Washloo is a UK-based brand specializing in luxury electric bidet toilet seats and smart toilets designed for enhanced personal hygiene and comfort.
Washloo is a dedicated UK provider of luxury electric bidet toilet seats and all-in-one smart toilets. Known for promoting a 'Cleaner, Greener and intelligent' lifestyle, the brand offers a sophisticated alternative to traditional bathroom hygiene. Their comprehensive range aims to blend advanced technology with seamless bathroom integration.
The product lineup includes popular models like the Ultra, Prestige, Supreme, Sensation, and Classic. These units feature cutting-edge innovations such as adjustable temperature wash sprays, warm air dryers, heated seats, and built-in deodorization capabilities. Washloo products emphasize user comfort, eco-friendliness, and accessible bathroom independence for all ages.
Designed with safety and simplicity in mind, Washloo bidets often come standard with intuitive remote controls, customizable user settings, and special gentler wash cycles specifically tailored for children or elderly users. Furthermore, they provide detailed installation guides and strong warranty frameworks to ensure long-lasting performance and ease of use in modern households.
Nejnovější manuály od manuals+ vytvořeno pro tuto značku.
Časté dotazy ohledně manuálů, registrace a podpory této značky.
Press the 'Water Temp' button on your remote control to cycle through the temperature settings: LOW, MEDIUM, HIGH, and OFF. It may take a few seconds for the change to be felt through the water flow.
Yes, users with sensitive skin or who have difficulty adjusting temperatures should set settings to 'low' or 'off'. Many models also feature a dedicated 'Child/Baby Function' that uses a gentler wash cycle and automatically adjusts the settings.
Using the side control on the unit, press and hold the 'STOP' and 'REAR WASH' buttons for roughly 5 seconds until it beeps, entering pairing mode. Then, press the 'STOP' button on your new remote. The smart toilet will beep again to confirm successful pairing.
Reduced water pressure may indicate a clogged inline filter. Close your main shut-off valve, use the provided spanner tool to remove the filter from the T-Piece, clean out any debris with a small brush, rinse it thoroughly, and then reinstall it.