Baseline manufactures professional diagnostic and measurement instruments used in physical therapy, rehabilitation, and sports medicine, including dynamometers and goniometers.
Základní linie is a prominent brand of measurement and evaluation instruments manufactured by Fabrication Enterprises Inc. (FEI). Widely used by physical therapists, occupational therapists, and healthcare professionals, Baseline products are designed to accurately measure muscle strength, range of motion, and sensory perception.
The product lineup includes hydraulic hand and wrist dynamometers, pinch gauges, goniometers, inclinometers, and sensory evaluators like monofilament pens. Known for their durability and clinical accuracy, Baseline instruments often feature industry-accepted designs essential for tracking patient progress during rehabilitation. The brand provides a comprehensive range of tools suitable for both clinical settings and routine medical screenings.
Nejnovější manuály od manuals+ vytvořeno pro tuto značku.
Časté dotazy ohledně manuálů, registrace a podpory této značky.
To reset the maximum reading pointer, rotate the small knurled knob on the dial indicator counter-clockwise until the red pointer rests against the black pointer at the zero marking.
Grip surfaces should be cleaned with a mild disinfectant between patients. Do not submerge the unit in water or other liquids, as they are precision instruments.
The unit is sealed and calibrated at the factory. However, if the indicator needle is out of the zero-range, it can be reset by removing the clear cover and adjusting the pin near the 220Kg marking. If fluid leaks, the unit must be returned to the factory.
Many Baseline hydraulic instruments, such as the wrist dynamometer and pinch gauges, typically carry a 1-year or 2-year manufacturer's warranty covering parts and labor. Check your specific product manual for details.
Slide the battery cover down to remove it. Push the metal clip outward to release the battery. Insert a new 3V CR2032 battery with the positive (+) side facing out, then replace the cover.