Konec produktuview
The CYCLAMI Ultralight TPU Mountain Bike Inner Tubes are designed for mountain bikes and road bikes, offering a lightweight and durable alternative to traditional butyl rubber tubes. These tubes are compatible with 26x1.9-2.5" tires and feature a 45mm French Presta valve. They are engineered for enhanced performance, including reduced rotational weight, improved puncture resistance, and lower rolling resistance.
- Univerzální fit: Compatible with 26x1.9-2.5" tires and 45mm Presta valves.
- Ultralehký: Weighing approximately 63g per tube, significantly lighter than standard butyl tubes.
- Odolnost na vojenské úrovni: Constructed with 0.3mm reinforced TPU walls for superior puncture resistance and pressure handling (up to 150 PSI).
- Low Rolling Resistance: Ředidlo profile minimizes tire friction for improved speed and efficiency.
Průvodce instalací
Proper installation is crucial for optimal performance and longevity of your CYCLAMI TPU inner tube. Follow these steps carefully.
Kontrola před instalací
Before installing the new TPU inner tube, ensure there are no foreign objects inside the tire or on the rim strip that could cause punctures. Inspect the tire thoroughly for any sharp debris.
Figure 1: Cleaning the inner tube pad and outer tire to remove foreign objects.
Instalace krok za krokem
- Prepare the Inner Tube: Slightly inflate the TPU inner tube (less than 3 PSI) to give it shape. This helps prevent pinching during installation. WARNING: Do not inflate the empty inner tube more than 5 PSI, as this can cause irreversible damage.
- Zkontrolujte netěsnosti: Immerse the slightly inflated inner tube in water to check for any air leaks. If bubbles appear, indicating a leak, do not proceed with installation and contact support.
- Vložený ventil: Locate the air nozzle hole on the wheel hub. Insert the Presta valve of the TPU inner tube through this hole.
- Poloha vnitřní trubky: Carefully place the inner tube inside the outer tire, ensuring it is evenly distributed around the rim.
- Install Outer Tire: Begin installing one bead of the outer tire onto the wheel hub. Then, carefully work the second bead onto the rim. This step requires patience to avoid pinching the inner tube. Tire levers can be used, but exercise extreme caution to prevent damaging the TPU tube.
- Nahustit: Once the outer tire is fully seated, inflate the inner tube to the recommended pressure. Refer to the maximum air pressure indicated on your tire (e.g., 120 PSI / 8.3 BAR).
- Apply Nozzle Sticker: Install the provided nozzle sticker over the valve stem base to help prevent dust and water from entering the tire's interior.
Video 1: Detailed installation guide for CYCLAMI TPU inner tubes. This video demonstrates the steps from preparing the tube to final inflation and sealing.
Figure 2: Inflating the TPU inner tube after installation.
Použití a údržba
Maintaining Tire Pressure
Regularly check your tire pressure using a reliable gauge. Maintaining the correct pressure, as indicated on your tire sidewall, is essential for performance, comfort, and puncture prevention. Over-inflation or under-inflation can lead to issues.
Puncture Repair
In the event of a puncture, CYCLAMI TPU inner tubes can be repaired using a standard TPU patch kit. Ensure the area around the puncture is clean and dry before applying the patch. No glue is required for these self-adhesive patches.
Video 2: Demonstration of repairing a TPU inner tube with a patch kit. This video illustrates the simple process of applying a self-adhesive patch.
Figure 3: Easy and convenient repair of a TPU inner tube using a patch.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Časté defekty | Debris in tire, improper tire pressure, sharp rim strip. | Thoroughly inspect tire and rim strip for debris. Maintain correct tire pressure. Replace worn rim strip. |
| Air Leakage (slow) | Small puncture, loose valve core, valve stem issue. | Check for punctures and patch if necessary. Tighten valve core. Inspect valve stem for damage. |
| Tube Pinching during Installation | Insufficient pre-inflation, improper tire seating. | Ensure tube is slightly inflated (less than 3 PSI) before seating. Carefully work tire beads onto rim, avoiding pinching. |
Specifikace produktu
| Funkce | Detail |
|---|---|
| Značka | CYKLAMI |
| Název modelu | MTB 26 |
| Materiál | TPU |
| Kompatibilní velikost pneumatiky | 26x1.9-2.5 inches |
| Typ ventilu | Presta |
| Délka ventilu | 45 mm (1.77 palce) |
| Hmotnost položky | Approximately 63 Grams per tube |
| Maximální tlak | 150 PSI / 8.3 BAR |
Záruka a podpora
Tento produkt CYCLAMI je dodáván s 1-letá záruka. For any defects or issues, please contact our customer support. We offer 24/7 expert troubleshooting and a free replacement within 48 hours for any manufacturing defects, with no returns required.
Pro další pomoc prosím navštivte CYCLAMI Store nebo se podívejte na kontaktní informace uvedené při nákupu.