Cosmic Byte Drakon Wireless Controller User Manual

Cosmic Byte Drakon Wireless Controller

Specifikace

Model	DARtAlKaOsN TRI-MODE MOUSE WIRELESS CONTROLLER (Cosmic Byte Drakon Controller)
Režimy připojení	Wired (PC), 2.4G Wireless (PC/Android), Bluetooth (PC/Android/iOS)
Nabíjení	Charging dock (USB power) and USB-C cable; LED indicates blinking (charging) and steady (fully charged)
Výdrž baterie	Až 820 hodiny (v závislosti na používání)
Audio jack	3.5 mm audio jack (PC only; supported only in PC mode when using 2.4 GHz wireless or wired USB). Not functional in Bluetooth mode or on consoles/mobile.
Makro tlačítka	Two programmable macro buttons (ML/MR); macros store up to 22 inputs, including delays
Spouštěcí zámek	3-position travel limit switch per trigger (LT/RT): Position 1 shortest (digital ON/OFF), Position 2 medium (~50% analog), Position 3 longest (100% analog)
Vyměnitelné díly	Magnetic top covers; extra D-pads (including precision D-pad) and extra joystick tops
Automatická správa napájení	Auto sleep after 5 minutes no activity; disconnected from dongle for 30 seconds

Rychlé nastavení

1. Connect (2.4G Wireless): Insert the 2.4G USB dongle (stored under the magnetic top cover for travel). Press X + DOMŮ (X-Input) or FNR + HOME as indicated for the required input mode (2.4G). For PC X-Input, use X + DOMŮ; for 2.4G D-Input, use FNR + HOME.
2. Connect (Bluetooth): Press the pairing shortcut based on platform/input mode: PC: B + DOMŮ; Android: A + DOMŮ; iOS: Y + DOMŮ (or as listed for the desired mode). Long-press actions require 3 seconds.
3. Connect (Wired PC keyboard & mouse mode, if needed): For PC (wired/2.4G mentioned in the manual), press and hold FNR + FNL for 3 seconds to enter keyboard & mouse mode.
4. Účtovat: Use the charging dock or connect the included USB-C cable to a 5V USB power source. Blinking LED indicates charging; steady LED indicates fully charged.
5. RGB control: Change RGB mode with FNL + SELECT. Turn off all RGB by holding LT + RT for 5 seconds.

HLAVNÍ ÚDAJE

Návštěva www.thecosmicbyte.com to download the software for the controller

ZAVEDENÍ

Thank you for choosing the Cosmic Byte Drakon Controller, engineered with precision components, TMR joysticks, mechanical switch buttons, RGB lighting, macro functionality, and modular hardware.
The Drakon is built for gamers who demand:

• Accurate joystick tracking
• Fast and crisp mechanical button input
• Customizable triggers
• Programmable macros
• Multiple connectivity modes
• Interchangeable parts and magnetic covers
• Charging dock convenience

This detailed manual explains every function clearly and step-by-step.

Obsah balení

Your Drakon kit includes:

1. Drakon Wireless Controller
2. 2.4G USB dongle
3. Kabel USB-A na USB-C (2 m)
4. Nabíjecí dok
5. Přepravní pouzdro
6. 3 Magnetic Top Covers
7. . 2 Additional D-Pads
   1. Precision D-Pad
   2. Circular/Disc D-Pad
8. 2 Extra Joystick Tops
9. Uživatelská příručka

REPLACEABLE MAGNETIC TOP COVER SYSTEM

The Drakon allows cosmetic customisation using magnetic covers. To remove the top cover:

• Locate the slight gap or lift point near the front edge.
• Insert your finger under the edge and gently pull upward.
• Magnets will release, lifting the cover off smoothly.

To install a cover:

• Align the new top cover with the controller’s frame.
• Lower it gently onto the surface.
• The magnetic locks automatically secure it.

Úložiště dongle
Under the top cover is a dedicated storage slot:

• Insert the 2.4G dongle into the slot when traveling.
• The dongle clicks into place and will not fall out.

EXTRA D-PADS & JOYSTICK TOPS

Changing the D-Pad

• Grip the current D-pad.
• Pull upward to detach.
• Align the replacement D-pad.
• Press down until it locks in place.

Changing Joystick Tops

• Hold the joystick stem firmly.
• Pull the existing top straight up.
• Push the new joystick top onto the stem until it snaps.

