Evenflo Tribute LX Convertible Car Seat Instruction Manual

1. Úvod

The Evenflo Tribute LX Convertible Car Seat is designed to provide safety and comfort for your child from infancy through toddlerhood. This manual provides essential information for proper installation, use, and maintenance of your car seat. Please read all instructions carefully before using the product.

This car seat is suitable for children weighing 5 to 40 lb and measuring 19 to 40 inches tall, transitioning from rear-facing to forward-facing modes.

2. Bezpečnostní informace

Your child's safety is paramount. The Evenflo Tribute LX Convertible Car Seat meets or exceeds all applicable Federal Safety Standards. In addition to federally required testing, it undergoes structural integrity, rollover, and temperature testing.

Důležité bezpečnostní pokyny:

• Always secure your child in the car seat using the 5-point harness system.
• Ensure the car seat is correctly installed in your vehicle according to the instructions for either rear-facing or forward-facing mode.
• Nikdy nenechávejte své dítě v autosedačce bez dozoru.
• Zaregistrujte si autosedačku a dostávejte důležité bezpečnostní aktualizace a informace o svolávacích akcích.

3. Konec produktuview

The Evenflo Tribute LX Convertible Car Seat features a compact and lightweight design, making it suitable for smaller vehicles and travel. Key components include:

• 5bodový systém pásů: For secure child restraint.
• 4-Position Shoulder Harness: Adjustable to accommodate your growing child.
• Up-Front Harness Adjust: For easy tightening and loosening of the harness.
• Plush Head Pillow: Provides comfort and proper head positioning for infants (removable).
• Removable Cup Holder: Dishwasher-safe for convenience.
• LATCH System Compatibility: For secure installation in vehicles equipped with LATCH anchors.

Obrázek 1: Přední strana view of the Evenflo Tribute LX Convertible Car Seat, highlighting the harness and head pillow.

4. Nastavení a instalace

4.1 Rear-Facing Installation (5-40 lb, 19-40 in.)

For rear-facing installation, ensure the car seat is positioned in the back seat of your vehicle. The child's head must be at least 1 inch below the top of the car seat shell.

1. Place the car seat in the rear-facing position on your vehicle's back seat.
2. Route the vehicle's seat belt or LATCH strap through the designated rear-facing belt path.
3. Tighten the seat belt or LATCH strap securely. The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.
4. Verify the recline angle is appropriate for your child's age and weight, typically indicated by a level line on the car seat.

Figure 2: A child secured in the Evenflo Tribute LX car seat in a rear-facing position.

4.2 Forward-Facing Installation (30-40 lb, 35-40 in.)

For forward-facing installation, the child must meet the minimum weight and height requirements. The top of the child's ears must be below the top of the car seat shell.

1. Place the car seat in the forward-facing position on your vehicle's back seat.
2. Route the vehicle's seat belt or LATCH strap through the designated forward-facing belt path.
3. Připevněte horní popruh k úchytu vozidla a utáhněte jej.
4. Tighten the seat belt or LATCH strap securely. The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.

Figure 3: A child secured in the Evenflo Tribute LX car seat in a forward-facing position.

5. Návod k obsluze

5.1 Zabezpečení vašeho dítěte

1. Usaďte dítě do autosedačky zády opřenými o opěradlo sedadla.
2. Přetáhněte popruhy bezpečnostního pásu přes ramena dítěte a mezi jeho nohy.
3. Buckle the chest clip at armpit level.
4. Insert the two buckle tongues into the buckle until they click.
5. Pull the up-front harness adjust strap to tighten the harness until it is snug against your child's body. You should not be able to pinch any excess webbingání na rameni dítěte.

6. Údržba

Regular cleaning and maintenance will ensure the longevity and hygiene of your Evenflo Tribute LX Convertible Car Seat.

• Fabric Pads: The durable, stain-resistant polyester fabrics are removable and machine washable. Refer to the care label for specific washing instructions.
• Popruhy postroje: Otřete popruhy bezpečnostního pásu reklamouamp látku. Neperte v pračce ani neponořujte popruhy do vody, mohlo by dojít k jejich oslabení.
• Přezka: Clean the buckle by rinsing with warm water. Do not use soaps or detergents.
• Shell and Plastic Parts: Wipe clean with mild soap and water.
• Držák poháru: The removable cup holder is dishwasher-safe for easy cleaning.

7. Řešení problémů

If you encounter issues with your car seat, please refer to the following common solutions or contact customer support.

• Příliš volný postroj: Ensure the harness straps are routed correctly and pull the up-front adjust strap firmly until snug.
• Car seat moves excessively: Re-install the car seat, ensuring the vehicle's seat belt or LATCH strap is tightened securely. The car seat should not move more than 1 inch at the belt path.
• Buckle sticking: Rinse the buckle with warm water to remove any debris. Do not use lubricants.

For further assistance, the Evenflo ParentLink® Consumer Care Team offers live video support with certified car seat safety technicians to assist with proper vehicle installation.

8. Specifikace

Figure 4: Dimensions of the Evenflo Tribute LX Convertible Car Seat.

9. Záruka a podpora

Evenflo is committed to providing safe and reliable products. For specific warranty information, please refer to the documentation included with your product or visit the official Evenflo webmísto.

Zákaznická podpora:

If you need help installing your car seat or have any questions, the Evenflo ParentLink® Consumer Care Team offers real-time online support. You can get live video support with a certified car seat safety technician to assist with proper vehicle installation, ensuring you can drive with confidence.

Navštivte Evenflo Store pro více informací a produktů.