SOOPYK Bottom Load Water Cooler Dispenser Ice Maker (Model BYCZ623) Instruction Manual

Zavedení

Thank you for choosing the SOOPYK Bottom Load Water Cooler Dispenser Ice Maker, Model BYCZ623. This appliance is designed to provide convenient access to cold and room temperature water, along with a built-in ice maker. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance.

Důležité bezpečnostní informace

• Tento spotřebič je určen pouze pro vnitřní použití.
• Ujistěte se, že je jednotka umístěna na rovném a stabilním povrchu.
• Leave adequate space (at least 4 inches) between the back of the unit and the wall for proper ventilation and cooling.
• Do not operate the unit if the power cord is damaged. Contact qualified service personnel for repair.
• Před čištěním nebo jakoukoli údržbou vždy odpojte přístroj ze zásuvky.
• This model provides COLD and ROOM TEMPERATURE water only. It DOES NOT have a hot water function.
• The built-in ice maker produces ice but does NOT keep it frozen. Ice should be used promptly or transferred to a freezer.
• Během provozu a údržby držte děti v dostatečné vzdálenosti od spotřebiče.

Vlastnosti produktu

• Cold and Room Temperature Water: Offers options for crisp cold water and ambient room-temperature water. Note: This model does not dispense hot water.
• Built-in Ice Maker: Produces bullet-shaped ice, with a daily capacity of up to 17 lbs and an internal storage capacity of 0.7 lbs. Ice is not kept frozen and should be used or stored elsewhere.
• Empty Bottle Alert: An indicator light notifies you when the water bottle needs replacement.
• Auto Shut-Off System: The machine automatically stops operation if the ice bin is full or if there is insufficient water in the bottle.
• Stainless Steel Tubing: The water intake tube is constructed from durable stainless steel.
• Bottom Load Design: Accommodates 3-gallon or 5-gallon water jugs in a convenient bottom compartment, eliminating the need for heavy lifting. (Water bottle not included)

Nastavení

1. Vybalení a umístění

1. Opatrně vyjměte vodní chladič z obalu.
2. Place the unit on a level, sturdy surface in a well-ventilated area. Ensure there is at least 4 inches of clearance from walls or other objects to allow for proper heat dissipation.
3. Vyčistěte vnější část jednotky měkkým, damp tkanina.

2. Installing the Water Bottle

1. Open the bottom compartment door of the water cooler.
2. Remove the cap from your 3-gallon or 5-gallon water bottle.
3. Insert the stainless steel probe (water pump tube) into the neck of the water bottle. Ensure it is securely in place.
4. Slide the water bottle into the bottom compartment.
5. Close the compartment door completely. The unit has a sensor that prevents operation if the door is not fully closed.

Figure 1: Inserting the water pump tube into the water bottle.

Figure 2: Water bottle placed in the bottom loading compartment.

3. Počáteční zapnutí

1. Zapojte napájecí kabel do uzemněné elektrické zásuvky.
2. Allow the unit to sit for at least 15-30 minutes before turning on any functions to allow the refrigerant to settle.
3. Press the 'Power' button on the control panel to turn on the unit.
4. Press the 'Water Cooling' button to activate the cold water function.
5. Press the 'Make Ice' button to activate the ice making function.

Návod k obsluze

Konec ovládacího paneluview

Figure 3: Control Panel with Indicator Lights and Buttons.

• Vypínač: Zapíná/vypíná jednotku.
• Ice Indicator: Lights up when ice making is active.
• Indikátor studené vody: Lights up when cold water function is active.
• Přidejte indikátor vody: Flashes when the water bottle is empty and needs replacement.
• Water Cooling Button: Activates/deactivates the cold water function.
• Make Ice Button: Activates/deactivates the ice making function.
• Ice Fill Button: Dispenses ice cubes.
• Water Fill Button: Dispenses cold or room temperature water.

Dávkování vody

1. Place a cup or glass under the water spout.
2. To dispense cold water, ensure the 'Water Cooling' function is active (indicator light on). Press the 'Water Fill' button.
3. To dispense room temperature water, ensure the 'Water Cooling' function is OFF. Press the 'Water Fill' button.

Making and Dispensing Ice

1. Ensure the water bottle is full and the unit is powered on.
2. Press the 'Make Ice' button to start the ice production cycle. The 'Ice' indicator light will illuminate.
3. Ice production takes approximately 6 minutes per cycle.
4. When ice is ready, place a cup or glass under the ice dispenser.
5. Press the 'Ice Fill' button to dispense ice cubes.
6. The unit will automatically stop making ice if the ice bin is full.

Údržba

1. Čištění odkapávací misky

1. Odkapávací miska je odnímatelná pro snadné čištění.
2. Pull the drip tray forward to remove it from the unit.
3. Empty any accumulated water and wash the tray with mild soap and warm water.
4. Před opětovným vložením důkladně opláchněte a osušte.

Obrázek 4: Vyjímatelná odkapávací miska pro snadné čištění.

2. Generální úklid

1. Odpojte jednotku ze zásuvky.
2. Vnější povrchy otřete měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
3. For internal cleaning, consult the full product manual or contact customer support.

Odstraňování problémů

Specifikace

• Značka: SOOPYK
• Číslo modelu: BYCZ623
• Barva: Černý
• Capacity (Ice): 17 Pounds Daily Capacity (0.7 lbs storage)
• Rozměry produktu: 114"D x 12.2"W x 40"H (Note: 114"D seems unusually large, likely a typo in source data. Actual depth is likely closer to 14.49" based on image.)
• Typ instalace: Volné stání
• Zdroj napájení: Elektrický kabel
• První k dispozici: 6. prosince 2025

Obrázek 5: Rozměry produktu.

Záruka a podpora

For warranty information, technical support, or any questions regarding your SOOPYK water cooler, please refer to the documentation included with your purchase or visit the official SOOPYK store online. You can also find additional information and contact options on the SOOPYK Brand Store.

Protection plans may be available for purchase separately. Please check with your retailer for details on extended warranty options.