1. Úvod
This manual provides essential information for the safe and efficient operation of your Anern 60A PWM Solar Charge Controller. This device is designed to manage power flow from your solar panels to your battery bank, ensuring optimal charging and protection. Please read this manual thoroughly before installation and use.
Obrázek 1.1: Přední strana view of the Anern 60A PWM Solar Charge Controller.
2. Bezpečnostní informace
- Ensure all connections are correct and secure before operation. Incorrect wiring can damage the controller and connected devices.
- Always connect the battery to the charge controller FIRST, then the solar panel, and finally the load. When disconnecting, reverse this order: disconnect the solar panel, then the load, then the battery.
- This controller is designed for 12V/24V lead-acid batteries (OPEN, AGM, GEL). It is NOT suitable for Ni-MH, Lithium, or other battery types unless explicitly stated in the settings.
- Regulátor instalujte v dobře větraném prostoru, mimo dosah hořlavých materiálů a vlhkosti.
- Avoid short circuits. Ensure all wires are properly insulated and terminals are tightened.
- Nepokoušejte se rozebírat ani opravovat ovladač sami. Pro servis kontaktujte kvalifikovaný personál.
3. Vlastnosti produktu
- 60A PWM Controller: Full 3-stage PWM management (direct charge, boost charge, float charge) for enhanced system efficiency and extended battery life.
- Vícenásobná ochrana: Built-in overcurrent/overload, open circuit, and reverse polarity protection. All protections are self-recovering.
- Functional LCD Display: Clear display shows status and data, allowing mode switching and parameter configuration.
- Kompatibilita baterie: Suitable for 12V/24V lead-acid batteries (OPEN, AGM, GEL).
- Duální USB porty: Two 5V/2A USB ports for charging mobile phones and other 5V devices.
- Automatická identifikace: Automatically recognizes 12V or 24V system voltage.
Image 3.1: Visual representation of the multiple security features including overvoltage, overcurrent, high temperature, time control, automatic identification, and connection reversal protection.
4. Obsah balení
Po otevření balíku zkontrolujte, zda jsou všechny položky přítomny a nepoškozené:
- Anern 60A PWM Solar Charge Controller
- Uživatelská příručka (tento dokument)
5. Nastavení a instalace
Follow these steps carefully to ensure proper and safe installation of your solar charge controller.
5.1. Connection Order
- Připojte baterii: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -).
- Připojte solární panel: Connect the solar panel to the charge controller. Ensure correct polarity.
- Připojení zátěže: Connect your DC load (e.g., lights, 5V USB devices) to the charge controller. Ensure correct polarity.
WARNING: Always follow the connection order (Battery > Solar Panel > Load) and disconnection order (Solar Panel > Load > Battery) to prevent damage to the controller.
5.2. Schéma zapojení
Image 5.1: Diagram illustrating the correct connection sequence for the battery, solar panels, and optional AC load/inverter.
5.3. Tipy pro instalaci
- Use appropriate wire gauges for your system's current. The controller supports up to 12-gauge wires.
- Ensure all wire connections are tight and secure using a small screwdriver.
- Insulate any bare wire ends with electrical tape to prevent accidental shorts.
5.4. Instalační videonávod
Video 5.1: A seller-provided video demonstrating the installation process of a solar charge controller, including wiring connections.
Video 5.2: A seller-provided video illustrating the connection method for a solar charge controller, emphasizing the correct sequence.
6. Návod k obsluze
The Anern 60A PWM Solar Charge Controller features an intuitive LCD display and three buttons for easy operation.
6.1. LCD displej nadview
Obrázek 6.1: Detailní view of the LCD display area, voltage symbol, HR, panels, five-battery level indicator, load identification, charging logo, and output identification. Also shows the MENU, UP, and DOWN/HM buttons.
- Oblast digitálního displeje: Shows various parameters like voltage, current, and settings.
- svtage Symbol: Označuje svtage čtení.
- HR: Timer setting for load control.
- Panely: Indicates solar panel activity.
- Five Battery Level Indicator: Zobrazuje aktuální úroveň nabití baterie.
- Load Identification: Indicates if a load is connected and active.
- Charging Logo: Continuous lighting for direct charging/charging, slow flashing for floating loading.
- Output Identification: Indicates load output status.
6.2. Funkce tlačítek
- Tlačítko MENU: Press to browse different interfaces. Press and hold for five seconds to enter or exit parameter settings.
- Tlačítko NAHORU: Press to increase the value during parameter settings.
- DOWN/HM Button: Press to decrease the value during parameter settings.
6.3. Nastavení parametrů
To configure parameters, navigate through the display interfaces using the MENU button. When on the desired parameter screen (e.g., battery type, float voltage), press and hold the MENU button for five seconds to enter the setting mode. The number will flash, allowing adjustment with the UP and DOWN buttons. Press and hold MENU again for five seconds to save and exit.
Image 6.2: Flowchart showing how to browse interfaces and set parameters, including main display, floating voltage, discharge arrest, battery type, working methods, and reconnecting discharge.
- Výchozí nastavení: The controller comes with factory default settings for charging and discharging. You can restore these by pressing and holding the UP button for five seconds on interfaces 2-5.
- Typ baterie: Select the correct battery type (e.g., GEL, AGM, OPEN) to ensure proper charging algorithms.
- Float Voltage: Voltage at which the battery is maintained after being fully charged.
- Znovu připojit vybití: Voltage at which the load will reconnect after being disconnected due to low battery.
- Zastávka vypouštění: Voltage at which the load will disconnect to protect the battery from over-discharge.
- Pracovní metody: Configure load control modes (e.g., 24H for continuous operation, timer settings).
6.4. Duální porty USB
The controller is equipped with two 5V/2A USB ports, allowing you to charge compatible mobile phones and other 5V devices directly from the controller.
7. Údržba
- Pravidelně kontrolujte těsnost a korozi všech kabelových spojů.
- Udržujte regulátor čistý a bez prachu a nečistot.
- Zajistěte dostatečné větrání kolem regulátoru, aby nedošlo k přehřátí.
- Monitor the LCD display periodically to ensure correct operation and parameter settings.
8. Řešení problémů
| Situace | Pravděpodobná příčina | Řešení |
|---|---|---|
| Charge not on or load not on when sunny | Solar panel open or reversed | Zkontrolujte připojení |
| Load not on when sunny | Nesprávné nastavení režimu | Nastavte znovu |
| Load not on when sunny | Vybitá baterie | Dobít |
| Ikona zatížení pomalu bliká | Ochrana proti zkratu | Remove load |
| Vypněte napájení | Baterie nízká objtage | Nabijte baterii |
9. Technické specifikace
- Model: 60A PWM solární regulátor nabíjení
- Jmenovitý objemtage: 12V / 24V Auto
- Jmenovitý proud: 60A
- Max. PV svtage: 50V
- Max. vstupní výkon FV panelů: 780 W (24V) / 390 W (12 V)
- Materiál: Akrylonitrilbutadienstyren (ABS)
- Typ displeje: LCD
- Rozměry produktu: 7.09 x 1.77 x 3.54 palce
- Hmotnost položky: 13.4 unce
- Zahrnuté komponenty: PWM solární regulátor
10. Záruka a podpora
For warranty information or technical support, please refer to the product packaging or contact Anern customer service directly. Keep your purchase receipt for warranty claims.
