Fenix PB-E01 Flashlight Instruction Manual

Fenix PB-E01 Flashlight

Specifikace

• Model: PB-E01
• Kapacita: 5000 XNUMX mAh
• Bateriový článek: 21700
• Parametr: Typ-C
• Lamp Korálek: 1W LED
• výstup: 5V-2.4A (12W)
• Vstup: 5V-2.4A (12W)
• Závěsné lano: Typ-C až typ-C
• Barva: Černá a žlutá
• Materiál: ABS+PC (V0 fireproof)+PC cutting lens
• Svítilna: lamp head 1W
• Velikost: 28 * 30 * 87 mm
• Hmotnost: 118 g

This device, equipped with a flashlight, is compact in size, making it perfect for travel and daily use. Easy to fit into pockets or bags, it is an essential accessory for active individuals who value time and convenience. The formula for calculating battery capacity is: actual capacity (mAh)=(nominal capacity x 3.7V x efficiency)/output voltage (5V). The efficiency of high-quality power banks is usually between 85% and 90% (0.85-0.9), while the remaining electricity is converted into heat. Taking a 5000mAh power bank with an efficiency of 90% (0.9) as an example: (5000mAh x 3.7V/5V) x 0.9=3300mAh.

Návod k použití

1. Connect the provided Type-C to Type-C hanging rope or any compatible Type-C cable to the input port of the PB-E01.
2. Druhý konec kabelu připojte ke kompatibilnímu napájecímu adaptéru USB (není součástí balení) nebo k napájenému portu USB.
3. The device will begin charging. Refer to the device’s indicators (if any) for charging status.

Použití baterky

1. Locate the power button for the flashlight function.
2. Press the power button once to turn on the 1W LED flashlight.
3. Press the power button again to turn off the flashlight.

Použití jako powerbanky

1. Connect your device (e.g., smartphone, tablet) to the output port of the PB-E01 using a compatible Type-C cable.
2. The PB-E01 will automatically begin charging your connected device.
3. Po dokončení nabíjení odpojte zařízení.

Odstraňování problémů

• Zařízení se nenabíjí: Ensure the charging cable is securely connected to both the PB-E01 and the power source. Verify that the power source is active.
• Svítilna se nezapíná: Check if the PB-E01 has sufficient charge. If the battery is depleted, charge the device first.
• Connected device not charging: Ensure the cable connecting your device to the PB-E01 is functioning correctly and is securely plugged in. Try a different cable if necessary.
• Pomalé nabíjení: Ensure you are using a compatible 5V-2.4A (12W) power adapter for optimal charging speed.