1. Úvod
The M-VAVE MS1 Wireless MIDI Transmission System is designed to provide a cable-free MIDI experience for musicians and producers. This system offers ultra-low latency and stable connectivity, allowing for seamless integration with various MIDI instruments and devices across different operating systems. This manual will guide you through the setup, operation, and maintenance of your MS1 system.
2. Konec produktuview
2.1 Obsah balení
The M-VAVE MS1 Wireless MIDI System includes the following components:
- 1 x MIDI A unit (5-PIN DIN IN/OUT)
- 1 x MIDI B unit (USB-A)
- 1 x USB nabíjecí kabel typu C
- 1 x Uživatelská příručka (tento dokument)
Image: Components of the M-VAVE MS1 Wireless MIDI System, showing MIDI A, MIDI B, and the charging cable.
2.2 Rozměry a hmotnost produktu
Refer to the image below for detailed dimensions of the MIDI A and MIDI B units.
Image: Detailed dimensions of the MIDI A (IN and OUT) and MIDI B units.
3. Nastavení a připojení
The M-VAVE MS1 system consists of two main units: MIDI A (for 5-PIN DIN MIDI ports) and MIDI B (for USB connections). Follow these steps to set up your wireless MIDI system.
3.1 Charging MIDI A Unit
The MIDI A unit contains a built-in rechargeable battery. Before first use, ensure it is fully charged using the provided USB Type-C cable. A full charge provides approximately 48 hours of continuous use.
3.2 Connecting MIDI A to a MIDI Instrument (5-PIN DIN)
The MIDI A unit connects to electronic musical instruments with standard 5-PIN DIN MIDI IN and MIDI OUT jacks.
- Turn on the MIDI A unit using its switch. The indicator light will flash if not yet paired.
- Connect the MIDI A 'OUT' plug to the MIDI 'OUT' port of your electronic musical instrument.
- Connect the MIDI A 'IN' plug to the MIDI 'IN' port of your electronic musical instrument.
Image: Illustration of connecting the MIDI A unit to the MIDI IN and MIDI OUT ports of a musical instrument.
3.3 Connecting MIDI B to a Computer/Device (USB)
The MIDI B unit connects to your computer or other devices via a USB port. It can also be powered directly from a USB power source.
- Insert the MIDI B unit into an available USB port on your computer (Mac, iOS, Windows) or a USB hub.
- For iOS/iPad, an adapter may be required to connect the USB-A MIDI B unit.
Image: Connecting the MIDI B unit to a USB port, demonstrating use with an adapter for iOS/iPad.
3.4 Pairing and Status Indicators
Once both MIDI A and MIDI B units are powered on and connected to their respective devices, they will automatically attempt to pair. The indicator light on MIDI A will flash during pairing and remain solid when successfully paired.
For a visual guide on the connection process, please refer to the official tutorial video below:
Video: Official tutorial demonstrating the unboxing and connection process for the M-VAVE MS1 Wireless MIDI System.
4. Provoz
The M-VAVE MS1 Wireless MIDI System provides a stable and low-latency connection for your MIDI devices.
4.1 Wireless MIDI Transmission
After successful pairing, MIDI data will be transmitted wirelessly between your MIDI instrument (connected to MIDI A) and your computer/device (connected to MIDI B). The system is designed for ultra-low latency, ensuring real-time performance.
Image: The MIDI A and MIDI B units connected to a MIDI device and a computer, illustrating a multi-function setup.
4.2 Compatible Devices and Software
The MS1 system is compatible with a wide range of devices and operating systems:
- Mac & iOS: Pair manually.
- Windows 10: Requires Korg BLE MIDI Driver for full functionality.
- Android: Works via Bluetooth MIDI integrated applications.
- Other WIDI devices and standard BLE MIDI Controllers: Automatic pairing.
- DIN-5 MIDI Devices & Instruments: Requires MIDI power via 5-PIN DIN MIDI Out.
It supports common Digital Audio Workstations (DAWs) for recording and music production.
Image: The MIDI A unit highlighting its efficient, zero-delay transmission capabilities.
5. Údržba
To ensure the longevity and optimal performance of your M-VAVE MS1 Wireless MIDI System, follow these maintenance guidelines:
- Čištění: K čištění jednotek používejte měkký, suchý hadřík. Nepoužívejte agresivní chemikálie ani abrazivní materiály.
- Skladování: Jednotky skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
- Péče o baterii (MIDI A): Recharge the MIDI A unit regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
- Správa kabelů: Ensure the charging cable is not kinked or strained.
6. Řešení problémů
If you encounter issues with your M-VAVE MS1 Wireless MIDI System, please refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| MIDI A indicator light flashes continuously. | Units are not paired or connection is lost. | Ensure both MIDI A and MIDI B are powered on and within range. Restart both units. Check connections to MIDI instrument and computer. |
| No MIDI signal received by computer/DAW. | Incorrect driver, software settings, or connection. | For Windows 10, install the Korg BLE MIDI Driver. Verify MIDI input settings in your DAW. Ensure MIDI A and MIDI B are successfully paired (solid light). Check physical connections. |
| Notes are sticking or not sending reliably. | Interference, low battery, or firmware issue. | Ensure MIDI A is fully charged. Minimize wireless interference from other devices. Check for firmware updates from the official M-VAVE webmísto. |
| MIDI B not recognized by computer. | Faulty USB port or driver issue. | Try a different USB port. Reinstall necessary drivers (e.g., Korg BLE MIDI Driver for Windows). Test MIDI B on another computer if possible. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.
7. Specifikace
| Funkce | Detail |
|---|---|
| Provozní pásmo | 2.4 GHz |
| Latence | <3 ms |
| Rozsah | <10m transmission distance |
| Power Requirement (MIDI A) | Built-in lithium battery, charged via USB cable |
| Battery Capacity (MIDI A) | 240 XNUMX mAh |
| Nominální objem baterietage (MIDI A) | 3.7V |
| Battery Life (MIDI A) | Až 48 hodin |
| Nabíjecí zařízení | USB nabíjecí kabel |
| MIDI A OUT Single Body Size | 24 (L) X50 (W) X80 (H) mm |
| MIDI A IN Single Body Size | 30 (L) X20 (W) X18 (H) mm |
| MIDI B Single Body Size | 48 (L) X20 (W) X10 (H) mm |
| Velikost balení | 95 (L) X65 (W) X31 (H) mm |
| Čistá hmotnost | 32 g |
| Hrubá hmotnost | 63 g |
| Kompatibilní zařízení | iOS, macOS, Windows 10 (with Korg BLE MIDI Driver), Android (via Bluetooth MIDI apps), other WIDI devices, standard BLE MIDI Controllers, DIN-5 MIDI Devices |
| Technologie připojení | USB, Bluetooth |
| Počet kanálů | 1 |
8. Záruka a podpora
8.1 Informace o záruce
The M-VAVE MS1 Wireless MIDI System comes with a jednoletá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a zajišťuje, že výrobek bude při běžném používání fungovat dle určení.
8.2 Zákaznická podpora
For any questions, technical assistance, or warranty claims, please contact the seller, sincoaudio, directly. You can typically find a 'Contact Seller' or 'Ask a Question' option on the product's purchase page or through your order history.
Note: Amazon return windows may close after one month. For product-related issues beyond this period but within the warranty, please contact the seller directly.
