hold the handle at the bottom of the
drawer (the handle position is behind the OPEN, see the figure below) and pull
the drawer outward in a horizontal direction gently until the lower edge of the
drawer hooks the left and right limit posts of the inner tank, and then put it
down, and the drawer will hang on the machine at a certain inclination angle.
When closing the drawer, hold the handle, flatten the drawer upwards, and
then gently push it until it is completely closed.
zacházet s
Install/remove the drip tray
When installing the drip tray, place the drip tray on the table or countertop and
push it to the bottom of the front of the ice maker.
To remove the drip tray, simply pull the drip tray out of the bottom of the ice
výrobce.
Čištění
When using the ice maker for the first time, or if the ice maker has not been
cleaned for a long time, it is recommended to clean it before making ice.
It is recommended to change the water every 24 hours to keep the water clean.
To keep the ice cubes fresh, it is recommended to clean your ice maker once a
1. Before starting the cleaning process, please check the drain hose on the back
of the machine to see whether they are reliably connected to the drain plug (see
When removing the drawer, hold the handle under the drawer and gently pull
it out in the horizontal direction until the lower edge of the drawer hooks the
left and right limit posts of the inner tank, lift it up to a certain angle, and then
pull the drawer outward to remove it.
When you need to re-install the drawer, first lift the drawer up to a certain
angle, then put the raised hooks on the back of the drawer into the left and
right limit posts of the inner tank, and then gently push the drawer until the
drawer is completely closed.
MAX FULL LINE
Pic 1
Pic 2
2. Remove the ice storage drawer (see page 9 for details).
3. Add potable water to the inner tank of the ice maker until the “MAX FULL
LINE” water level line (see Pic 2).
Note: Do not use caustic cleaning agents or solutions that are
harmful to people.
Dokumenty / zdroje
![]() |
SOOPYK IC1501 Nugget Ice Maker [pdfNávod k obsluze IC1501, AA003-A-1, IC1501 Nugget Ice Maker, IC1501, Nugget Ice Maker, Ice Maker |

