1. Úvod
Welcome to the comprehensive user manual for your Anern 12.8V 200Ah LiFePO4 Lithium Battery. This document provides essential information regarding the safe handling, installation, operation, and maintenance of your battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
This battery is specifically designed for energy storage applications, including residential solar systems, recreational vehicle (RV) and marine power, and various off-grid installations. Its advanced LiFePO4 chemistry offers superior safety, efficiency, and a long cycle life.
2. Bezpečnostní informace
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k požáru, úrazu elektrickým proudem, zranění nebo poškození baterie a dalšího majetku.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and insulated gloves, when handling batteries.
- Nezkratujte svorky baterie. Může to způsobit vážné poškození baterie a představovat nebezpečí požáru.
- Nevystavujte baterii ohni, nadměrnému teplu ani přímému slunečnímu záření po delší dobu.
- Neponořujte baterii do vody nebo jiných kapalin.
- Udržujte baterii mimo dosah dětí a domácích zvířat.
- Při nabíjení nebo vybíjení baterie zajistěte dostatečné větrání.
- This 12.8V 200Ah lithium battery is designed for energy storage applications (e.g., solar systems, RV power, backup energy solutions). It is nedoporučuje se for use as a starter battery for vehicles or high-cranking power equipment.
- Do not attempt to open, disassemble, or modify the battery. There are no user-serviceable parts inside.
- In case of battery leakage, contact with skin or eyes, flush immediately with plenty of water and seek medical attention.
3. Vlastnosti produktu
The Anern 12.8V 200Ah LiFePO4 Lithium Battery incorporates advanced technology to provide reliable and long-lasting power.
- Eco-Friendly & Safe LiFePO4 Chemistry: Utilizes lithium iron phosphate, eliminating toxic lead/acid components and offering superior thermal stability for a safe, environmentally responsible power solution.
- Prodloužená životnost: Engineered for maximum durability, delivering over 15,000 charge cycles, significantly outperforming traditional lead-acid batteries. This ensures decades of maintenance-free power with minimal capacity degradation.
- Integrovaný systém správy baterií 200A (BMS): An advanced BMS provides comprehensive safeguards, including instant 200A overcurrent cutoff, cell voltage balancing, and temperature monitoring. This extends battery lifespan and prevents dangerous overloads.
- Kompaktní a lehký design: Measuring approximately 20.47 × 8.54 × 8.86 inches (520 × 217 × 225 mm) and weighing 48.5 lbs (22 kg), this battery offers a 30% higher energy density than conventional models. Its space-optimized design is ideal for tight installations in RVs, marine vessels, and solar cabinets.
Obrázek: Přední strana view of the Anern 12.8V 200Ah LiFePO4 Lithium Battery, displaying its model number, voltage, capacity, and key specifications on a label.
Image: Diagram highlighting the battery's 10-year lifespan, lighter weight, and BMS protection features including overcharge, overload, overcurrent, short-circuit, and high-temperature shutdown.
Image: A visual comparison demonstrating that the Anern LiFePO4 battery is significantly lighter and smaller than a traditional AGM battery of similar capacity.
4. Nastavení a instalace
Proper setup and installation are crucial for the safe and efficient operation of your Anern LiFePO4 battery.
4.1 Prvotní kontrola
Upon receiving your battery, inspect it for any signs of physical damage. If damage is found, do not proceed with installation and contact customer support immediately.
4.2 Pokyny pro připojení
- Ujistěte se, že všechna připojení jsou bezpečná a řádně izolovaná, aby se zabránilo zkratu.
- Use appropriate gauge cables for your application to handle the expected current.
- Connect the battery to a compatible charge controller (e.g., MPPT solar controller) and inverter for solar energy systems.
- Observe correct polarity (+ to + and - to -) when making connections. Reversing polarity can cause severe damage.
