Motorcycle Front Windshield Deflector Cover User Manual

Zavedení

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your new carbon fiber front windshield deflector cover. Designed specifically for Triumph Bonneville Scrambler 1200 XE, XC, and BE models manufactured between 2019 and 2023, this accessory enhances the aesthetic and aerodynamic profile of your motorcycle.

Please read this manual thoroughly before attempting installation or use to ensure safe and correct application. Keep this manual for future reference.

Obsah balení

Before beginning installation, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support immediately.

• 1 x Carbon Fiber Front Windshield Deflector Cover
• Mounting Hardware Kit (bolts, washers, spacers as required)
• Instalační příručka (tento návod)

Bezpečnostní informace

Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.

• Ensure the motorcycle is stable and securely parked on a level surface before beginning any work.
• Turn off the engine and remove the key to prevent accidental starting.
• Používejte vhodné osobní ochranné prostředky (OOP), jako jsou rukavice a ochrana očí.
• Use only the provided mounting hardware. Do not substitute parts unless explicitly instructed.
• Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným motocyklovým mechanikem.
• Do not overtighten bolts, as this can strip threads or crack components. Refer to torque specifications if available.

Nastavení a instalace

Follow these steps carefully to install the deflector cover. It is recommended to have a second person assist during certain steps to hold components in place.

1. Příprava: Clean the area around the existing windshield or headlight assembly where the deflector will be mounted. Ensure it is free of dust, dirt, and grease.

   Note: No product images were provided. An image here would typically show the motorcycle's front end before installation, highlighting the mounting points.
2. Positioning the Deflector: Carefully align the deflector cover with the mounting points on your motorcycle. These points are typically located near the headlight or existing windshield brackets.

   Note: No product images were provided. An image here would show the deflector being held in place, aligning with the motorcycle's frame or existing mounts.

3. Attaching Hardware: Insert the provided bolts through the deflector's mounting holes and into the corresponding points on the motorcycle. Use washers and spacers as indicated in the hardware kit to ensure a snug fit and prevent scratching. Hand-tighten all bolts initially.

   Note: No product images were provided. An image here would detail the specific hardware components and how they are assembled at a mounting point.

4. Konečné utažení: Once all bolts are in place and the deflector is properly aligned, progressively tighten each bolt using appropriate tools. Tighten evenly to avoid stressing the material. Do not overtighten.

   Note: No product images were provided. An image here would show the deflector fully installed and secured.
5. Kontrola stability: Gently shake the deflector to ensure it is securely mounted and does not wobble. Re-tighten if necessary.

   Note: No official product videos were provided. A video here would demonstrate the final stability check, showing the deflector firmly in place. Max width for videos is 420px.

Návod k obsluze

The deflector cover is a static accessory and does not require active operation. Once installed, ensure it remains securely fastened before each ride. Periodically check the mounting bolts for tightness, especially after riding on rough terrain or at high speeds.

Údržba

Proper maintenance will extend the life and preserve the appearance of your carbon fiber deflector cover.

• Čištění: Clean the carbon fiber surface with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish. Rinse thoroughly with clean water and dry with a soft, lint-free cloth.
• Inspekce: Regularly inspect the deflector for any signs of damage, cracks, or loose mounting hardware. Address any issues promptly.
• Ochrana: While carbon fiber is durable, prolonged exposure to direct sunlight can affect its finish over time. Consider using a UV protectant spray designed for automotive finishes if desired.

Odstraňování problémů

Specifikace

• Materiál: High-quality Carbon Fiber
• Barva: Carbon Fiber Weave (Gloss Finish)
• Kompatibilita: Triumph Bonneville Scrambler 1200 XE, XC, BE (Model Years 2019, 2020, 2021, 2022, 2023)
• Rozměry: (Approximate, specific dimensions not provided) Designed to fit OEM mounting points.

Informace o záruce

This product is covered by a limited warranty against manufacturing defects. The warranty period and terms may vary. Please retain your proof of purchase. For specific warranty details, refer to the product packaging or contact the seller/manufacturer directly.

Zákaznická podpora

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact our customer support team. Provide your product model and purchase details for faster service.

Kontaktní informace (např. e-mail, telefonní číslo, webstránky) by zde obvykle poskytoval výrobce.