1. Úvod
Thank you for choosing the Dessiz Commercial Ice Maker Machine, Model DZB-45. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your ice maker. Please read this manual thoroughly before initial use and retain it for future reference.
Figure 1: Dessiz Commercial Ice Maker Machine, Model DZB-45. This image shows the front view of the ice maker, featuring a black top section with a clear lid revealing ice cubes, a control panel, and a stainless steel lower section with ventilation grilles.
2. Bezpečnostní pokyny
To prevent injury to users or damage to the product, observe the following safety precautions:
- Ujistěte se, že výrobník ledu je umístěn na stabilním a rovném povrchu.
- Nepoužívejte spotřebič s poškozeným napájecím kabelem nebo zástrčkou.
- Udržujte ventilační otvory bez překážek.
- Neponořujte spotřebič, napájecí kabel ani zástrčku do vody ani jiných kapalin.
- Před čištěním nebo prováděním jakékoli údržby odpojte výrobník ledu ze zásuvky.
- Allow the unit to stand upright for at least 24 hours before initial use to allow refrigerants to settle.
- This appliance is designed for commercial and household use.
3. Konec produktuview a Komponenty
The Dessiz Commercial Ice Maker Machine is designed for efficient ice production with a large storage capacity. Key components include:
- Ovládací panel: For operating functions and settings.
- Zásobník ledu: Holds up to 15 lbs of ice.
- Přívod vody: Supports both tap water and bottled water connections.
- Vypouštěcí otvor: For water drainage during cleaning or defrosting.
- Nastavitelné nožičky: For leveling the unit.
Obrázek 2: Přesview of Dessiz Ice Maker components and dimensions. This image displays the ice maker with callouts for its dimensions (23.8"H x 15.74"W x 14.17"D) and a list of included accessories such as sewage pipe, connectors, buckles, water inlet pipes, ice shovel, and ice cube bags.
4. Nastavení a instalace
4.1 Vybalení
- Opatrně odstraňte veškerý obalový materiál.
- Inspect the ice maker for any shipping damage.
- Odstraňte z jednotky veškeré ochranné fólie nebo nálepky.
4.2 Umístění
- Výrobník ledu umístěte na pevný a rovný povrch.
- Ensure adequate ventilation around the unit. Maintain at least 5 inches of space from walls or other appliances.
- Vyhněte se přímému slunečnímu záření nebo zdrojům tepla.
- Nastavte vyrovnávací nožičky, abyste zajistili stabilitu.
4.3 Připojení vody
The Dessiz ice maker supports two water input methods:
- Direct Tap Water Supply: Connect the provided water inlet pipe to a potable water source and the designated inlet on the ice maker. Ensure all connections are secure to prevent leaks.
- Self-Priming Bottled Water: Use the self-priming water pipe to draw water from a gallon-sized bottled water container.
Figure 3: Illustration of the two water input methods. This image shows diagrams for connecting an external tap water supply with a filter and using a self-priming pump for bottled water, highlighting the tap water inlet and self-absorbing water inlet ports on the back of the machine.
4.4 Počáteční čištění
Before first use, it is recommended to clean the ice maker. Refer to the 'Maintenance' section for detailed cleaning instructions.
5. Návod k obsluze
5.1 Ovládací panel Overview
The ice maker features an intuitive LED control panel for easy operation.
Obrázek 4: Detailní view of the LCD control panel. This image highlights the various buttons and indicators on the panel, including Power, Ice Making Mode (S-ice, M-ice, L-ice), Water Intake Mode (Tap-water, Bottled water), Reservation, Clean, Ice Full, Add Water, Timeout, and HT-protection.
5.2 Zapnutí/vypnutí
- To turn on the ice maker, press the Moc tlačítko.
- Chcete-li výrobník ledu vypnout, stiskněte tlačítko Moc znovu tlačítko.
5.3 Režimy výroby ledu
Select your desired ice cube thickness:
- S-ice (Small): Produces thinner ice cubes in approximately 8-10 minutes.
- M-ice (Medium): Produces medium-sized ice cubes in approximately 10-12 minutes.
- L-ice (Large): Produces thicker ice cubes in approximately 12-15 minutes.
The machine produces 45 ice cubes per cycle and up to 100 lbs of ice in 24 hours.
Figure 5: Visual representation of adjustable ice cube thickness. This image shows three ice cube sizes (S, M, L) with corresponding ice making times (8-10 mins, 10-12 mins, 12-15 mins) and examples of drinks suitable for each size.
5.4 Funkce rezervace
The reservation function allows you to schedule ice production up to 24 hours in advance.
- Stiskněte tlačítko Rezervace tlačítko.
- Použijte Up a Dolů arrows to set the desired time for ice production to begin.
- Confirm the setting. The machine will start making ice at the scheduled time.
Figure 6: Illustration of the 24-hour reservation feature. This image depicts a timeline from night closure to getting full ice, indicating the ability to set a timer for ice production.
6. Údržba
6.1 Automatické samočištění
The ice maker is equipped with an automatic self-cleaning function:
- Ujistěte se, že je připojen přívod vody.
- Stiskněte a podržte Čistý button for more than 5 seconds to initiate the automatic cleaning cycle.
- You can adjust the cleaning duration in 5-minute increments using the Up a Dolů tlačítka.
Figure 7: Visual guide for activating the automatic cleaning function. This image shows the control panel with the 'Clean' button highlighted and instructions to press it for more than 5 seconds to start the cycle, along with options to adjust duration.
6.2 Pravidelné čištění
For optimal performance and hygiene, regular manual cleaning is recommended:
- Odpojte výrobník ledu ze zásuvky.
- Clean the inner wall of the sink and ice storage bin with a neutral cleaner.
- Důkladně opláchněte čistou vodou.
- Vnější povrch otřete měkkým, damp tkanina.
- Clean the water lines and drain periodically to prevent mineral buildup.
6.3 Odmrazování
If ice accumulates excessively, the defrost function can be activated via the control panel. Ensure the drain is properly connected to allow melted water to escape.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce:
| Problém | Možná příčina | Řešení | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ice production is slow or insufficient. | Insufficient water supply; high ambient temperature; dirty condenser. | Check water connection; ensure proper ventilation; clean condenser. | ||||||||
| Kostky ledu jsou příliš tenké nebo příliš silné. | Incorrect ice making mode selected. | Adjust ice cube thickness setting (S-ice, M-ice, L-ice) on the control panel. | ||||||||
| Ice gets stuck in the tray. | Water quality issues; machine needs defrosting or cleaning. | Perform a self-cleaning cycle; use filtered water; manually clean the ice tray. | ||||||||
Související dokumenty - DZB-45
|