4.3 Rozšíření kapacity
The Anern 12.8V 200Ah LiFePO4 battery supports connection of up to 4 units for capacity expansion. This allows for the creation of a 51.2V 800Ah battery system, providing up to 40.96 kWh of energy and supporting a maximum 800A continuous charging/discharging current and 40.96 kW load power.
Image: An illustration of a solar power system, demonstrating how multiple Anern batteries can be connected in series and parallel to a solar module, MPPT solar controller, and solar inverter to power various appliances.
Obrázek: Boční view of the Anern 12.8V 200Ah LiFePO4 Lithium Battery, indicating its dimensions (520mm length, 217mm width, 225mm height) and terminal specifications.
5. Návod k obsluze
The Anern LiFePO4 battery is designed for deep cycle applications, providing stable and consistent power for various uses.
5.1 Doporučené aplikace
This battery is ideal for:
- Systémy pro skladování solární energie
- Napájecí systémy mimo síť
- Rekreační vozidla (RV) a Campers
- Marine Applications (e.g., Trolling Motors)
- Záložní napájení pro domácnosti
- Surveillance and Security Systems
Image: An Anern battery placed outside a motorhome, illustrating its use for providing electricity during extended trips.
Image: A collage depicting various suitable applications for the Anern battery, including solar systems, battery backup systems, caravans, trolling motors, and monitoring/security systems.
5.2 Poznámky k použití
The LiFePO4 battery may exhibit a 1-5% voltage/current variance across different measurement conditions. This is normal and does not indicate a defect. For optimal performance, ensure the battery is used exclusively for energy storage applications as intended.
6. Údržba
The Anern LiFePO4 battery is largely maintenance-free due to its robust design and integrated BMS. However, following these guidelines will help ensure its long lifespan:
- Skladování: If storing the battery for extended periods, maintain bi-annual charge cycles. This helps preserve cell health and prevents deep discharge.
- Čištění: Periodically inspect and clean the battery terminals to ensure good electrical contact and prevent corrosion. Use a dry cloth for cleaning.
- Teplota: Operate and store the battery within its specified temperature ranges to maximize performance and lifespan.
7. Řešení problémů
Should you encounter any issues with your Anern LiFePO4 battery, consider the following basic troubleshooting steps:
- Žádný výkon: Check all cable connections for tightness and correct polarity. Verify that the battery's BMS has not triggered a protection mode (e.g., due to over-discharge, over-current, or extreme temperature). Allow the battery to rest or connect to a charger if deeply discharged.
- Problémy s nabíjením: Ensure your charger is compatible with LiFePO4 batteries and is functioning correctly. Check charger connections and input power.
- Neobvyklé pachy nebo zvuky: Immediately disconnect the battery from all loads and charging sources. Contact customer support.
For more complex issues or if basic troubleshooting does not resolve the problem, please refer to the Warranty and Support section for assistance.
8. Specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | 12.8V 200Ah LiFePO4 lithiová baterie |
| Jmenovitý svtage | 12.8 voltů |
| Nominální kapacita | 200Ah |
| Skladování energie | 2560 Wh |
| Hmotnost položky | 22 libry (9.98 kg) |
| Rozměry balení | 12.5 x 8.5 x 6.5 palce (31.75 x 21.59 x 16.51 cm) |
| Doporučená použití | Off-Grid Camping, Solar Energy Storage, Trolling Motor, RV |
| Znovupoužitelnost | Dobíjecí |
| Výrobce | Anern |
| Co je v krabici | 12.8V 200Ah LiFePO4 Lithium Battery x 1 |
9. Záruka a podpora
Anern is committed to providing high-quality products and excellent customer service. Your Anern 12.8V 200Ah LiFePO4 Lithium Battery comes with dedicated support to ensure your satisfaction.
Anern provides professional technical support and customer service, guaranteeing a fast response within 24 hours. Our expert team offers troubleshooting assistance, product optimization guidance, and lifetime maintenance advice to ensure your complete satisfaction. For any inquiries or support needs, please contact Anern customer service through the official channels.
