Dauer 490409 Remote Control Owner’s Manual

Dauer 490409 Remote Control

Specifikace

• Název produktu: Remote control and matching receiving module
• Model dálkového ovládání: QB187-433TX-B5
• Receiving Module Model: QB08-433RX-01
• RF frekvence: 433.92 MHz
• Technika modulace: POŽÁDAT
• Antenna Frequency Range: 433 Function PCB

Návod k použití

Provoz dálkového ovládání

1. Zapnutí/vypnutí: The remote control is used to remotely control the power on/off of all connected devices.
2. Zapínání: Press and hold the remote control button (indicated by the symbol in the original text, assumed to be a power button icon) to turn on the device. The remote control indicator light will illuminate simultaneously.
3. Vypínání: Press and hold the same remote control button again to turn off the device. The remote control indicator light will turn off when the button is released.
4. Výchozí stav: The default initial state of the device is off.

Receiving Module Functionality

• When the remote control button is pressed, the MCU detects the button closure and modulates a transmission signal through the RF section of the integrated chip at 433.92 MHz.
• Upon button press, the receiving module decodes the signal and outputs a high level on the DATA pin.
• When the button is released, the receiving module fails to decode the signal, resulting in a low-level output on the DATA pin.

Odstraňování problémů

• Zařízení nereaguje: Ensure the remote control batteries are not depleted. Check that the receiving module is properly powered and connected to the device. Verify that there are no obstructions between the remote control and the receiving module.
• Kontrolka nesvítí: If the remote control indicator light does not illuminate when the button is pressed, the remote control battery may be dead or the remote control itself may be faulty.
• Rušení: This device complies with part 15 of the FCC Rules, meaning it should not cause harmful interference and must accept any interference received. If you experience unexpected operation, try moving the device away from other electronic equipment that might be causing interference.

Upozornění FCC

Toto zařízení splňuje část 15 pravidel FCC. Provoz podléhá následujícím dvěma podmínkám:

1. Toto zařízení nesmí způsobovat škodlivé rušení a
2. This device must accept any interferenæ received, including interference that may cause undesired operation.

Jakékoli změny nebo úpravy, které nejsou výslovně schváleny stranou odpovědnou za shodu, mohou zrušit oprávnění uživatele provozovat zařízení,

Poznámka: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio. However, there is no guarantee that interferenæ Will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Přeorientujte nebo přemístěte přijímací anténu.
• Zvětšete vzdálenost mezi zařízením a přijímačem.
• Připojte zařízení do zásuvky v jiném okruhu, než ke kterému je připojen přijímač.
• Consult the dealer or an experienæd radi0/TV technician for help.

The deviæ has been evaluated to meet general RF exposure requirements. The device can be used in portable condition without restriction.