Výhody:

• Precision D-pad → Fighting & platformers
•  Disc D-pad → Racing & casual play
• Joystick tops → Comfort or enhanced grip

NABÍJENÍ REGULÁTORU

Charging with the Dock

• Connect the dock to USB power.
• Place the controller onto the magnetic contacts.
• Dock LED On → Charging
• Dock LED Off → Fully charged

Nabíjení pomocí kabelu

• Connect the USB-C cable to the controller.
• Plug into any 5V USB power source.
• LED Blinking → Charging
• LED Steady → Fully charged

Battery Behavior

• RGB lights turn off when the battery is low
• Vibration may reduce or disable automatically
• Battery life: 8–20 hours depending on usage

MM AUDIO JACK (PC ONLY)

• The controller features a 3.5 mm audio jack for headset connection.
• Audio output and microphone input are supported only in PC mode when using 2.4 GHz wireless or wired USB connection.
• The audio jack is not functional in Bluetooth mode or on consoles/mobile devices.

PRŮVODCE PŘIPOJENÍM

KABELOVÝ REŽIM

PLATFORMA	VSTUPNÍ REŽIM	HOW TO CONNECT (PRESS FOR 3 SEC)	STAV LED
PC	X-vstup	Plug into PC and   press HOME to start	LED2 stays ON
	D-vstup	Under X-Input, FNR + HOME	LED3 stays ON
Android	D-vstup	Plug into Android device   and press HOME to start	LED3 stays ON
	X-vstup	Under D-Input, FNR + HOME	LED2 stays ON
iOS	—	Není podporováno	—

GHZ WIRELESS MODE

PLATFORMA	VSTUPNÍ REŽIM	HOW TO CONNECT (PRESS FOR 3 SEC)	STAV LED
PC	X-vstup	Press X + HOME	LED2 stays ON
	D-vstup	Under X-Input, FNR + HOME	LED3 stays ON
Android	D-vstup X-vstup	Press X + HOME Under D-Input, FNR + HOME	LED3 stays ON LED2 stays ON
	Režim myši	CAPTURE + R3 for 5 seconds A = Left Click B = Right Click	LED3 Stays ON LED4 Stays ON
iOS	—	Není podporováno	—

REŽIM BLUETOOTH

PLATFORMA	VSTUPNÍ REŽIM	HOW TO CONNECT (PRESS FOR 3 SEC)	STAV LED
PC	X-Input D-Input Gyroskopický režim	Press B + HOME; press A + HOME Press Y + HOME	LED2 stays ON LED3 stays ON LED4 stays ON
Android	D-Input X-Input Gyroskopický režim	Press A + HOME Press B + HOME Press Y + HOME	LED3 stays ON LED2 stays ON LED4 stays ON
iOS	X-vstup Gyroskopický režim	Press B + HOME   Press Y + HOME	LED2 stays ON   LED4 stays ON

Důležité poznámky k použití

• Gyro Mode is exclusively available when using Bluetooth mode.
• Support for iOS is limited and may vary depending on the specific game or application.
• The LED indicators on the controller confirm both the active mode and the connection status.
• To switch modes, a long-press duration of 3 seconds is required.

HOME BUTTON FUNCTIONS

AKCE	JAK PROVÁDĚT	VÝSLEDEK
Wake Controller	Stiskněte HOME	Turns on controller
Vynutit párování	Podržte 3 sekundy	LED flashes, pairs
Režim spánku	Podržte 5 sekundy	Turns off controller
Toggle X/D	Hold 3 sec (2.4G PC)	Switch input type

TURBO MODE (STEP-BY-STEP)

Buttons that support Turbo:
A, B, X, Y, LB, RB, LT, RT

Set Turbo (Semi-Auto):

• Press TURBO
• Stiskněte jednou požadované tlačítko
• Uvolnění
• → Turbo enabled

Set Turbo (Full Auto):
Repeat the same input.

Turn Off Turbo for a Button
Repeat the same input.

Turbo Speed Levels
Stiskněte FNL + Turbo, then move the Right Joystick Left/Right

• Slow: 5 shots/sec
• Medium: 15 shots/sec
• Fast: 25 shots/sec

SEŘÍZENÍ VIBRACÍ

Držet FNL + Right Joystick Up/Down procházet:

• Vypnuto
• Nízký
• Střední
• Vysoký

Vibration feedback confirms each level.

RGB LIGHTING SYSTEM

The Drakon includes RGB under both joysticks and the controller body.

