ATOMSTACK A5 Pro Desktop Laser Engraver Instruction Manual

1. Úvod

The ATOMSTACK A5 Pro is a high-performance desktop laser engraver and cutting machine designed for precision work on various materials. Featuring a 5W ultra-fine compressed spot laser, it offers exceptional engraving accuracy and cutting capabilities. Its robust all-metal frame ensures stability and durability, making it suitable for a wide range of DIY craft projects.

2. Bezpečnostní informace

WARNING: This product contains a Class 4 laser. Direct exposure to the laser beam can cause severe eye damage and skin burns. Always follow safety precautions.

• Ochrana očí: Always wear the provided eye protection glasses when operating the laser engraver. The UV-filtering acrylic on the laser module blocks 97% of ultraviolet light, but additional eye protection is mandatory for direct observation.
• Větrání: Stroj používejte v dobře větraném prostoru, aby se rozptýlily výpary a kouř vznikající během gravírování a řezání.
• Požární bezpečnost: Mějte po ruce hasicí přístroj. Nenechávejte stroj během provozu bez dozoru, zejména při řezání hořlavých materiálů.
• Bezpečnost materiálu: Engrave or cut only approved materials. Avoid highly reflective, transparent, or unknown materials that may cause unexpected laser reflections or hazardous fumes.
• Děti a domácí mazlíčci: Udržujte děti a domácí zvířata mimo provozní oblast.
• Nouzové zastavení: Seznamte se s umístěním a funkcí tlačítka nouzového zastavení.

Figure 2.1: Key components of the ATOMSTACK A5 Pro, highlighting safety features like the emergency button and eye protection.

3. Obsah balení

Before assembly, verify that all components listed below are present in your package. If any parts are missing or damaged, contact customer support.

• Laser Engraver Frame (pre-assembled sections)
• Laserový modul (5W)
• Napájecí adaptér a kabel
• USB kabel
• Ochranné brýle
• Tools for Assembly (wrenches, hex keys)
• SampMateriály pro testování
• Uživatelská příručka (tento dokument)

Figure 3.1: All components included in the ATOMSTACK A5 Pro package.

4. Nastavení a montáž

The ATOMSTACK A5 Pro features a quick-installation design, allowing for assembly typically within 10-20 minutes. The all-metal structure and integrated screw rods contribute to its stability and ease of setup.

1. Rozbalte komponenty: Opatrně vyjměte všechny položky z obalu a zkontrolujte je podle seznamu obsahu balení.
2. Sestavte rám: Connect the pre-assembled aluminum alloy frame sections using the provided screws and tools. Ensure all connections are secure. The integrated screw rods for the X and Y axes simplify this process and enhance precision.
3. Instalace laserového modulu: Mount the laser module onto the designated carriage on the X-axis. Secure it firmly.
4. Připojit kabely: Connect the power cable to the laser engraver and a power outlet. Connect the USB cable from the engraver to your computer.
5. Počáteční zapnutí: Turn on the machine. The laser module has a fixed focus, eliminating the need for manual focal length adjustments.

Figure 4.1: The ATOMSTACK A5 Pro ready for operation.

5. Návod k obsluze

5.1 Kompatibilita softwaru

The ATOMSTACK A5 Pro is compatible with widely used engraving software:

• LaserGRBL: Free software, compatible with Windows XP/7/8/10/11.
• LightBurn: Paid software, compatible with Windows and Mac OS.

Podporováno file Mezi formáty patří NC, BMP, JPG, PNG a DXF.

Figure 5.1: Software compatibility with LaserGRBL and LightBurn.

5.2 Proces gravírování a řezání

1. Připravte si svůj návrh: Create or import your design into LaserGRBL or LightBurn.
2. Materiál místa: Position the material to be engraved or cut within the working area (410mm x 400mm). The machine features precision scale lines on the X and Y axes for accurate placement.
3. Connect and Configure: Connect the engraver to your computer via USB. Select the correct COM port and machine profile in your software.
4. Nastavit parametry: Adjust laser power, speed, and passes according to the material and desired effect. The A5 Pro's ultra-fine compressed spot (0.08mm) allows for precise detail.
5. Zahájení provozu: Spusťte proces gravírování nebo řezání ze softwaru. Během provozu stroj pečlivě sledujte.

Obrázek 5.2: Přample of engraving quality with the 5W ultra-fine compressed spot technology.

5.3 Kompatibilita materiálů

The ATOMSTACK A5 Pro can engrave and cut a wide range of materials:

• Rytina: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating and paint metal, 304 mirror stainless steel (requires black coating), ceramic (requires black coating), dark stone.
• Řezání: Cardboard, non-woven fabric, wood board (up to 5mm plywood), acrylic, thin plastic board, sponge.

Obrázek 5.3: Přamples of materials that can be processed by the A5 Pro.

6. Údržba

Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK A5 Pro.

• Čištění laserové čočky: Periodically inspect and gently clean the laser lens using a lint-free cloth and lens cleaning solution. Dust and debris can reduce laser efficiency.
• Keep the Machine Clean: Remove any debris, dust, or material residue from the machine's frame and moving parts after each use.
• Zkontrolujte připojení: Ensure all electrical and USB connections are secure and free from damage.
• Namažte pohyblivé části: If necessary, apply a small amount of appropriate lubricant to the guide rails to ensure smooth movement of the laser module.
• Chladicí ventilátor: The laser module includes a built-in cooling fan. Ensure it is free from obstructions to maintain proper cooling.

Figure 6.1: Built-in cooling fan for the laser module.

7. Řešení problémů

This section addresses common issues you might encounter with your ATOMSTACK A5 Pro.

• Laser nesvítí:
  • Check if the machine is powered on and connected to the computer.
  • Ujistěte se, že tlačítko nouzového zastavení není stisknuté.
  • Verify software settings for laser power and mode.
  • Check the laser module cable connection.
• Špatná kvalita gravírování/řezání:
  • Ensure the material is flat and properly positioned.
  • Adjust laser power and speed settings for the specific material.
  • Pokud se laserová čočka jeví znečištěná, očistěte ji.
  • Verify that the laser module is securely mounted.
• Stroj nereaguje:
  • Restartujte software a stroj.
  • Check the USB cable connection and try a different USB port.
  • Ensure the correct COM port is selected in your software.
• Neobvyklé zvuky:
  • Inspect the moving parts for any obstructions.
  • Check if the belts are properly tensioned and not worn.
  • Ensure the integrated screw rods are clean and moving smoothly.

If issues persist, refer to the official ATOMSTACK support resources or contact customer service.

8. Specifikace

9. Záruka a podpora

ATOMSTACK products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official ATOMSTACK webnebo se obraťte na prodejce. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.

For the latest drivers, software updates, and additional resources, visit the official ATOMSTACK support page.