Procolored K13-Lite DTF Printer 13" A3 - Návod k obsluze tiskového stroje na oděvní transfer

1. Úvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Procolored K13-Lite DTF Printer. Designed for high-quality apparel transfer printing, this machine incorporates advanced features to ensure efficient and vibrant results. Please read this manual thoroughly before operating the printer to ensure safe and optimal performance.

Figure 1: Procolored K13-Lite DTF Printer and included accessories.

Figure 2: Versatile garment printing capabilities of the K13-Lite.

2. Bezpečnostní informace

Always follow basic safety precautions to reduce the risk of fire, electric shock, or injury. Keep the printer away from water and heat sources. Ensure proper ventilation during operation, especially when using the curing oven. Do not attempt to service the printer yourself; refer to qualified service personnel. Always wear appropriate personal protective equipment, such as gloves, when handling inks and powders.

3. Obsah balení

Po vybalení zkontrolujte, zda jsou všechny položky přítomny:

• Procolored K13-Lite DTF Printer
• Initial Ink Set (CMYK + White pigment-based ink)
• Adhesive Powder
• PET Roll Film
• Printhead Moisturizing Device
• Nozzle Protection Fluid
• USB kabel
• Softwarová jednotka USB
• Napájecí kabel
• Návod k použití

4. Nastavení

Follow these steps to set up your Procolored K13-Lite DTF Printer:

1. Vybalení a úvodní kontrola: Carefully remove the printer and all accessories from the packaging. Inspect for any visible damage.
2. Příprava tiskárny:
   • Open the printer cover and remove any plastic zip ties or fixed buckles securing internal components.
   • Install the film roller rod and black knob, ensuring the film is positioned correctly close to the printhead side to prevent incomplete patterns.
   • Install the tray by loosening the two front screws, inserting the tray, and then tightening the screws to secure it.
3. Instalace softwaru:
   • Připojte tiskárnu k počítači přes USB.
   • Install the printer driver and RIP software from the provided USB drive.
4. Náplň inkoustu:
   • Shake ink bottles vigorously before adding to reduce sediment.
   • Add ink to the corresponding ink bottles in the printer's ink tank.
   • Slightly move the ink cartridges forth and back to pull them out in sequence. Use the provided syringe to draw 3-5ml of ink from each cartridge to prime the system.
5. Initial Test Print:
   • Execute the printhead cleaning function in the RIP software.
   • Print a test page to check the printhead nozzle status. Ensure all lines are complete and clear.

5. Návod k obsluze

Operating the Procolored K13-Lite involves preparing your design, printing, and then curing the transfer.

5.1 Design and Printing

1. Příprava návrhu: Use the Professional RIP software to prepare your design. The software automatically detects image formats and distinguishes between RGB and CMYK color modes. Pre-calibrated curves ensure consistent, vibrant colors.
2. Načítání filmu: Ensure the PET film is correctly loaded into the printer. The printer supports a maximum print width of 13 inches and a print length of 31 inches.
3. Proces tisku: The printer applies a mirrored color layer onto the PET film, followed by a white ink layer to enhance color richness and vibrancy.

Figure 3: Professional RIP software interface for design preparation and printing.

Obrázek 4: Přample of a printed design on film, showcasing accurate color reproduction.

5.2 Curing and Transfer (with DTF Oven)

After printing, the transfer requires curing with an oven and then pressing onto the garment.

1. Oven Setup:
   • Ensure the oven's voltage switch (220V/110V) is set correctly for your region.
   • Zapojte napájení a zapněte vypínač.
   • Set the desired temperature and time using the control panel. The oven defaults to 120°C for 150 seconds.
2. Applying Adhesive Powder: Sprinkle a layer of adhesive powder evenly on the back of the printed film.
3. Vytvrzování: Place the powdered film into the oven. The countdown starts automatically. After curing, remove the pattern.
4. Heat Press Transfer: Use a heat press to transfer the cured design onto your apparel.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vaší tiskárny.

• Automated Cleaning System: The printer features a scheduled cleaning cycle every 10 hours when powered on, reducing white ink clogging by up to 85%.
• White Ink Circulation: White ink circulates every 30 minutes to prevent sedimentation and extend printhead life up to 5 times.
• Infrared SafeGuard System: This system detects debris as small as 2 mm, preventing 90% of common failures for a longer lifespan.
• Filter Cotton Replacement: The oven's filter cotton should be replaced every three months.

Figure 5: Automated Cleaning System in action, reducing clogging.

Figure 6: White Ink Circulation System for consistent ink flow.

Figure 7: Infrared SafeGuard System for enhanced printhead protection.

7. Řešení problémů

Tato část obsahuje řešení běžných problémů. V případě složitějších problémů kontaktujte zákaznickou podporu.

• Printhead Clogging: Ensure regular automated cleaning cycles are active. Perform manual cleaning if necessary. The white ink circulation system helps prevent this.
• Inconsistent Colors: Verify that G7 Certified Color Accuracy settings are applied in the RIP software. Ensure proper color profiles jsou vybrány.
• Film Warping/Debris: The Infrared SafeGuard System should detect and prevent issues. Ensure the printing environment is clean and free of dust.
• Tiskárna nereaguje: Check USB connection and power supply. Restart the printer and computer.

8. Specifikace

9. Záruka a podpora

The Procolored K13-Lite DTF Printer comes with an extended 12-month standard warranty. During this period, you are eligible for 2 free printhead replacements if your printhead suffers any damage. A one-year warranty is provided for other accessories. Our dedicated customer service team is available 24/6 to address any queries or technical issues.

For technical assistance or warranty claims, please contact Procolored customer support.