Změňte režim RGB
Press FNL + SELECT, cycling through:

• Duhový režim
• 7-barevný přechod
• Dýchací efekt
• Fixed color mode

Change Color (Fixed Mode)

• Press FNR + START
• Colors: Red → Orange → Yellow → Green → Cyan → Blue → Purple → White

Ovládání jasu

• Increase → FNR + D-Pad Up
• Decrease → FNR + D-Pad Down

Turn Off All RGB
Hold LT + RT (5 seconds)

TRIGGER LOCK SYSTEM (3-LEVEL ADJUSTMENT)

(L-DKEY1, L-DKEY3, R-DKEY1, R-DKEY3)

Positions & Signal Type
Each trigger (LT / RT) is equipped with an independent 3-position travel limit switch:

Position 1 – Shortest Travel

• Digital signal output.
• The trigger functions as a simple ON/OFF button.

Position 2 – Medium Travel

• Analog signal output.
• Approximately 50% of full trigger travel is available.

Position 3 – Longest Travel

• Analog signal output.
• 100% of full trigger travel is available.

Digital vs. Analog Signal
In certain games (for example, racing titles):

Digital signal:

• The action is either fully inactive or fully active (e.g., car acceleration is either off or at maximum, with no gradual control).

Analogový signál:

• The action responds proportionally to how far the trigger is pressed (e.g., light press for slow acceleration, full press for maximum speed).

MACRO BUTTONS (ML–MR) — DETAILED GUIDE

The Drakon includes two programmable macro buttons:

• ML / MR → Back side

Macros can store up to 22 inputs, including delays. Programmable Inputs: D-pad, ABXY, LB/RB, LT/RT, L3/R3, LX/LY Axis, RX/RY Axis

• A. Enter Macro Recording Mode
  • For ML → FNL + ML
  • For MR → FNR + MR

Controller vibrates once.

• B. Recording a Macro
  • Enter macro mode.
  • Press your sequence of buttons.
  • Delays between presses are recorded automatically.
  • Press the SAME M-button to save.
  • A short vibration confirms completion.
• C. Clear a Macro
  Enter macro mode → press the same M-button with no inputs → vibration confirms deletion.
• D. Interrupting a Macro
  Press ANY non-macro button.

FACTORY RESET (TURBO / VIBRATION / MACRO)
Press and hold L1 + R1 + L2 + R2 + L3 + R3 simultaneously. The controller will vibrate for 1 second to confirm the reset, restoring all Turbo, Vibration, and Macro settings to their factory defaults.

CUSTOMISATION SETTINGS

• A. Swap Joystick Round/Square Angle Mode
  Hold L3 + TURBO (2 seconds)
• B. Swap Left Joystick ↔ D-Pad
  Hold L3 + CAPTURE (2 seconds)
• C. Swap A/B/X/Y Layout
  Hold TURBO + R3 (2 seconds)
• D. D-Pad 4-Way / 8-Way Mode Switch
  Hold Select + D-Pad Right (3 seconds)

JOYSTICK CALIBRATION (TMR SYSTEM)

Kdy provést kalibraci

• Slight drift
• After firmware updates
• After physical impact

Kroky kalibrace

• Vypněte ovladač.
• Hold CAPTURE, then press HOME to power ON.
• LED1 blinks→ Calibration Mode.
• Press A to begin. LED 2 blinks.
• Rotate both joysticks three full circles.
• Press LT and RT three times each.
• Press A again to save & exit.
• LED returns to normal.

SLEEP MODE & POWER MANAGEMENT

Auto Spánek

• No activity for 5 minutes
• Disconnected from dongle for 30 seconds

Probuďte se
Stiskněte HOME

FUNKCE RESET
If controller becomes unresponsive:

• Use a pin or thin tool.
• Press and hold RESET for 1 second.
• Controller restarts normally.

CONSOLE COMPATIBILITY DISCLAIMER

This controller is not supported on any gaming console. There is no warranty, service, or technical support provided for use with consoles. The controller is specifically designed and optimized for PC use, and functionality on consoles is neither intended nor guaranteed. Any attempt to use the controller with a console is done at the user’s own risk.

BEZPEČNOST A PÉČE

• Use only 5V charging adapters
• Do not expose to water or temperature extremes
• Clean with soft dry cloth
• Store in the provided carrying case
• Replace covers carefully—do not force magnets
• Do not disassemble internal electronics

KEYBOARD & MOUSE MODE (PC, 2.4G/WIRED ONLY)
On PC, simultaneously press and hold FNR + FNL for 3 seconds to enter wired keyboard & mouse mode. The controller can then be used as a keyboard and mouse. See the Key Mapping Table for details.

