SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel) Instruction Manual

1. Přesview

The SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel) is designed to provide intelligent control over your lighting. This device integrates seamlessly with various smart home platforms, offering convenience through touch, app, and voice control. It features Matter compatibility, allowing for broad ecosystem integration, and includes an independent relay mode to ensure continuous smart light functionality.

Klíčové vlastnosti:

• Kompatibilita hmoty: Seamless integration with Matter-enabled devices and platforms like Apple Home, Google Home, and Amazon Alexa.
• Independent Relay Mode: Prevents smart lights from going offline due to physical button presses, maintaining app and voice control.
• Nighttime LED Button Indicator: Dimmable LED backlight for easy location in the dark, adjustable to user preference.
• Remote Control & Smart Scenes: Control lights remotely via the eWeLink app over 2.4GHz Wi-Fi, set schedules, and create automated scenes.
• 120-Type Panel Design: Standard design suitable for most North American junction boxes, supporting neutral-wire setups.

Obrázek: Přední strana view of the SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel).

2. Bezpečnostní informace

Please read all safety information before installing or operating the device to prevent electric shock, fire, or injury. Keep this manual for future reference.

• VAROVÁNÍ: Před zahájením jakýchkoli elektrických prací vždy vypněte napájení jističem. Pokud tak neučiníte, může dojít k vážnému zranění nebo smrti.
• Installation should be performed by a qualified electrician or service personnel.
• Ensure the device is installed in a dry indoor environment.
• Do not exceed the maximum load ratings specified in the product specifications.
• Verify that your home's electrical wiring includes a neutral wire, as this device requires one for proper operation.

3. Obsah balení

The package for your SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel) should contain the following items:

• SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel)
• Montážní šrouby
• Uživatelská příručka (tento dokument)

4. Nastavení a instalace

Follow these steps to install and set up your SONOFF TX Gen2 Smart Wall Touch Switch.

4.1 Fyzická instalace

1. Vypnout napájení: Before starting, ensure the power is turned off at the circuit breaker to avoid electric shock.
2. Demontáž starého spínače: Carefully remove your existing wall switch from the junction box.
3. Separate Front Panel: Use a flat-head screwdriver to gently pry off the front glass panel from the main body of the SONOFF switch. This exposes the wiring terminals.
   

   Obrázek: Zpět view of the SONOFF TX Gen2 switch, showing the wiring terminals and Matter QR code.

4. Zapojení: Connect the wires from your wall to the corresponding terminals on the SONOFF switch.
   • Připojte Neutrální vodič (N) to the 'N' terminal.
   • Připojte Live Wire (L) to the 'L' terminal.
   • Připojte Load Wire (L1) to the 'L1' terminal. (For 1-channel switch, only L1 is used).

   Ensure all connections are secure by tightening the terminal screws. Refer to the wiring diagram below for visual guidance.

   

   Image: Wiring diagram for the SONOFF TX Gen2 Smart Wall Touch Switch, showing connections for Neutral, Live, and Load wires.

5. Namontujte spínač: Carefully place the wired switch module into the wall junction box and secure it with the provided screws.
6. Připevněte přední panel: Snap the front glass panel back onto the switch module.
7. Obnovit napájení: Turn the power back on at the circuit breaker. The switch's LED indicator should light up.

4.2 Spárování aplikací

The SONOFF TX Gen2 switch supports pairing via the eWeLink app or a Matter-compatible app.

1. Stáhnout aplikaci: Download the eWeLink app from your device's app store (iOS/Android) or use a Matter-compatible app like Apple Home, Google Home, or Amazon Alexa.
2. Naskenujte QR kód: Open the chosen app and select the option to add a new device. Scan the Matter QR code located on the back of the switch module or on the last page of this manual.
   

   Image: Quick Use guide illustrating eWeLink app pairing and Matter QR code scanning for device addition.

3. Zadejte podrobnosti o Wi-Fi: Follow the on-screen prompts to connect the switch to your 2.4GHz Wi-Fi network.
4. Režim párování: If prompted, long-press any button on the switch for 5 seconds until the Wi-Fi LED indicator flashes (two short, one long flash) to enter pairing mode.
5. Kompletní nastavení: Once the device is detected and connected, follow the remaining steps in the app to name your switch and assign it to a room.

5. Návod k obsluze

The SONOFF TX Gen2 Smart Wall Touch Switch offers multiple ways to control your connected lights.

5.1 Manuální dotykové ovládání

Simply touch the capacitive button on the switch panel to toggle the connected light on or off. The LED indicator will change state to reflect the light's status.

Image: SONOFF TX Gen2 Smart Wall Touch Switch installed, demonstrating touch control.

5.2 Dálkové ovládání přes aplikaci eWeLink

Once paired, you can control your switch from anywhere using the eWeLink app:

• Ovládání zapnutí/vypnutí: Klepnutím na ikonu přepínače v aplikaci zapnete nebo vypnete světla.
• Plánování: Set timers and schedules for automatic on/off operations.
• Chytré scény: Create custom scenes to automate actions based on conditions (e.g., "Good Night" scene to turn off all lights).

Image: Illustration of multiple control methods including touch, remote control via smartphone, and voice control.

5.3 Hlasové ovládání

The switch is compatible with Apple Home, Google Home, and Amazon Alexa. Once integrated, you can use voice commands to control your lights.

• „Hej Siri, rozsviť světlo v obýváku.“
• "Ok Google, turn off the kitchen light."
• "Alexa, set the bedroom light to 50%." (Note: Dimming functionality depends on the connected bulb and system).

5.4 Independent Relay Mode

Activate this mode in the eWeLink app settings. When enabled, pressing the physical button on the switch will not cut power to the smart light, ensuring it remains online and controllable via app or voice commands, even if the physical switch is "off".

Image: Comparison showing traditional switch behavior versus Independent Relay Mode, highlighting continuous smart light control.

5.5 Nighttime LED Indicator

The built-in LED indicator helps locate the switch in the dark. You can adjust its brightness through the eWeLink app settings to suit your preference and avoid disturbance.

Image: Close-up of the SONOFF TX Gen2 switch showing the LED button indicator and its dimmable feature.

6. Údržba

Proper maintenance ensures the longevity and optimal performance of your smart switch.

• Čištění: Use a soft, dry cloth to clean the glass panel. Avoid abrasive cleaners or solvents that could damage the surface.
• Aktualizace firmwaru: Regularly check the eWeLink app for available firmware updates. Updates can improve performance, add new features, and enhance security. Follow the in-app instructions to perform updates.
• Podmínky prostředí: Ensure the switch operates within its specified temperature and humidity ranges to prevent damage.

7. Řešení problémů

If you encounter issues with your SONOFF TX Gen2 Smart Wall Touch Switch, refer to the following common problems and solutions:

8. Specifikace

Detailed technical specifications for the SONOFF TX Gen2 Smart Wall Touch Switch (1-Channel).

Image: Diagram showing the dimensions and key specifications of the SONOFF TX Gen2 switch.

9. Záruka a podpora

SONOFF provides comprehensive support for its products.

• Záruka: This product comes with a two-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
• Zákaznická podpora: For technical assistance, troubleshooting, or warranty inquiries, please contact SONOFF customer support at podpora@itead.cc.
• Online zdroje: Visit the official SONOFF store for additional product information, FAQs, and community support: SONOFF Amazon Store.