Uživatelská příručka k přenosnému detektoru oxidu uhelnatého 3 v 1 HAKINAKU D6

Zavedení

The HAKINAKU D6 is a compact, portable 3-in-1 detector designed to monitor Carbon Monoxide (CO) levels, temperature, and humidity. It features an electrochemical sensor for accurate, real-time readings and a rechargeable battery for extended use. This manual provides instructions for proper setup, operation, and maintenance to ensure your safety.

Obsah balení

• HAKINAKU D6 Portable Carbon Monoxide Detector x1
• Uživatelská příručka x1
• Nabíjecí kabel typu C x 1
• Šňůrka na krk x1

Vlastnosti produktu

• Funkce 3 v 1: Monitors Carbon Monoxide (CO), ambient temperature, and humidity.
• Mini & Portable Design: Compact dimensions (3.3 x 2.0 x 0.66 inches) and lightweight (1.6 ounces) with a lanyard for easy carrying.
• 1.9" HD Color Display: Provides clear, real-time readings of CO concentration, humidity, and temperature.
• Elektrochemický senzor: Ensures accurate and rapid detection of CO with data refreshed every 2 seconds.
• Dobíjecí baterie: Built-in 1000 mAh Lithium Polymer battery offers up to 120 hours of working time on a full charge.
• Power-Save Mode: Backlight automatically turns off after a period of inactivity to conserve battery, while continuous monitoring persists.
• Integrovaný stojánek: Allows for convenient tabletop placement.

Nastavení

1. Počáteční nabíjení

Before first use, fully charge the detector using the provided Type-C USB cable. Connect the cable to the device's Type-C port and a standard USB power adapter (not included). The battery icon on the display will indicate charging status.

2. Zapnutí/vypnutí

• Zapnutí: Long press the power button (central button) until the display illuminates.
• Vypnutí: Long press the power button until the display turns off.

Návod k obsluze

1. Zobrazení informací

Upon powering on, the 1.9" HD color display will show:

• Koncentrace CO: Displayed in Parts Per Million (PPM).
• Vlhkost: Zobrazeno v procentechtage (pravá ruka).
• Teplota: Displayed in Fahrenheit (°F) or Celsius (°C).
• Úroveň baterie: An icon indicating the current battery charge.
• Stav alarmu: An icon indicating if the audible alarm is active.

2. Changing Temperature Units

Short press the power button (central button) to toggle between Fahrenheit (°F) and Celsius (°C) temperature display.

3. Adjusting Screen Brightness

Short press the 'M' button (left button) to cycle through different screen brightness levels.

4. Alarm Sound Control

Short press the 'S' button (right button) to toggle the audible alarm sound on or off. The speaker icon on the display indicates the current status.

5. Power-Save Mode

The screen backlight will automatically turn off after 30-60 seconds of no operation or alarm signal to conserve battery. The detector continues to monitor CO every 2 seconds. Press any button to reactivate the backlight.

CO Alarm Thresholds

Testování detektoru

To ensure the carbon monoxide detector is functioning correctly, you can perform a simple test:

1. Light a piece of paper or a cigarette.
2. Extinguish the flame, allowing it to produce thick smoke.
3. Hold the detector close to the smoke for 5-10 seconds, allowing the smoke to enter the ventilation holes.
4. The CO concentration on the screen should increase, and the detector will sound an audible alarm if the concentration exceeds the threshold.

Poznámka: Do not test with car exhaust or in overly airy places, as low CO concentrations may not trigger the sensor.

Pokyny pro umístění

The HAKINAKU D6 is designed for portability and can be used in various indoor and outdoor environments. Consider placing it in areas where CO may accumulate or where you need to monitor air quality.

• Cestovat: Hotels, Airbnb, RVs, camping tents, boats, aircraft.
• Domov: Bedrooms, living rooms, kitchens (away from direct cooking fumes), areas with fuel-burning appliances.
• Práce: Offices, warehouses, workshops.

Údržba

1. Nabíjení

When the battery is low, the detector will sound an audible 'di' every minute. Recharge the device using the provided Type-C cable. The device can operate while charging.

2. Čištění

Wipe the exterior of the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the ventilation holes are clear of dust and debris.

Odstraňování problémů

• Žádný displej/zařízení se nezapíná: Ujistěte se, že je zařízení plně nabité. Dlouze stiskněte tlačítko napájení pro jeho zapnutí.
• Nepřesná čtení: Ensure the ventilation holes are not obstructed. Avoid placing the detector in areas with extreme temperatures or humidity, or near strong air currents.
• Alarm zní nepřetržitě: If the alarm sounds without a known CO source, move the detector to a well-ventilated area. If the alarm persists, contact customer support.
• Upozornění na vybitou baterii: Recharge the device promptly.

Specifikace

Bezpečnostní informace

Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that can be fatal. It is produced by incomplete combustion of carbon-containing materials. Always be aware of potential CO sources.

Symptoms of CO Poisoning:

• Mild exposure: Mild headache, nausea, vomiting, fatigue (often mistaken for flu-like symptoms).
• Medium exposure: Severe headache, dizziness, drowsiness, confusion.
• Extrémní expozice: Bezvědomí, křeče, kardiorespirační selhání, smrt.

If the detector alarms, immediately move to fresh air and seek medical attention. Do not ignore the alarm.

Záruka a podpora

The HAKINAKU D6 Carbon Monoxide Detector comes with a 5-year free exchange warranty for any quality issues. Customer satisfaction is a primary goal. If you encounter any problems or have questions regarding your product, please contact customer support for assistance.

Výrobce: Shenzhen Huidu Technology Co., Ltd.