PYLE PLCMDVR49 Autokamera a zadní kameraview Uživatelská příručka sady pro zrcadlový displej

California Prop 65 Varování
Tento produkt vás může vystavit chemikáliím, o kterých je ve státě Kalifornie známo, že způsobují rakovinu, vrozené vady a další reprodukční poškození. Nepožívejte.
Pro více informací přejděte na: www.P65warnings.ca.gov

TECHNICKÉ SPECIFIKACE

DVR Cam Resolution: 720p
View Angle: 120° (Front Camera), 90° (Back Camera)
Video Resolution: (Front) 720P:1920×720+ (Back) 640 x 480 30fps
Picture Resolution: 12 / 8 / 3 / 2 / 1 MP

Video Filetype Saved: .AVI
Obraz Filetype Saved: .JPEG
Loop Recording: 1 / 2 / 3 Minutes
Datum a čas Svamp: ZAPNUTO VYPNUTO
Podpora karet Micro SD: Až 32 GB, není součástí dodávky
Rechargeable Battery: 3.7V Li-iOn, 450 mAh
Item Weight: 0.24 kg or 0.53 lbs.
Rozměry (D x Š x V): 12.0" x 1.6" x 3.3" -palce

ZAVEDENÍ

The PLCMDVR49 DVR Rearview Mirror Dash Cam Kit is designed to find evidence in the event of a traffic accident. This camera can also be used in other situations such as meetings, monitoring, forensics, location shooting, and video evidence. This product combines a wide dynamic digital industry-leading camera, seamless circular camera with no leakage of seconds, ultra-wide-angle shooting, real-time display playback, motion detection, and parking guard technology. It features a streamlined design that is uniquely fashionable, favored by many consumers.
This manual will detail how to install and operate the device, along with product parameters and important safety information. Please read it carefully and keep it for future reference before use.

Please note that the specification parameters may be subject to upgrades, updates, or other changes. Refer to the actual product for the most accurate information. The manufacturer reserves the right to change the technology without prior notice.

Copyright and Privacy Notice
Please be aware that this product is for personal use only. Its use must not violate domestic or international copyright or privacy laws. The images recorded by the device are for personal use only and are not intended for publication or distribution. Furthermore, using the product for exhibition or commercial purposes may, in some cases, infringe copyright or legal rights.

POZNÁMKY K INSTALACI

This product should be mounted alongside the original rearview mirror. Ensure the lens is outside the range of the windshield wipers to maintain clear visibility, even in rainy conditions.
Avoid touching the lens with your fingers, as finger grease may leave residue on the lens, resulting in unclear footage or photos. Regularly clean the lens to maintain optimal performance.

Pozor:

Please use the original standard charger.
Do not dismantle the device to avoid affecting the warranty scope.
If modifications to the power line are needed, please consult a professional.

POPIS STRUKTURY PRODUKTU

HOST KEYS AND INTERFACE SPECIFICATION

RECORDER INSTALLATION

Insert Memory Card: Insert the Micro SD card according to the device’s memory card instructions. The DVR supports memory sizes from 4GB to 32GB (Class 6 or higher).
Note: Please format the memory card before using the device for the first time.
Removing the Memory Card: Turn off the camera first, then press to eject the memory card.
Note: Do not remove or insert the memory card while the camera is powered on.

Installing on the Rear-View Zrcadlo:
The device is installed with silica gel. Position the lens to the left side of the original car’s rear-view mirror. Secure the device flat against the original rear view mirror using the strained silicon adhesive tape, and hang it below the hook. The equipment will be fastened to the original rear-view zrcadlo.
Připojte napájecí zdroj:
Use the original charger and connect one end of the charger to the USB interface of the camera. Then, insert the other end of the car charger into the car’s cigarette lighter port.
Note: The car charger extension cord should be installed along the windshield.

Turn On/Off Device:
- Automatic On/Off: The device will automatically power on when the car’s engine starts. The DVR will begin recording immediately. If the car charger remains plugged in, the DVR will stop recording and automatically save the data to the micro SD card. There is a 15-second delay when the car’s engine is
  off, and the DVR will then turn off.
- Manual On/Off: Press and hold the Power ON/OFF button. You will hear a “beep” sound, and the DVR will start recording automatically. To stop recording, press the “OK” Rec/Confirm Button. The DVR will save the data to your SD card and enter standby mode. Press the Power ON/OFF button again to turn off the camera.

Initial Settings for Recorder

Nastavte datum a čas:

The DVR will begin recording automatically when your car’s engine starts.
Press the OK button to put the device in standby mode.

