LTECH LED Controller (Single-zone)

The Mini Pro series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Technické parametry

Model	M1A	M1B	M2A	M2B	M4A	M4B	M5A	M5B
Barva	Bílý	Černý	Bílý	Černý	Bílý	Černý	Bílý	Černý
Typ stmívání	ZTLUMIT		CT		RGB/RGBW		RGBCW
Bezdrátový typ	RF 2.4 GHz
Pracovní voltage	3Vdc (Button battery CR2032×1)
Pohotovostní proud	＜ 2 uA
Distance of the remote	30M (Under unobstructed conditions)
Pracovní teplota	-25℃~50℃
Hmotnost	40g ± 10g
Rozměry	104×58×9mm (remote)，108×63×14mm (remote+hold)

Rozměry

Instalace produktu

Two ways to fix the remote holder :

1. Držák dálkového ovládání upevněte na stěnu dvěma šrouby.
2. Držák dálkového ovládání upevněte na stěnu pomocí 3M lepidla.
   • Poznámka: Před prvním použitím vytáhněte poutko baterie

Náhradní baterie

1. Use a screwdriver to unscrew the bottom screw
2. Pull out the battery compartment and replace the battery

Funkce tlačítek

Dimming Remote Control M1A/M1B

• Power: Turns the light on or off. Brightness
• Touch Ring: Touch to change the light’s brightness.
• Brightness +/-: Adjusts the brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 4 Brightness Settings: 25%, 50%, 75%, 100% (4 brightness levels with shortcut keys).
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• Power: Turns the light on or off. Color Temperature Touch Ring: Touch to change the light’s color temperature.
• Night Light: Switches to low brightness, night light mode.
• Brightness +/-: Adjusts brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 3 Color Temperatures: Cool White, White Light, Warm Light; 3 color temperature shortcut keys.
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

RGB/RGBW Remote Control M4A/M4B

• Power: Turns the lights on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Short press to switch dynamic modes; long press to adjust speed. Short press both “R” and “W” keys simultaneously to cycle through dynamic modes.
• Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• Red/Green/Blue: Short-press to turn the static red/green/blue channels on or off. Long press for 1-6 seconds to continuously adjust the brightness of the current channel.
• White Light: For RGBW lights, short-press to turn the W channel on or off; long-press for 1-6 seconds to continuously adjust the W brightness.
• Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5A/M5B

• Power: Turns the lights on or off.
• Touch Color Ring: Select colors using the touch color temperature/RGB color ring.
• Mode/Speed: Short press to switch between dynamic modes; long press to adjust speed. Short press the “R” and ” “ keys simultaneously to cycle through dynamic modes.
• Color Temperature: Short press to turn the color temperature channel on or off; touch the color ring to switch to the color temperature touch ring. Long press for 1-6 seconds to continuously adjust the brightness of the current color temperature.
• RGB: Short-press to turn the RGB channel on or off; touch the color ring to switch to the RGB touch ring. Long-press for 1-6 seconds to continuously adjust the brightness of the current color.
• Red/Green/Blue: Short press to turn the static red/green/blue channel on or off. Long-press for 1-6 seconds to continuously adjust the brightness of the current channel.
• Scene: Short press to recall the scene; long press for 3 seconds to save the currentlighting state to the scene.

Barva	R/G/B values
Červený	R100% G0% B0%
Žluť	R100% G100% B0%
Zelený	R0% G100% B0%
azurová	R0% G100% B100%
Modrý	R0% G0% B100%
Fialová	R100% G0% B100%
Bílý	R100% G100% B100%

Dynamický režim	Red-purple gradient	Statický režim	Červený
	Blue-purple gradient
			Zelený
	Color temperature gradient (warm yellow, cool white)
			Modrý
	Three-color gradient (RGB)
	Six-colo  gradient (red, green, blue, yellow, purple, cyan)		Žluť
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Fialová
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)
			azurová
	Three-color gradient (RGB)
			Mixed light white
	White gradually brightens and darkens

Used with P series controllers

Párování kódu

Key pairing code

1. Short-press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Poznámka: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Vymazat kód

To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together

Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning. *Remote controls of the same model can learn from each other.

