Návod k obsluze pro sadu 3 pedálů Fanatec CSL Elite Pedals V2 Sim Racing

Zavedení

The Fanatec CSL Elite Pedals V2 are a high-performance 3-pedal set designed for sim racing enthusiasts. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your pedal set, ensuring optimal performance and longevity.

Image: Fanatec CSL Elite Pedals V2, a three-pedal set.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• CSL Elite Pedals V2 (three-pedal set, fully assembled)
• Alternative elastomers and metal spring for brake tuning
• 2x Brake pedal assembly helper
• 1x Wheel Base connection cable RJ12/RJ12 (~3 m)
• 1x USB cable (~3 m)
• 2x Wrench (13 mm)
• 1x Allen key (6 mm)
• 1x Allen key (4 mm)
• Rychlá příručka 1x
• 1x Sada samolepek

Nastavení

1. Připojení

The CSL Elite Pedals V2 can be connected to your system in two ways:

• Připojení RJ12: Connect directly to a compatible Fanatec Wheel Base using the provided RJ12 cable. This is the recommended connection method for full ecosystem integration.
• USB připojení: For PC users, the pedals can be used as a standalone USB input device. Connect the pedals directly to your PC using the provided USB cable.

2. Montáž

The pedal set features additional bracing for stability. Ensure secure mounting to a rig or pedal plate. When mounting, it is crucial to use appropriate washers or spacers between the pedal base and the mounting plate to prevent damage. Tightening without these can stress the base.

Image: Close-up of the pedal base, highlighting mounting points.

3. Pedal Position Adjustment

The position of each pedal (clutch, brake, throttle) can be adjusted sideways along the heel rest to suit individual preferences. The pedal set can also be configured as a two-pedal set if the clutch is not required.

Obrázek: Nahoře view of the 3-pedal set, illustrating adjustable pedal positions.

Návod k obsluze

1. Hall-Effect Sensors (Throttle and Clutch)

The throttle and clutch pedals utilize contactless Hall-effect sensors. These sensors measure pedal position using magnets, ensuring high precision and durability without mechanical wear.

Image: Detail of a Hall-effect sensor on a pedal.

2. Load Cell Brake System

The brake pedal features an all-new load cell sensor, capable of measuring up to 90 kg of foot force on the pedal plate (sensor rated for over 200 kg). This system measures pressure rather than position, providing a realistic braking feel.

Image: Close-up of the load cell brake system.

3. Adjustable Brake System

The brake pedal's feel can be customized using the included elastomer springs (65, 75, and 85 Shore hardness) and an alternative metal spring for stiffer preload. These adjustments are tool-free.

Image: Detail of the adjustable brake elastomer stack.

Brake sensitivity can be adjusted through the Fanatec Tuning Menu, accessible via your Fanatec Wheel Base or PC software.

Údržba

To ensure the longevity and optimal performance of your Fanatec CSL Elite Pedals V2, follow these general maintenance guidelines:

• Čištění: Regularly wipe down the pedals and base with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Inspekce: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou bezpečně utažené.
• Skladování: When not in use for extended periods, store the pedals in a clean, dry environment away from direct sunlight and extreme temperatures.

Odstraňování problémů

1. Brake Force Setting Resets

If the brake force setting occasionally resets to the default 50% upon turning on your Fanatec Wheel Base, ensure you re-adjust it via the Fanatec Tuning Menu or directly through your steering wheel before starting a race. Once corrected, the setting should remain stable until the next power cycle where the issue might reoccur.

2. Mounting Plate Damage

To prevent potential damage to the pedal base when mounting, ensure that appropriate washers or spacers are used between the pedal base and your mounting plate. Omission of these can lead to stress and breakage if tightened excessively.

3. Aktualizace firmwaru

For optimal performance and compatibility, ensure your pedals have the latest firmware. Firmware updates typically require connecting the pedal set directly to a PC via USB. Refer to the official Fanatec support webstránky s nejnovějším firmwarem a pokyny k aktualizaci.

Specifikace

Záruka a podpora

For warranty information, technical support, or further assistance, please visit the official Fanatec support website or contact Fanatec customer service directly. Keep your proof of purchase for warranty claims.

Official Fanatec Webmísto: fanatec.com