ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Úvod

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Obrázek 1.1: Přední strana view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Bezpečnostní informace

Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob, vždy dodržujte tato základní bezpečnostní opatření:

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistky nebo jističe.
• Tento produkt musí být instalován v souladu s platným instalačním předpisem osobou obeznámenou s konstrukcí a provozem produktu a souvisejícími riziky.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
• Toto svítidlo je vhodné pouze pro vnitřní použití.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Montážní materiál (šrouby, matice)
• E26 Adapter Accessories (for recessed can installation)
• Návod k použití (tento dokument)

Obrázek 3.1: Dodávané příslušenství pro instalaci.

4. Vlastnosti produktu

• 3CCT Volitelné: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Pohybový senzor: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Nastavitelné časové zpoždění: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Světelný senzor: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Energeticky účinný: 16W LED provides 1000 lumens of brightness.
• Všestranná instalace: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Nastavení a instalace

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Vyjměte čočku otočením ve směru hodinových ručiček.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Vyjměte čočku otočením ve směru hodinových ručiček.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Návod k obsluze

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Funkce pohybového senzoru

• Denní doba: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Ujistěte se, že je vypnuté napájení.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Nastavení časového zpoždění

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Ujistěte se, že je vypnuté napájení.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Údržba

The ECOELER LED ceiling light requires minimal maintenance.

• Čištění: Před čištěním se ujistěte, že je přístroj vypnutý. Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Čočka: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Řešení problémů

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Specifikace

10. Záruka a podpora

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webmísto.

Výrobce: ECOELER ELECTRIC INC