ID-COOLING FX240 PRO Liquid CPU Cooler Instruction Manual

1. Konec produktuview

The ID-COOLING FX240 PRO is a premium All-In-One (AIO) liquid CPU cooler designed for gaming and high-performance desktop computing systems. It features a 240mm radiator, two 120mm high-efficiency fans, and a special CD pattern pump header for effective heat dissipation.

Klíčové vlastnosti:

• Premium AIO Cooler: Designed for high-performance systems with a Thermal Design Power (TDP) of 300W.
• Výkonné čerpadlo: Operates at 2900RPM ±10% for efficient CPU heat dissipation.
• Extreme Cooling Fans: Two 120mm fans deliver stable performance with a maximum airflow of 82.5CFM and maximum air pressure of 2.55mmH2O.
• All-Black Layout: A sleek, all-black design integrates seamlessly into various PC builds.
• Jednoduchá správa kabelů: Fans feature daisy-chain connectors to reduce cable clutter.
• Premium Water Block Design: CD patterns on the water block enhance the aesthetic appeal.
• Široká kompatibilita: Supports Intel LGA1851/1700/1200/1151/1150/1155/1156 and AMD AM4/AM5 sockets.

Image: The ID-COOLING FX240 PRO Liquid CPU Cooler installed in a desktop PC, showcasing its all-black design and pump header.

2. Co je v krabici

Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty.

• 240mm Radiator with Integrated Pump
• 2 x 120 mm chladicí ventilátor
• Intel Mounting Hardware (Backplate, Brackets, Standoffs, Tightening Nuts)
• AMD Mounting Hardware (Bracket, Standoffs, Rubber Grommets, Mounting Nuts)
• Tepelné mazivo
• Prodlužovací kabel ventilátoru
• Uživatelská příručka

Image: All components included with the ID-COOLING FX240 PRO, laid out for inspection.

3. Specifikace

4. Nastavení a instalace

This section provides detailed instructions for installing your ID-COOLING FX240 PRO Liquid CPU Cooler. Please refer to the included video for a visual guide.

Obecné poznámky:

• Před instalací se ujistěte, že je systém vypnutý a odpojený od sítě.
• S komponenty zacházejte opatrně, abyste předešli jejich poškození.
• Refer to your motherboard manual for specific header locations if needed.

4.1. Intel Installation (LGA1851/1700/1200/115X)

1. Příprava zadní desky: Adjust the Intel backplate screws to the corresponding positions for your socket type (pull outward for LGA1851/1700, pull inward for LGA1200/115X). Insert the backplate through the back of the motherboard.
2. Mount Standoffs: Mount the appropriate Intel standoffs onto the existing posts on the backplate.
3. Příprava čerpadla: Peel off the protective sticker from the copper plate of the pump. Align the two registration marks on the pump bracket, press it firmly into place, and twist it clockwise to secure.
4. Naneste teplovodivou pastu: Clean the CPU surface thoroughly. Apply a thin, even layer of thermal grease to the CPU's Integrated Heat Spreader (IHS).
5. Install Pump Assembly: Carefully place the pump assembly over the four standoffs. Secure it with the four mounting nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

4.2. AMD Installation (AM4/AM5)

1. Remove Retention Frame: Remove the original AMD plastic retention frame from the motherboard, but keep the stock backplate.
2. Mount Standoffs: Mount the rubber grommets and AMD standoffs onto the existing posts on the stock backplate.
3. Příprava čerpadla: Peel off the protective sticker from the copper plate of the pump. Align the two registration marks on the pump bracket, press it firmly into place, and twist it clockwise to secure.
4. Naneste teplovodivou pastu: Clean the CPU surface thoroughly. Apply a thin, even layer of thermal grease to the CPU's Integrated Heat Spreader (IHS).
5. Install Pump Assembly: Carefully place the pump assembly over the four standoffs. Secure it with the four mounting nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

4.3. Připojení kabelů

1. Daisy-Chain Fans: Connect the fans to each other using their daisy-chain connectors. Connect the last fan in the chain to the provided fan extension cable.
2. Connect Fan Extension: Connect the fan extension cable to the "CPU_FAN" header on your motherboard.
3. Připojte čerpadlo: Connect the 3-pin cable from the radiator (pump) to the "PUMP_FAN" header on your motherboard.

Image: Daisy-chained fan connectors, illustrating simplified cable management.

5. Návod k obsluze

Once installed, the ID-COOLING FX240 PRO operates automatically to maintain optimal CPU temperatures. The pump and fans are controlled by your motherboard's fan headers, typically managed through the BIOS or dedicated software.

• Provoz čerpadla: The pump runs at a constant speed of 2900RPM ±10% to ensure continuous coolant circulation.
• Rychlost ventilátoru: The two 120mm fans adjust their speed based on CPU temperature, providing up to 82.5 CFM airflow and 2.55 mmH2O static pressure.
• Hladina hluku: Under typical operating conditions, the cooler maintains a noise level of approximately 35.2 dB(A).

Obrázek: Podrobný view of the V7 water pump, highlighting its 2900 RPM speed and 300W TDP capacity.

Image: Specifications of the 120mm cooling fans, including fan speed, max airflow, max static pressure, and noise level.

6. Údržba

Správná údržba zajišťuje dlouhou životnost a optimální výkon vašeho kapalinového chladiče CPU.

• Čištění prachu: Pravidelně čistěte žebra chladiče a lopatky ventilátoru stlačeným vzduchem, abyste odstranili nahromaděný prach. Prach může bránit proudění vzduchu a snižovat účinnost chlazení.
• Kontrola trubek: Regularly check the coolant tubes for any signs of kinks, leaks, or damage.
• Kontrola čerpadla: Listen for any unusual noises from the pump. A consistent humming sound is normal, but grinding or gurgling may indicate an issue.
• Teplovodní pasta: While not frequently required, if you ever remove the cooler, clean off old thermal paste and apply a fresh layer before reinstallation.

7. Řešení problémů

If you encounter issues with your ID-COOLING FX240 PRO, consider the following common troubleshooting steps:

• Vysoké teploty procesoru:
  • Ujistěte se, že je čerpadlo bezpečně namontováno a má dobrý kontakt s procesorem.
  • Zkontrolujte, zda byla teplovodivá pasta nanesena správně a rovnoměrně.
  • Check if fans are spinning and oriented correctly for optimal airflow (pushing air through the radiator).
  • Očistěte veškerý prach usazený na žebrech chladiče.
• Unusual Noises (Gurgling/Clicking):
  • Ujistěte se, že je chladič namontován výše než čerpadlo, aby se v čerpadle nehromadily vzduchové bubliny.
  • Gently tilt your PC case while running to help dislodge any trapped air bubbles.
  • If the noise persists and is loud, it may indicate a pump issue.
• Ventilátory se netočí:
  • Check all fan connections to ensure they are securely plugged into the motherboard headers.
  • Verify fan settings in your motherboard's BIOS/UEFI to ensure they are not set to 0 RPM at low temperatures.

If these steps do not resolve your issue, please contact ID-COOLING customer support for further assistance.

8. Záruka a podpora

ID-COOLING products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ID-COOLING webUschovejte si doklad o koupi pro případ reklamace.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ID-COOLING customer service through their official channels. You can often find support contact information on the product packaging or the manufacturer's webmísto.

Online zdroje:

• Navštivte ID-COOLING Store on Amazon pro informace o produktech a aktualizace.
• Check the official ID-COOLING website for the latest drivers, software, and support documentation.