1. Úvod
The FireAngel FA6812 is a digital carbon monoxide (CO) detector designed to provide reliable protection against the dangers of CO gas. Carbon monoxide is an invisible, odorless, and potentially fatal gas. This device features an electrochemical sensor with a 10-year lifespan and an LCD screen for clear display of CO levels and device status. Early detection and warning are crucial for preventing CO poisoning.
Figure 1: FireAngel FA6812 Carbon Monoxide Detector
This manual will guide you through the installation, operation, and maintenance of your FA6812 detector to ensure optimal performance and safety.
2. Nastavení a instalace
2.1 Obsah balení
- FireAngel FA6812 Alarm oxidu uhelnatého
- 2 x AA baterie
- Montážní šrouby a hmoždinky
- Uživatelská příručka
2.2 Instalace baterie
The FA6812 detector requires 2 AA batteries for operation. These are included in the package. To install the batteries:
- Najděte přihrádku na baterie na zadní straně jednotky.
- Otevřete kryt bateriového prostoru.
- Insert the 2 AA batteries, ensuring correct polarity (+ and -).
- Bezpečně zavřete kryt bateriového prostoru.
The device will emit a short beep and the LCD will activate, indicating successful battery installation.
2.3 Doporučení pro umístění
For optimal CO detection, consider the following placement guidelines:
- Obecné umístění: Install the detector at mid-height in a room, as carbon monoxide mixes evenly with air. Avoid placing it near the floor or ceiling.
- Proximity to Appliances: Place the detector at least 3 meters (10 feet) away from any fuel-burning appliances (e.g., boilers, gas stoves, fireplaces).
- Prostory pro spaní: For maximum protection, install a detector in or near sleeping areas.
- Vyhněte se překážkám: Ensure the detector is not obstructed by furniture, curtains, or other objects that could block the sensor.
- Environmentální faktory: Avoid placing the detector in direct sunlight, in areas of high humidity (e.g., bathrooms), or near ventilation openings.
2.4 Možnosti montáže
The FA6812 can be used freestanding or wall-mounted.
- Volné stání: The compact and portable design allows the unit to be placed on a flat surface, such as a shelf or table.
- Montáž na stěnu: Use the integrated mounting bracket and provided screws to securely attach the detector to a wall. Ensure the mounting location adheres to the placement recommendations above.
Obrázek 2: Produkt nadview s klíčovými vlastnostmi
3. Provoz
3.1 Indikace na LCD displeji
The digital LCD screen provides real-time information about the detector's status:
- Pohotovostní režim: Displays the current CO level in parts per million (ppm). If no CO is detected, it will show '0 ppm'.
- CO alarm: When dangerous CO levels are detected, the screen will display the CO concentration in ppm, accompanied by an audible alarm and a flashing red light.
- "AL" (Alarm in Absence): If a CO alarm triggers while you are away, the device will enter "Alarm in Absence" mode. The screen will display "AL", and the unit will beep every 40 seconds with a red flashing light until deactivated.
- Stav baterie: An icon indicates the battery level. A flashing orange "!" and continuous beep signify low batteries.
- "EOL" (End of Life): This indicator signals that the device has reached the end of its 10-year operational life and needs replacement.
Figure 3: Multifunction LCD Screen
3.2 Aktivace alarmu
In the event of CO detection, the FA6812 will:
- Emit four loud beeps (85 dB(A) at 3m minimum).
- Flash a red LED light.
- Display the CO concentration in ppm on the LCD screen.
Pokud zní alarm:
- Immediately move to fresh air outdoors or open all doors and windows.
- Proveďte spočítání osob, abyste se ujistili, že jsou všechny osoby započítány.
- Nevstupujte do prostor, dokud neustane alarm a prostor nebude důkladně vyvětrán.
- Seek medical attention for anyone experiencing symptoms of CO poisoning (headache, nausea, dizziness).
- Contact the appropriate emergency services or a qualified technician to investigate the source of the CO.
3.3 Sleep Easy™ Function
The Sleep Easy™ function allows you to temporarily silence the low battery warning for 8 hours. To activate:
- Press and hold the test button when the low battery warning sounds.
During this period, the orange indicator light will continue to flash, and the device remains fully functional for CO detection. This feature is designed for convenience, but batteries should be replaced as soon as possible.
Obrázek 4: Pokročilé funkce
4. Údržba
4.1 Pravidelné testování
It is recommended to test your CO detector monthly to ensure it is functioning correctly. To perform a test:
- Press and hold the 'TEST' button on the front of the unit.
- The alarm will sound, and the red LED will flash, indicating the alarm is working.
- Uvolněte tlačítko pro zastavení testu.
4.2 Výměna baterie
When the batteries are low, the detector will indicate this with a flashing orange "!" on the LCD and a continuous beep. Replace the batteries immediately to maintain continuous protection. Refer to section 2.2 for battery installation instructions.
4.3 End of Life (EOL) Indication
The FA6812 has a 10-year lifespan. When the device reaches its end of life, the LCD will display "EOL". At this point, the detector should be replaced with a new unit to ensure continued safety.
4.4 Čištění
Dust and debris can affect the detector's performance. Gently clean the exterior of the unit with a soft, damp cloth. Do not use cleaning agents or solvents, as these can damage the sensor or casing. Do not paint the detector.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Alarm sounds and LCD shows CO level | Detekován oxid uhelnatý | Follow alarm activation procedures (Section 3.2). Evacuate, ventilate, seek medical help if needed, and identify CO source. |
| Flashing orange "!" and continuous beep | Upozornění na vybitou baterii | Replace batteries immediately (Section 4.2). Use Sleep Easy™ function if temporary silence is needed. |
| LCD displays "AL" and beeps every 40 seconds | Alarm in Absence triggered | A CO alarm occurred while you were away. Investigate potential CO sources and ventilate the area. |
| LCD displays "EOL" | Konec životnosti produktu | Replace the detector with a new unit. The sensor is no longer reliable after 10 years. |
| No display or unit unresponsive | No batteries, incorrect battery installation, or faulty unit | Check battery installation and polarity. Replace batteries. If still unresponsive, the unit may be faulty and require replacement. |
6. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | FA6812-EUX10 |
| Typ snímače | Elektrochemické |
| Životnost senzoru | 10 roky |
| Zdroj napájení | 2 x AA alkalické baterie (součástí balení) |
| Hlasitost alarmu | 85 dB(A) at 3 meters (minimum) |
| Zobrazit | Digitální LCD |
| Rozměry (D x Š x V) | 120 x 73 x 35.5 mm |
| Hmotnost | 145 gramů |
| Provozní teplota | 0 °C až 40 °C |
| Provozní vlhkost | 30% až 90% RH (bez kondenzace) |
| Dodržování | BS EN 50291-1:2018, BS EN 50291-2:2019, CE Marked |
| UPC | 816317006860 |
7. Záruka a podpora
7.1 Informace o záruce
The FireAngel FA6812 Carbon Monoxide Detector is designed for long-term reliability. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official FireAngel website. Warranty periods may vary by region.
7.2 Zákaznická podpora
If you have any questions, require technical assistance, or need to report an issue with your FireAngel FA6812 detector, please contact FireAngel customer support. Contact details can typically be found on the product packaging or the official FireAngel webweb (www.fireangeltech.com).