V pohotovostním režimu stiskněte button to enter the menu settings. Then, use the button to find the “Date” menu and press the OK button to enter settings.
Použijte button to adjust the value, then press the OK button to confirm.
Stiskněte tlačítko button to exit once the setting is complete.

Camera Recorder Operation

The DVR will record automatically when the car’s engine starts. If the car charger remains plugged in, the DVR will stop recording and save the data to the micro SD card after a 15-second delay when the car’s engine . Alternatively, press the “OK” button to manually stop recording.
Note: For some cars, if the car’s engine is and the DVR is still on, manually turn the DVR or unplug the power charger from the car’s cigarette port.
Other Types of Recording:
In standard mode, press the “OK” button to start recording. Press the “OK” button again to stop recording.
Poznámka:
1. There are 1, 2, and 3-minute options for video recording.
  The DVR will automatically save one video file.
2. If the memory card is full, the DVR will automatically overwrite the previous video file.
3. For G-Sensor trigger or emergency video recording, the video will be overwritten. You will need to delete the file ručně.
Emergency Camera
Note: If the G-Sensor function detects a collision, the device will automatically lock the current recorded video and prevent it from being overwritten.

VIDEO / PHOTO CAPTURE OPERATION

Stiskněte tlačítko button to switch to video mode.
The video recording icon will display in the upper left corner of the screen.
Stiskněte tlačítko button to switch to photo capture mode.
Press the “OK” key to take a picture. When the DVR captures the photo, you will hear a “KA” sound, indicating the photo was successfully taken.

VIDEO / PHOTO PLAYBACK OPERATION

V pohotovostním režimu stisknětebutton twice to enter playback mode.
Theicon will appear in the center of the screen.
Press the or keys to select the file chcete view.

Press the “OK” key to play the selected video file; press thetlačítko pro ukončení.

OVLÁDÁNÍ MENU

V pohotovostním režimu stiskněte tlačítko pro vstup do nastavení nabídky.
Stiskněte tlačítko keys to choose the menu you want to adjust.
Press the “OK” key to confirm your setting.
Stiskněte tlačítko button to exit after completing the menu setting.

SPECIÁLNÍ FUNKCE

G-Sensor Function:
The G-Sensor is triggered (collision detection).
The DVR will save the accident video file and prevent it from being overwritten. You can adjust the sensitivity of the G-Sensor in the menu settings.
File Uzamykací funkce:
In recording mode, if you capture an important event, press thekey to manually lock the file. Video file nebudou přepsány.
Funkce sledování parkování
1. Enable this function through the menu settings first (or press and hold thebutton to start parking monitoring). When the car’s engine is off and the DVR detects external vibrations, the DVR will automatically turn on and record for 10-15 seconds, then automatically turn off.
2. Video monitorování parkování files will be locked automatically.
  Note: Please disable the parking monitoring function when you want to do normal video recording.
Funkce detekce pohybu
The DVR is equipped with motion detection, which allows the device to remain on and record if it detects vandalism, a collision, or someone parking too close.
In standby mode, turn on the DVR and enable motion detection from the menu settings. The LCD display will show the motion detection icon in the upper center of the screen. If motion is detected within 3 meters, the DVR will automatically record for 10-30 seconds.
Režim USB:
When you connect the DVR to a computer via USB cable, the DVR will pop up two menu options automatically:
1. USB Storage Mode: Access video or photo files v tomto režimu.
2. PCCAM Mode: Select this mode to use the DVR as a webcam for real-time video or photo chats using a PC.
Pokyny pro baterie
The battery indicator will show:
Turn on the vehicle power supply, and the charging time will be approximately 180 minutes. The red light charge indicator will turn off automatically once fully charged.
Poznámka:
This DVR can work for an extended period when connected to the car’s power input. The built-in battery is only for parking monitoring. Battery capacity is limited when not connected to the car’s power, so connect to the vehicle’s power for daily use.
Reset: If the DVR freezes or behaves abnormally, use a small needle to press the “RESET” button through the hole to reset the device.