Vymazat kód
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Stav kontrolky

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.
  • Poznámka: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Doprava a skladování

1. Transportation Products can be shipped via vehicles, boats, and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process.
2. Storage: The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Pozornost

Please use in a dry indoor environment:

• When installing the battery. pleæeconnectthepositive and negative terminals correctly. Ifthe remote will not be used for along period, take the battery out.
• When the remote distance is shorten and or the remote dæsn’t work frequently, please change the battery in time.
• Please carefully take it and put it down to prevent falls that cause damage.
• please donotattemptto fix products by yourself. If you have any question please contact your suppliers
• Tato příručka podléhá změnám bez dalšího upozornění. Funkce produktu závisí na zboží. Máte-li jakékoli dotazy, neváhejte kontaktovat naše oficiální distributory.

Smlouva o záruce

• Záruční doby od data dodání: 5 let
• Free repair or replacement serv’icæ for quality problems is provided within warranty periods. Warranty exclusions below:
• Následující podmínky nespadají do záručního rozsahu bezplatné opravy nebo výměny:

Beyond warranty periods:

• Jakékoli umělé poškození způsobené vysokým objtage. overload. or improper operations; Products with severe physical damage:
• Škody způsobené přírodními katastrofami a vyšší mocí;
• Záruční štítky a čárové kódy byly poškozeny.
• No contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law
2. Our company has the right to amend or adjust the terms of this warranty. and release in written form shall prevail.

VAROVÁNÍ

• NEBEZPEČÍ POŽITÍ: Tento výrobek obsahuje knoflíkovou nebo knoflíkovou baterii.
• Při požití může dojít ke SMRT nebo vážnému zranění.
• Spolknutí knoflíkového článku nebo knoflíkové baterie může způsobit vnitřní chemické popáleniny již za 2 hodiny.
• Nové a použité baterie UCHOVÁVEJTE MIMO DOSAH DĚTÍ
• Okamžitě vyhledejte lékařskou pomoc, pokud existuje podezření na spolknutí baterie nebo její vložení do jakékoli části těla
  • a) Vyjměte a okamžitě recyklujte nebo zlikvidujte použité baterie v souladu s místními předpisy a uchovávejte je mimo dosah dětí. Baterie NEVhazujte do domovního odpadu ani je nespalujte.
  • b) I použité baterie mohou způsobit vážné zranění nebo smrt.
  • c) Zavolejte místní toxikologické centrum pro informace o léčbě.
  • d) The compatible battery type: CR2032.
  • e) Jmenovitý objem baterietage: 3Vdc.
  • f) Nenabíjecí baterie se nesmí dobíjet.
  • g) Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.
  • h) Ujistěte se, že jsou baterie vloženy správně podle polarity (+ a -).
  • i) Nekombinujte staré a nové baterie, různé značky nebo typy baterií, jako jsou alkalické, uhlík-zinkové nebo dobíjecí baterie.
  • j) Vyjměte a okamžitě recyklujte nebo zlikvidujte baterie ze zařízení, které nebylo delší dobu používáno v souladu s místními předpisy.
  • k) Vždy zcela zajistěte přihrádku na baterie. Pokud nelze přihrádku na baterie bezpečně uzavřít, přestaňte výrobek používat, vyjměte baterie a uchovávejte je mimo dosah dětí.

Dokumenty / zdroje

LTECH LED Controller (Single-zone) [pdfUživatelská příručka M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B, EX4S Single Zone RF-DMX RGBW Controller, EX4S, Single Zone RF-DMX RGBW Controller, RF-DMX RGBW Controller, RGBW Controller, Controller

Reference

• Uživatelská příručka