Obsah
skrýt
MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller
Specifikace
- Název produktu: 5 in 1 SPI+DMX LED Controller (BLE+2.4G)
- Číslo modelu: SPIB5
- Rychlost IP: IP20
- Vstupní objemtage: DC 5V-24V
- Pracovní teplota: -10~40°C
- Výstupní proud: Max 10A
- Dimenze: 74.5 * 36 * 17 mm
- Výstupní signál:
- SPI (TTL) 800Kbps (Max 1024 Pixel)
- DMX: 250Kbps (Max 256 Pixel)
- Pohotovostní proud: 20 mA
- Protokol: BLE+RF 2.4GHz
- Osvědčení: CE, EMC, LVD, RED
Návod k použití produktu
SPI Mode Installation
- For SPI LED Strips, follow the SPI Installation Diagram provided. Ensure proper connections and power input within the specified range.
DMX Mode Installation
- For DMX LED Strips, follow the DMX Installation Diagram provided. Make sure to connect as per the instructions and input the correct power supply voltage.
Smart Phone APP Control
- Download and install the TUYA SMART APP from the application store.
- Párovací síť:
- Connect the controller to the mains and ensure the indicator is flashing quickly.
- You can correct the indicator status by long-pressing the SET button or powering off and on the controller 6 times.
- Connect your phone to a 2.4GHz home wifi network.
- Open the TUYA SMART APP, click on “Lighting and Light source (BLE+Wifi)” and follow the on-screen instructions to complete the pairing process.
Funkce produktu
- Support BLE+2.4GHZ wireless transmitting technology
- 5v1 SPI kontrolér, jednobarevný, CCT, RGB, RGBW, výběr výstupu RGB+CCT
- Rychlost, statický režim, dynamický režim a hudební režim jsou nastavitelné
- Dual SPI/DMX control protocol, compatible with DC5-24V input
- Dynamický režim: 28 druhů bílé barvy a 80 druhů barev RGB pro výběr, pro tyto režimy lze měnit barvu, jas, šířku a rychlost.
- 8 kinds of music modes work with the internal microphone and the smartphone microphone
- Volné přepínání mezi dynamickým režimem a hudebním režimem
- Setting up boot animation via TUYA APP
- Have DND mode, usually used in a power failure area, to save power
Parametr produktu
Dimenze
Schéma připojení
Schéma aplikace
Kompatibilní dálkový ovladač
( purchase separately)
Propojit/Odpojit
- Odkaz
- Power off for 10 seconds and power on again, or short-press “SET”
- Stiskněte tlačítko „ON“ třikrát během 3 sekund.
- Green flashing state, then the code is successful.
- The link fails if the light doesn’t flash. Please repeat the above steps
- Pozor: can not link again if the remote has already finished linking.
Odpojit
- Power off for 10 seconds and power on again, or short-press “SET”
- Stiskněte tlačítko „ON“ 5krát během 3 sekund.
- Red flashing state, then clear the code successfully.
- Unlink is failed if the light doesn’t flash, please repeat the above steps
- (Pozornost: no need to unlink if the light is never be linked)
Smart Phone APP Control
Pairing Network (doesn’t support 5G router)
- Download and install the “TUYA SMART” APP
- Search “TUYA SMART” in the application store or scan the QR code. Please register an account if using it for the first time, log in to your account if you already have account
- Search “TUYA SMART” in the application store or scan the QR code. Please register an account if using it for the first time, log in to your account if you already have account
- Párování sítě
- Connect the controller to the mains
- Ensure indicator flashes quickly 2 times per seconds)
- You have 2 ways to correct the indicator status
- Long-press press” SET” button
- Power off and power on the controller 6 times
- Connect the phone with the home Wi-Fi 2.4 GHz network
- Open the APP interface, click “+”
- Click “Lighting” and “Light source (BLE+Wifi)
- Complete the rest steps
Funkční instrukce
Statický režim
Adjust or save pure static illumination
- Napřample, regarding as App
Dynamic Mode ( select it via remote)
- 28 kinds of white color, 80 kinds of RGB color, save favorite modes, and 8 scenes mode, all modes can change color, brightness, width, and speed
Hudební režim
- 8 kinds of music modes work with the internal microphone andthe smart smartphone microphone
Setting Communication Protocol
- Setting it via APP
- Select SPI or DMX protocol
Setting the LED strip light
- Change output based on different LED strip lights like single color, CCT, RGB, RGBW, rgb+cct
- LED strip light types
Setting Pixel points
- Setting it via a program
- Slip the slider to change numbers
Kalibrace barev
- Correct the color of led strip light via APP
- Following the tip to complete color calibration
Spouštěcí animace
- Setting color or color temperature, speed and brightness
Funkce časovače
Setting it via APP
Režim DND ZAP/VYP
- Turn on DND mode ( usually used in power failure areas to save power)
Pokyny pro hlasové ovládání Alexa
- Please add the device to the [Tuya Smart] app, then start following the steps.
- Otevřete aplikaci Alexa
- Klikněte na „Více“ v pravém dolním rohu
- Klikněte na „Dovednosti a hry“
- Klikněte na „
“V pravém horním rohu - Type “Smart Life” and search
- Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control
Pokyny pro hlasové ovládání Google Home
Přidejte zařízení do aplikace [Tuya Smart] a poté začněte postupovat podle kroků
- Otevřete aplikaci Google Home
- Click “+” on the top left corner
- Klikněte na „Nastavit zařízení“
- Klikněte na „Works with Google“
- Kliknětev pravém horním rohu
- Type “Smart Life” and search
- Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control
Pozor
- Před instalací prosím vypněte napájení.
- Zajistěte prosím vstupní objemtage, aby byly stejné jako požadavky ze zařízení.
- Don’t disassemble the device if you are not an expert; otherwise, you will damage it.
- Please do not use the light in places with a wide range of metal areas or strong electromagnetic waves nearby, otherwise, the remote distance will be seriously affected.
Často kladené otázky
Can I control both SPI and DMX LED strips with this controller?
Yes, this controller supports both SPI and DMX LED strips. Follow the installation diagrams provided for each mode accordingly.
What is the maximum control distance for this LED controller?
The control distance for this LED controller is up to 30 meters.
Dokumenty / zdroje
 |
MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller [pdfUživatelská příručka SPIB5, C9, SPIB5 5 in 1 SPI Plus DMX LED Controller, SPIB5, 5 in 1 SPI Plus DMX LED Controller, SPI Plus DMX LED Controller, DMX LED Controller, LED Controller, Controller |