KEY MAPPING TABLE

Popisek / Funkce	Android režimu	PC D-input wired mode	PC X-input wired mode	Klávesnice Mapa
Tlačítko A	A	3	1	PLOCHA
Tlačítko B	B	2	2	C
Button X	X	4	3	F
Button Y	Y	1	4	R
D-pad UP	D-pad UP	POV UP	POV UP	W
D-pad VPRAVO	D-pad VPRAVO	POV RIGHT	POV RIGHT	D
D-pad DOLŮ	D-pad DOLŮ	POV DOWN	POV DOWN	S
D-pad VLEVO	D-pad VLEVO	POV LEFT	POV LEFT	A
L Stick Up	L Stick Up	L Stick Up	L Stick Up	W
L Stick Right	L Stick Right	L Stick Right	L Stick Right	D
L Stick Down	L Stick Down	L Stick Down	L Stick Down	S
L Stick Left	L Stick Left	L Stick Left	L Stick Left	A
LB	LB	5	5	Q
RB	RB	6	6	E
LT	LT	7	Z Axis R	Myš doprava
RT	RT	8	Z Axis L	Myš vlevo
Klikněte levou páčkou	L3 (Press)	11	9	Posun
Klikněte pravým tlačítkem	R3 (Press)	12	10	Střední myš
Vybrat	VYBRAT	9	7	Čepice
Start	START	10	8	Tab
Turbo	TURBO	TURBO	TURBO	TURBO
Zachyťte	Zachyťte	Zachyťte	Zachyťte	Zachyťte
Home / Mode	HOME / MODE	13	13	ESC

ZÁRUKA

• The Drakon wireless Controller carries 1 year warranty against manufacturing defects only.
• Physical damage, water damage, and tampna výrobky se nevztahuje záruka.

Scan the QR Code to know the Warranty Claim Procedure.

Odstraňování problémů

1. Controller does not power ON: Charge using USB power for at least 20 minutes; then press DOMOV once. If still unresponsive, press and hold RESET for 1 second (use a pin) and retry.
2. Ovladač se nenabíjí: Ensure dock is connected to power and align controller with dock pins. Confirm charging LED behavior (blinking = charging, solid = fully charged). Use a 5V USB adapter only, try a different cable/port, and gently clean charging pins with a dry cloth.
3. Not detected on PC/mobile: For wired mode, use a data-capable USB cable and try another USB port; on Android ensure OTG is enabled, then press DOMOV after connecting. For 2.4G, ensure the dongle is inserted properly and press X + DOMŮ; if not detected, remove dongle, press RESETOVAT, reinsert, and retry.
4. Bluetooth pairing fails/disconnects: Fully charge the controller, keep within 12 metrů during pairing, and disable nearby unused Bluetooth devices. Try switching Bluetooth mode using the platform shortcuts listed in the manual (e.g., PC: B + HOME).
5. Buttons not working / wrong mapping: Switch input mode with FNR + HOME (3 seconds) in 2.4G PC mode. Reset ABXY layout by holding TURBO + R3 (2 seconds), then check in-game control settings.
6. Joystick drift / inaccurate movement: Recalibrate. Power off, hold ZACHYTITa poté stiskněte DOMOV to power on. When calibration mode starts, press A, rotate both joysticks 3 full circles, press LT a RT three times each, then press A uložit.
7. Triggers not responding properly: Verify trigger lock position under LT/RT. For analog games, move to Level 3 (Full Travel) and test in-game.
8. Vibrace nefungují: Set vibration level by holding FNL + Right Joystick Up/Down to choose Off/Low/Medium/High (set to Medium or High). Also ensure vibration is enabled in game settings.
9. RGB not turning on: Increase brightness with FNR + D-pad Up (or cycle modes using FNR + SELECT) and turn RGB on by holding LT + RT (5 seconds). Charge fully if the battery.
10. Emergency reset (frozen/unresponsive): Stiskněte RESETOVAT for 1 second using a pin/thin tool. Controller restarts; reconnect using the desired mode.

Podrobnosti podpory

• Customer Care Number: +91 7351615161 (Mon-Sat 10 am to 6pm) WhatsApp Support: +91 7351615161
• E-mail: cc@thecosmicbyte.com