WilTec 7010044

WilTec Catfree Ultrasonic Cat Repellent 88 m²

Model: 7010044

Zavedení

Thank you for choosing the WilTec Catfree Ultrasonic Cat Repellent. This device is designed to humanely deter cats from specific areas using ultrasonic sound waves, providing an effective and harmless solution for your garden, pond, sandbox, or flower beds. Please read this manual carefully before installation and use to ensure optimal performance and safety.

Bezpečnostní informace

Konec produktuview

The WilTec Catfree is an ultrasonic cat repellent featuring a motion sensor and weatherproof design for year-round outdoor use. It operates on a 9V battery or an optional power adapter.

Přední view of the WilTec Catfree Ultrasonic Cat Repellent

Obrázek 1: Přední view of the WilTec Catfree Ultrasonic Cat Repellent, showing the motion sensor and speaker grille.

Zadní view of the WilTec Catfree Ultrasonic Cat Repellent with battery compartment

Obrázek 2: Zadní view of the WilTec Catfree Ultrasonic Cat Repellent, illustrating the wall-mounting slot and battery compartment cover.

Klíčové vlastnosti:

Nastavení a instalace

1. Napájení zařízení:

The Catfree can be powered by a 9V battery or an optional AC power adapter.

  1. Instalace baterie:
    1. Locate the battery compartment on the back of the device (refer to Image 2).
    2. Otevřete kryt přihrádky.
    3. Vložte novou 9V baterii a dbejte na správnou polaritu.
    4. Bezpečně zavřete kryt přihrádky na baterie, aby byla zachována odolnost vůči povětrnostním vlivům.
  2. AC Power Adapter (Optional):

    For continuous operation and increased signal intensity (up to 20% stronger), an optional AC power adapter can be used. Connect the adapter to the designated port on the device. The adapter is not included and must be purchased separately.

2. Doporučení pro umístění:

Optimal detection and effectiveness are achieved with correct placement.

WilTec Catfree installed in a garden with a stake

Obrázek 3: The Catfree device installed in a garden using the provided stake, positioned at an optimal height for cat detection.

Návod k obsluze

  1. Aktivace: Once the battery is installed or the power adapter is connected, the device is active. There is no separate ON/OFF switch.
  2. Detekce pohybu: The integrated motion sensor continuously monitors the designated area.
  3. Ultrasonic Emission: When a cat enters the detection zone, the motion sensor triggers the device to emit a burst of ultrasonic sound (20-24 kHz). This sound is designed to be unpleasant for cats, encouraging them to leave the area.
  4. Inaudible to Humans: The ultrasonic frequency is typically beyond the range of human hearing, making the device discreet in operation.
  5. LED indikátor: A small LED light on the device will illuminate when the 9V battery charge is low, indicating it's time for a replacement.

The Catfree operates automatically, providing continuous protection against feline intruders.

Údržba

Odstraňování problémů

ProblémMožná příčinaŘešení
Device does not seem to be working.
  • Baterie je vybitá nebo nesprávně nainstalovaná.
  • No power from AC adapter.
  • Snímač pohybu je zablokovaný.
  • Check and replace the 9V battery, ensuring correct polarity.
  • Verify AC adapter connection and power source.
  • Clear any obstructions from the motion sensor's view.
Cats are not deterred.
  • Incorrect placement (too low, too high, or obstructed).
  • Device is too far from the target area.
  • Some cats may be less sensitive to ultrasonic frequencies.
  • Battery is low (reduced signal strength).
  • Adjust placement to cat height and ensure a clear detection path.
  • Consider adding another unit for larger areas or using an AC adapter for increased signal strength.
  • Ensure the battery is fresh or use an AC adapter.
Low battery LED is on.9V battery is low or depleted.Okamžitě vyměňte 9V baterii.

Specifikace

Model:7010044
Rozměry (D x Š x V):9.5 x 15.5 x 5 cm
Hmotnost:130 gramů
Materiál:Plast
Zdroj napájení:1 x 9V Battery (not included) or Optional AC/DC Adapter (not included)
Ultrazvuková frekvence:20 - 24 kHz
Motion Sensor Detection Angle:100°
Motion Sensor Detection Distance:Až 10 metrů
Oblast pokrytí:Přibližně 88 m²
Odolnost vůči počasí:Ano, vhodné pro venkovní použití

Související dokumenty - 7010044

Předview Návod k montáži dřevěného kočičího domku odolného proti povětrnostním vlivům WilTec 52200
Podrobný návod k montáži dřevěného vodotěsného kočičího domku WilTec 52200. Obsahuje seznam dílů a podrobný návod pro stavbu kočičího přístřešku.
Předview Montážní návod pro WilTec 52201 Dřevěný kočičí domek s terasou odolnou proti povětrnostním vlivům
Podrobný návod k montáži dřevěného vodotěsného kočičího domku WilTec 52201, včetně domku a terasy. Tento návod obsahuje podrobné pokyny a seznam dílů pro snadnou montáž.
Předview Návod k obsluze a bezpečnostní příručka k benzínovému křovinořezu Wiltec s kolečky
Komplexní návod k obsluze a bezpečnostní příručka pro benzínový křovinořez Wiltec s koly (model 64746). Zahrnuje správné použití, údržbu, řešení problémů a bezpečnostní opatření pro bezpečný a efektivní provoz.
Předview Ponorné čerpadlo Wiltec 65336-65343 – uživatelská příručka
Komplexní uživatelská příručka pro ponorné čerpadlo Wiltec (modely 65336-65343), zahrnující obsluhu, bezpečnostní pokyny, technické specifikace, údržbu a řešení problémů.
Předview Ponorné čerpadlo WilTec 65044 400 W / 6000 l/h Návod k obsluze
Podrobný návod k obsluze a bezpečnosti pro ponorné čerpadlo WilTec 65044 (400 W, 6000 l/h). Zahrnuje instalaci, údržbu, řešení problémů a likvidaci tohoto čerpadla na vodu do sklepa/suterénu.
Předview Manuál použití: Mini inkubátor na 12 kusů Wiltec 52016
Scopri přicházejí s použitím mini-inkubátoru Wiltec za 12 kusů (model 52016) s kompletním manuálem používání. Zahrnout istruzioni dettagliate, consigli per l'incubazione e risoluzione problemi.