DISPLAY INTERFACE ICONS

Ikona videa
- Foto ikona
- Video Playback Icon
- Motion Detection Icon
2. 1080P: Indicates the current video format size
Video Locked Icon
- Parking Control Icon: Indicates parking control is active;

Parking control off” icon when deactivated
Ikona paměťové karty
Recording Status: Recording active Nahrávání vypnuto
Displej napájení baterie
02:20: Shows the current video time (user can adjust)
2016-8-10: Shows the current date (user can adjust)
02:19:50: Shows the current Time (user can adjust)

MENU NASTAVENÍ

Menu Volba	Vysvětlení	K dispozici Možnosti
Rezoluce	Nastavte rozlišení videa	FHD, HD
Fotografie Kvalitní	Set the photo resolution	12 mil., 10 mil., 8 mil., 5 mil., 3 mil., 2 mil., 1.3 mil., 1 mil.
Smyčka Video	Set each video file délka	1 min, 2 min, 3 min, Off; If Off is chosen, the card will not be automatically overwritten
Mobilní detekce	Standby, automatic video detection of a moving object	VYPNOUT ZAPNOUT
Vyvážení bílé	Upravte jas obrazovky	Automatic, Sunlight, Overcast, Tungsten Lamp, fluorescenční Lamp
Kontrast	Adjust the color for the video	0, 1, 2, 3, 4, 5
Vystavení	Adjust exposure to prevent underexposure	0, -1/3, -2/3, -1.0, 1.0, 2/3, 1/3, 2/3
Spouštěcí video	Turn on automatic recording when the power is on	VYPNOUT ZAPNOUT
Obrazovka Ochrana	Set the time to turn off the screen	OFF, 3 minutes, 5 minutes, 10 minutes
Video zvuk	Enable or disable video sound	VYPNOUT ZAPNOUT
Parkoviště Sledování	Enable recording when external vibrations are detected while parked	VYPNOUT ZAPNOUT
G-senzor	Adjust collision sensitivity to prevent overwriting of important video files	OFF, 2G, 4G, 8G
Automatické vypnutí	Nastavte čas automatického vypnutí	OFF, 3 minutes, 5 minutes, 10 minutes
Datum	Nastavte datum a čas	Set year, month, day, hour, minute, second
Jazyk	Choose the menu language	English, Simplified Chinese, Traditional Chinese, German, French, Polish, Korean, Italian, Portuguese, Russian, Spanish, Thai
Časový vodoznak	Display the date in the video	VYPNOUT ZAPNOUT
Formát	Delete all data on the storage card	Potvrdit, zrušit
Obnovit Tovární nastavení	Obnovte všechna nastavení na výchozí tovární hodnoty	Potvrdit, zrušit
Verze	Zobrazte verzi softwaru	Číslo verze softwaru

ŘEŠENÍ PROBLÉMŮ

If you experience issues with the product under normal operating conditions, here are some solutions to common problems:

Cannot Boot:

Check if the recorder is properly connected to the car charger. In manual boot mode, check if the battery is low and needs recharging.
If needed, restore to factory settings using the RESET key.

Camera Automatically Stops Shooting or Non-Circular Recording:

Large HD video files may cause the memory card reader to lag.
Use a high-speed memory card (e.g., C10).
Non-circular recording may also occur if the G-sensor is activated, causing the memory files to be locked. Disable the G-sensor function and reformat the memory card.

Camera Settings for Recycling Video Not Working as Expected:

Check if the mobile detection function is enabled. Motion detection depends on the absence of movement in the scene.

Video and Image Not Clear: Check if the lens has fingerprints.
Clean the lens surface before recording to ensure clarity.
Inconsistent Video Quality: Camera effect is greatly influenced by lighting conditions and intensity. Adjust the settings as needed based on the environment.
Fringe Interference in Images: This is caused by “light frequency” errors under fluorescent lighting. Consider adjusting lighting or positioning.

Resetting the Device: Press the RESET button to restore the device to its initial settings.

Zaregistrujte produkt
Děkujeme, že jste si vybrali PyleUSA. Registrací svého produktu zajistíte, že získáte všechny výhody naší exkluzivní záruky a personalizované zákaznické podpory.
Vyplňte formulář pro přístup k odborné podpoře a pro udržení vašeho nákupu PyleUSA v perfektním stavu.

Začněte zde

Číslo modelu:
PLCMDVR49

Otázky nebo komentáře? Jsme tu, abychom vám pomohli! Telefon: 1.718.535.1800 XNUMX XNUMX XNUMX PyleUSA.com/ContactUs

Dokumenty / zdroje

PYLE PLCMDVR49 Autokamera a zadní kameraview Sada pro zrcadlový displej [pdfUživatelská příručka
PLCMDVR49 Autokamera a zadní kameraview Mirror Display Kit, PLCMDVR49, Car Camera and Rearview Mirror Display Kit, Rearview Mirror Display Kit, Mirror Display Kit

Reference

Uživatelská příručka

PYLE PLCMDVR49 Autokamera a zadní kameraview Sada pro zrcadlový displej

VLASTNOSTI

CO JE V KRABICE