1. Úvod
This manual provides instructions for the safe and effective operation of the OWON ADS824A Digital Oscilloscope. The ADS824A is a 200MHz, 4-channel, 12-bit digital oscilloscope designed for high-precision testing. It features a 1.25GSa/s real-time sampling rate and a 50M storage depth, making it suitable for signal integrity verification, circuit fault identification, digital circuit design, debugging, and automotive electronics testing. This device integrates an oscilloscope, frequency counter, voltmeter, and FFT spectrum analyzer into a single unit.
2. Konec produktuview
2.1 Klíčové vlastnosti
- 200MHz bandwidth with four analog channels.
- 1.25GSa/s real-time sampling rate and 50M storage depth.
- Up to 700,000wfms/s waveform refresh rate.
- 12-bit vertical resolution (4096 levels) for capturing microvolt-level signal fluctuations.
- Integrated functions: oscilloscope, frequency counter, voltmeter, and FFT spectrum analyzer.
- Supports 43 automatic measurements with advanced math functions and a built-in glossary.
- 7-inch multi-touch TFT-LCD display.
- Communication interfaces: HDMI, USB device, USB Host, Trig Out(P/F), LAN.
- Supports various triggering modes including edge, video, pulse width, slope, Nth edge, and logic.
- Includes 2-channel hardware decoding for RS-232/UART, I2C, SPI, CAN, and LIN protocols.
2.2 Co je v krabici
The OWON ADS824A package typically includes:
- OWON ADS824A Digital Oscilloscope Unit
- Napájecí adaptér
- Uživatelská příručka
- USB kabel
2.3 Fyzický overview
Obrázek 2.3.1: Přední strana view of the OWON ADS824A Digital Oscilloscope, showing the display and control panel.
Figure 2.3.2: Front panel highlighting key specifications such as 4 channels, 1.25GSa/s, 200MHz bandwidth, and 700,000 wfms/s refresh rate.
Obrázek 2.3.3: Detail view of the control knobs for horizontal and vertical adjustments.
Figure 2.3.4: Rear panel showing the LAN, USB Device, HDMI, and USB-C Power interfaces.
Obrázek 2.3.5: Horní a zadní část view illustrating the overall dimensions and port layout.
3. Nastavení
3.1 Připojení napájení
- Connect the provided power adapter to the USB-C Power interface on the rear panel of the oscilloscope.
- Zapojte napájecí adaptér do vhodné zásuvky střídavého proudu.
- Stisknutím tlačítka napájení na předním panelu zařízení zapnete.
3.2 Připojení sondy
- Connect the BNC connector of the oscilloscope probe to one of the four input channels (CH1-CH4) on the front panel.
- Ensure the probe's ground clip is securely connected to the ground reference of the circuit under test.
- Attach the probe tip to the test point on the circuit.
4. Návod k obsluze
4.1 Základní obsluha
The ADS824A features a 7-inch multi-touch display for intuitive control.
Figure 4.1.1: The 7-inch multi-touch TFT-LCD display allows for direct interaction with the waveform and menu settings.
- Zapnutí/vypnutí: Stiskněte tlačítko napájení na předním panelu.
- Navigace: Use the multi-touch screen or the physical control knobs to navigate menus and adjust settings.
- Autoset: Press the 'Autoset' button to automatically adjust horizontal and vertical settings for optimal waveform display.
4.2 Waveform Display and Control
- Horizontální ovládací prvky: Adjust the time base (s/div) and horizontal position using the dedicated knobs.
- Vertikální ovládací prvky: Upravte objemtage scale (V/div) and vertical position for each channel using their respective knobs.
- Lupa: The device supports zoom windows for detailed waveform analysis.
Figure 4.2.1: Illustration of the waveform capture rate, showing the ability to display complex signals effectively.
4.3 Měřicí funkce
The ADS824A offers extensive measurement capabilities:
- Auto Measurements: Access 43 automatic measurement functions. A built-in glossary assists in understanding technical terms for quick setup.
- Parametric Statistics: Supports measurement indicators and cursor gating for detailed analysis.
- Cursor Gating: Utilize visual indicators and zoom windows for precise cursor measurements in FFT and XY modes.
Figure 4.3.1: Display showing the interface for 43 auto measurements and the technical terms glossary.
Obrázek 4.3.2: Obrazovka views demonstrating parametric statistics and cursor gating with visual indicators.
4.4 Spouštění
The oscilloscope supports various triggering options to capture specific events:
- Typy spouštěčů: Edge, Video, Pulse Width, Slope, Nth Edge, Logic, Under-amplitude, Over-amplitude, and Timeout.
