coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Konfigurace sítě

1. Zapněte produkt
   • Align the opener to the slot
   • Otočte kryt baterie proti směru hodinových ručiček, abyste jej otevřeli
   • Remove the battery insulation film to power
2. Stiskněte tlačítko RESET po dobu 3 sekund a poté jej uvolněte, červená LED dioda bude blikat při konfiguraci sítě.

Pokyny k instalaci

Montážní poloha
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Přečtěte si prosím pozorně návod a používejte výrobek správně
Děkuji za nákupasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Popis produktu

Tipy:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Parametry produktu

• Product Name Zigbee Ambient Light Sensor
• Bezdrátový protokol Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm