Zavedení
This manual provides detailed instructions for the safe and effective use of your WUBEN E7 and WUBEN L3 Rechargeable Flashlight Bundle. Please read this manual thoroughly before operating the flashlights and retain it for future reference.
Image: The WUBEN E7 mini flashlight and the WUBEN L3 tactical flashlight shown together.
Nastavení
WUBEN L3 Battery Installation & Initial Charge
- Odstraňte izolaci baterie: Unscrew the tail cap of the WUBEN L3 flashlight. Locate and remove the blue insulation sheet covering the battery. This sheet prevents battery discharge during shipping.
- Znovu vložte baterii: Ensure the battery is inserted with the positive (+) end facing towards the head of the flashlight.
- Bezpečná koncovka: Screw the tail cap back on tightly. The flashlight features a weather-sealing O-ring to ensure water resistance when properly closed.
- Počáteční nabíjení: Twist the ring near the head of the L3 flashlight to reveal the USB-C charging port. Connect the provided Type-C charging cable to the port and a compatible USB power source. The indicator light will be red during charging and turn blue when fully charged. Charging from empty to full takes approximately 100-160 minutes depending on the charger (e.g., 9V/2A: ~100 mins, 5V/2A: ~160 mins).
Image: The WUBEN L3 flashlight being charged via its USB-C port, illustrating its fast-charging feature.
WUBEN E7 Initial Charge
The WUBEN E7 also features a USB-C charging port. Connect it to a compatible USB power source using the provided cable. Refer to the indicator light for charging status (red for charging, blue for fully charged).
Attaching Accessories (WUBEN L3)
- Spona na opasek: The L3 flashlight comes with a removable belt clip for convenient carrying. It can be attached or removed by sliding it along the body of the flashlight.
- Šňůrka: A lanyard is included for added security and ease of access. Attach it to the designated loop on the tail cap.
Návod k obsluze
WUBEN L3 Flashlight Operation
The WUBEN L3 is controlled by a single tail switch button.
- Okamžitě zapnuto: Tap the tail switch button for momentary illumination. The light will turn off when the button is released.
- Neustálé zapnutí/vypnutí: Fully press and click the tail switch button to turn the flashlight on or off.
- Mode Switching (Low, Medium, High): When the flashlight is on, lightly tap the tail switch (without clicking) to cycle through the brightness modes: Moon (5 lumens) → Nízká (150 lumenů) → Střední (500 lumenů) → Vysoká (1500 lumenů). The flashlight will remember the last used mode when turned off and on again.
- Turbo Mode (3000 lumens): From any mode, press and hold the tail switch for approximately 0.5 seconds to activate Turbo režim (3000 lumens). Release the button to return to the previously used mode. Note: The L3 will automatically step down from 1500 lumens (High mode) to 1100 lumens after 4 minutes to prevent overheating.
- Stroboskopický režim: Double-click the tail switch to activate Stroboskopický režim.
- Režim SOS: Triple-click the tail switch to activate Režim SOS.
WUBEN E7 Flashlight Operation
The WUBEN E7 offers 6 lighting modes and a memory function.
- Přepínání režimů: Click the switch and long press to trigger gear selection (specific details on button interaction for E7 are not fully provided in the source, but generally implies cycling through modes).
- Režim Super jas: Double-click the switch to activate Super Bright mode (1800 lumenů).
- Burst Flash Mode: Triple-click the switch to activate Burst Flash mode (Strobe).
- Funkce zámku: Four consecutive clicks will lock the flashlight to prevent accidental activation.
- Funkce paměti: The E7 will remember the last used brightness mode when turned off and on.
Image: Key features of the WUBEN E7, including maximum output, beam distance, runtime, drop resistance, waterproofing, and floodlight angle.
Power Bank Function (WUBEN L3)
The WUBEN L3 can function as a power bank to charge other devices.
- Aktivace powerbanky: Twist the ring near the head of the L3 flashlight to reveal the USB-C port. Connect your device (e.g., smartphone) to the L3 using a compatible USB-C cable.
- výstup: The L3 provides up to 18W output for charging. Note that actual output may vary depending on the connected device and cable.
Image: The WUBEN L3 flashlight connected to a smartphone, demonstrating its capability to act as a backup power source.
Údržba
- Čištění: Pravidelně čistěte tělo svítilny měkkým hadříkemamp cloth. Keep the lens free of dust and debris for optimal light output.
- Údržba O-kroužku: The L3 flashlight uses O-rings for waterproofing. Periodically inspect the O-rings for wear and tear. Lubricate them with silicone grease if necessary to maintain the IP68 rating. Replacement O-rings are included in the package.
- Péče o baterie: Store the flashlights in a cool, dry place. If storing for extended periods, charge the batteries to approximately 50% capacity to prolong their lifespan. Avoid fully discharging the batteries.
- Hydroizolace: Both E7 and L3 models are IP68 rated, meaning they are protected against dust ingress and can withstand immersion in water up to 2 meters for 1 hour. Ensure all caps and ports are securely closed before exposing the flashlights to water.
Image: WUBEN E7 flashlights showcasing their magnetic base and IP68 waterproof design in a rainy environment.
Odstraňování problémů
- Svítilna se nezapíná:
- Ensure the battery insulation sheet has been removed (for L3).
- Zkontrolujte, zda je baterie vložena správně se správnou polaritou.
- Verify the battery is charged. Refer to the power indicator.
- For E7, check if the lock function is activated (four clicks to unlock).
- Flashlight Overheating (L3): The L3 is designed to automatically reduce brightness from 1500 lumens (High mode) to 1100 lumens after 4 minutes to manage heat. This is a normal safety feature. If the flashlight becomes excessively hot to touch, turn it off and allow it to cool down.
- Problémy s nabíjením:
- Ensure the USB-C cable is securely connected to both the flashlight and the power source.
- Zkuste jiný kabel USB-C nebo napájecí adaptér.
- Verify the charging port is clean and free of debris.
- Power Bank Function Not Working (L3): Ensure the L3 battery has sufficient charge. Some devices may require specific charging protocols not fully supported by the L3's 5V output.
Specifikace
Mini svítilna WUBEN E7
- Maximální výstup: 1800 XNUMX lumenů
- LED: P9 LED s vysokým podáním barev 6500K
- Úhel osvětlení reflektorem: 175° ultraširokoúhlý
- Režimy: High/Med/Low/Super Bright/Strobe/SOS (6 modes with memory function)
- Hodnocení voděodolnosti: IP68
Image: Comparison of light output and color temperature from the WUBEN E7, showing Cool White 6500K and Medium White 5000K.
Taktická svítilna WUBEN L3
- Maximální výstup: 3000 XNUMX lumenů
- Maximální vzdálenost paprsku: 226 metrů
- Baterie: 4800mAh Rechargeable Li-ion (21700, 3.7V, 17.76Wh)
- Nabíjení: Dual-way USB-C (Max 18W input/output)
- Režimy: Turbo/High/Med/Low/Moon/Strobe/SOS (7 modes with mode memory)
- Hodnocení voděodolnosti: IP68
- Materiál: III MIL-Spec Anodized Finish
Image: The WUBEN L3 flashlight demonstrating its ultra-bright output of 3000 lumens over a significant distance in an outdoor setting.
Záruka a podpora
For warranty information, technical support, or any inquiries regarding your WUBEN E7 & L3 Flashlight Bundle, please refer to the official WUBEN website or contact WUBEN customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the official WUBEN store for more information: Obchod WUBEN