- Nastavení: Access trigger settings via the dedicated 'Trigger' button or on-screen menu.
Figure 4.4.1: Interface showing advanced triggering options and hardware decoding capabilities.
4.5 Pokročilé funkce
- FFT Spectrum Analyzer: Perform 1M-point FFT analysis for accurate frequency component display.
- Digital Voltmeter (DVM): Integrated 4-digit voltmeter for ACrms, DC, and AC+DCrms measurements.
- Frekvenční čítač: Integrated 6-digit digital frequency counter.
- Protocol Decoding: Supports 2-channel hardware decoding for common serial protocols including RS-232/UART, I2C, SPI, CAN, and LIN.
- Vysoké rozlišení: The 12-bit vertical resolution (4096 levels) allows for capturing minute signal fluctuations, crucial for power ripple and noise analysis.
Figure 4.5.1: Display illustrating the FFT spectrum analysis and 256-level grayscale display features.
Obrázek 4.5.2: Obrazovka views demonstrating 50Mpts storage depth settings, 4-digit voltmeter, and 6-digit frequency counter.
Figure 4.5.3: Comparison illustrating the enhanced detail provided by the 12-bit high-resolution display compared to a standard oscilloscope.
4.6 Připojení externích zařízení
The ADS824A supports various external devices:
- Hostitel USB: Connect a mouse or keyboard for enhanced control and efficiency.
- Zařízení USB: Connect to a computer for data transfer or remote control.
- LAN: For wired network connections and Web Funkce ovládání.
- HDMI: Connect to an external display for extended or mirrored viewIng.
5. Údržba
5.1 Čištění
Pro zachování výkonu a vzhledu zařízení:
- Vnější povrch otřete měkkým, damp tkanina.
- Avoid using abrasive cleaners or solvents that may damage the casing nebo obrazovka.
- Ensure no liquids enter the device openings.
5.2 Skladování
When not in use, store the oscilloscope in a clean, dry environment away from direct sunlight and extreme temperatures.
5.3 Péče o baterii
The ADS824A includes a built-in lithium battery for portability. Proper battery care ensures longevity:
- Před prvním použitím baterii plně nabijte.
- Vyhněte se častému úplnému vybíjení baterie.
- If storing for extended periods, charge the battery to approximately 50% and recharge every few months.
- The built-in battery helps avoid issues caused by ground loops, providing a safe floating ground for measurements.
Figure 5.3.1: Information regarding the built-in lithium battery, emphasizing portability and ground loop avoidance.
6. Řešení problémů
This section addresses common issues you might encounter with the OWON ADS824A oscilloscope.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádná síla | Power adapter not connected or faulty; battery discharged. | Check power connections. Ensure adapter is working. Charge the battery. |
| Nezobrazuje se žádný průběh | Probe not connected; signal too small/large; incorrect trigger settings. | Verify probe connection. Adjust vertical scale (V/div). Press 'Autoset'. Check trigger level and mode. |
| Nestabilní průběh | Incorrect trigger level or mode; noisy signal. | Adjust trigger level. Change trigger mode. Use averaging acquisition mode. |
| Obrazovka nereaguje | Dočasná softwarová závada. | Restartujte zařízení. Pokud problém přetrvává, kontaktujte podporu. |
7. Specifikace
Detailed technical specifications for the OWON ADS824A Digital Oscilloscope.
Figure 7.1.1: Table detailing key oscilloscope specifications including bandwidth, sampling rate, and vertical resolution.
| Parametr | Hodnota |
|---|---|
| Šířka pásma | 200 MHz |
| Kanály | 4 |
| Sampsazba ling | 1.25 GSa/s (Real-time) |
| Max. Waveform Capture Rate | 700,000 XNUMX wfms/s |
| Max Memory Depth | 50 Mpt |
| Vertikální rozlišení | 12 bitů |
| Rozsah vertikální citlivosti | 500 uV/div - 10 V/div |
| Vstupní impedance | 1 MΩ±2%, parallel with 20 pF±5 pF |
| Rozsah časové základny | 1 ns/dílek - 1000 s/dílek |
| Přesnost časové základny | ±(0.01% + 0.1tdv) |
| Bus Decoding | RS232/UART, I2C, SPI, CAN, LIN |
| Vstupní spojka | DC, AC, Ground |
| Rozměry produktu | 10.25 x 3.07 x 6.3 palce |
| Hmotnost položky | 3.3 libry |
8. Záruka a podpora
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official OWON webwebu. Kontaktní údaje zákaznického servisu jsou obvykle k dispozici na stránce podpory výrobce.
