Zigbee2MQTT is an open-source bridge software that integrates hundreds of Zigbee devices with MQTT networks, removing the need for proprietary vendor hubs.
Zigbee2MQTT is a highly popular open-source software project that acts as a bridge between Zigbee wireless networks and MQTT-based home automation ecosystems. By using a compatible Zigbee USB dongle, users can run Zigbee2MQTT on a standalone server or within platforms like Home Assistant, effectively replacing proprietary vendor gateways.
It supports thousands of devices from hundreds of manufacturers, offering local, cloud-free control over smart sensors, lights, switches, and soil testers. Zigbee2MQTT provides a comprehensive network map, advanced device configuration, over-the-air (OTA) updates, and a rich Web UI for effortless smart home management.
Nejnovější manuály od manuals+ vytvořeno pro tuto značku.
Podívejte se na videa o nastavení, instalaci a řešení problémů pro tuto značku.
Časté dotazy ohledně manuálů, registrace a podpory této značky.
Open the Zigbee2MQTT Web UI and click 'Permit join'. Then, put your Zigbee device into pairing mode (usually by holding the reset button for 3-5 seconds until the LED flashes). Once paired, the device will automatically appear in your dashboard.
You need a smart host (like a Raspberry Pi, NAS, or generic PC running Home Assistant) and a supported Zigbee 3.0 USB dongle (such as ones based on the EFR32MG21 or CC2652P chipsets) to act as the coordinator.
Navigate to Settings > Add-ons > Add-on Store. Add the official Zigbee2MQTT repository URL, install the add-on, configure your USB dongle's serial port path in the configuration tab, and start the service.