Návod k obsluze dětské elektrické koloběžky Gyroor KS2 s LED světly

1. Úvod a konecview

This manual provides essential information for the safe and efficient operation of your Gyroor KS2 Kids Electric Scooter. Please read it thoroughly before first use and retain it for future reference. The Gyroor KS2 is designed for children aged 6-12, featuring a safe maximum speed, adjustable handlebar, and vibrant LED lights for an engaging riding experience.

Image 1: The Gyroor KS2 Kids Electric Scooter, showcasing its sleek design and LED lighting capabilities.

2. Bezpečnostní informace

Your safety and the safety of others are paramount. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when operating the scooter. Adult supervision is recommended, especially for younger riders.

• Certifikace UL2272: The scooter is UL2272 certified, ensuring compliance with electrical safety standards.
• Bezpečná rychlost: The maximum speed is limited to 5 MPH, suitable for young riders.
• Inteligentní start: The motor engages only after the scooter reaches 2 MPH, preventing accidental acceleration.
• Zadní blatníková brzda: Provides intuitive and reliable stopping power.
• Wide Tires & Low Deck: Designed for enhanced stability and balance.

Image 2: Children enjoying their Gyroor KS2 scooters, highlighting the importance of safety gear.

3. Obsah balení

Po vybalení zkontrolujte, zda jsou přítomny všechny komponenty:

• Gyroor KS2 Electric Scooter (x1)
• Návod k použití (x1)
• Nabíječka (x1)
• Assembly Tools (Allen wrenches)

4. Montáž

The Gyroor KS2 scooter requires minimal assembly. Follow these steps to prepare your scooter for use:

1. Rozložte koloběžku: Gently push down on the folding lever located near the base of the handlebar stem to release the folded position. Raise the handlebar stem until it locks into place.
2. Připevněte řídítka: Insert the handlebar into the top of the stem. Align the holes and secure it using the provided screw and Allen wrench. Ensure it is tightened firmly.
3. Nastavení výšky řídítek: Uvolněte rychloupínací třamp on the handlebar stem. Press the small button on the stem and slide the handlebar to one of the two available height settings (29.5" or 33.5"). Release the button to lock it in place and re-tighten the quick-release clamp.
4. Deploy Kickstand: Locate the kickstand on the side of the deck and push it down to support the scooter.

Image 3: The adjustable handlebar feature, allowing the scooter to grow with your child.

5. Návod k obsluze

Před jízdou se seznamte s ovládáním koloběžky.

5.1 Zapnutí/vypnutí

• Zapnutí: Press and hold the power button on the handlebar display for approximately 3 seconds until the display illuminates.
• Vypnutí: Stiskněte a podržte tlačítko napájení přibližně 3 sekundy, dokud se displej nevypne.

5.2 rychlostní režimy

The scooter features different speed modes, indicated on the LED display:

• Gear E (Economy): Maximum speed of 5 MPH.
• Gear N (Normal): Maximum speed of 8 MPH.
• Gear S (Sport): Maximum speed of 10 MPH.

To switch between speed modes, briefly press the power button while the scooter is on.

5.3 Foot Sensor Start

The Gyroor KS2 uses a smart foot sensor start. To engage the motor, place one foot on the deck and push off with the other foot to reach a speed of at least 2 MPH. The motor will then activate, maintaining a constant speed based on the selected gear.

Image 4: Illustration of the foot sensor start mechanism on the scooter's deck.

5.4 Brzdění

To stop the scooter, simply step down on the rear fender brake with your foot. The LED lights on the side of the deck will illuminate red to indicate braking, enhancing visibility.

Image 5: Close-up of the rear fender brake and the illuminated LED lights during braking.

5.5 LED světel

The scooter features integrated LED lights on the deck and wheels. To turn the lights on or off, press and hold the light button located on the handlebar display.

6. Nabíjení

Ensure the scooter is fully charged before each use for optimal performance.

• Nabíjecí port: The charging port is located on the right side of the scooter's deck, covered by a protective cap.
• Proces nabíjení: Open the protective cap and insert the charger cable. Plug the charger into a standard wall outlet. The indicator light on the charger will typically show red during charging and turn green when fully charged.
• Doba nabíjení: Plné nabití z vybité baterie trvá přibližně 2 hodiny.
• Indikátor baterie: The handlebar LED display shows the current battery level with four bars.

Image 6: Location of the charging port and how to connect the charger.

7. Údržba

Regular maintenance helps prolong the life of your scooter.

• Čištění: Otřete skútr reklamouamp tkanina. Vyhněte se používání agresivních chemikálií nebo nadměrného množství vody.
• Kontrola pneumatik: Pravidelně kontrolujte opotřebení pneumatik. Ujistěte se, že nejsou propíchnuté nebo poškozené.
• Kontrola upevňovacích prvků: Regularly inspect all screws and fasteners to ensure they are tight.
• Skladování: Skladujte koloběžku na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

8. Řešení problémů

Pokud narazíte na nějaké problémy, podívejte se na následující běžné tipy pro řešení problémů:

• Koloběžka se nezapíná: Ujistěte se, že je baterie nabitá. Stiskněte a podržte tlačítko napájení po dobu 3 sekund.
• Motor se nezapíná: Confirm the scooter is powered on and you have pushed off to at least 2 MPH to activate the foot sensor start.
• Světla nefungují: Check if the lights are turned on by pressing and holding the light button. Ensure the battery has sufficient charge.
• Snížený výkon: This may indicate a low battery. Charge the scooter fully.

V případě přetrvávajících problémů se prosím obraťte na zákaznickou podporu Gyroor.

9. Specifikace

10. Záruka a podpora

The Gyroor KS2 Electric Scooter comes with a 1letá záruka na díly a a Záruka na baterii 6 měsíců. For warranty claims, technical support, or any questions not covered in this manual, please contact Gyroor customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (KS2) ready when contacting support.