Vente-unique Pascal MORABITO FRALYN Wall-Mounted Dressing Table with Mirror and LEDs

1. Úvod

Thank you for choosing the Vente-unique Pascal MORABITO FRALYN Wall-Mounted Dressing Table. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Obrázek 1.1: Konecview of the FRALYN Wall-Mounted Dressing Table and Mirror.

2. Bezpečnostní informace

• Vždy přesně dodržujte montážní pokyny. Nesprávná montáž může vést k nestabilitě a zranění.
• Ensure the wall you intend to mount the dressing table on is structurally sound and capable of supporting the weight (approximately 36.85 kg) plus any items placed on it. Use appropriate wall anchors for your wall type (e.g., concrete, drywall, studs).
• Udržujte malé části a obalové materiály mimo dosah dětí, abyste předešli nebezpečí udušení.
• Do not overload the drawers or the surface of the dressing table. The maximum supported load is 20 kg.
• Exercise caution when handling the mirror to avoid breakage and injury.
• Disconnect power before performing any maintenance on the LED lighting system.

3. Obsah balení

Před montáží ověřte, zda jsou všechny níže uvedené komponenty přítomny a nepoškozené. Pokud některé komponenty chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Dressing table unit (MDF and particle board, melamine finish)
• Mirror with integrated LEDs
• Two (2) sliding drawers
• Assembly hardware (screws, dowels, brackets, etc.)
• Wall mounting hardware (specific to wall type may need to be purchased separately)
• Návod k použití

4. Nastavení a instalace

This dressing table requires self-assembly and wall mounting. Two people are recommended for safe assembly and installation.

4.1. Montážní kroky

1. Vybalte všechny součásti a rozložte je na čistý, měkký povrch, abyste zabránili poškrábání.
2. Follow the detailed assembly diagrams provided in the separate assembly guide (if included) or the visual instructions below to construct the main dressing table unit.
3. Assemble the two drawers, ensuring the sliding mechanisms are correctly installed.
4. Attach the drawer slides to the main unit.

4.2. Montáž na zeď

1. Determine the desired height for your dressing table. Ensure it is comfortable for use while seated.
2. Mark the drilling points on the wall according to the mounting bracket positions on the back of the dressing table unit. Use a level to ensure accuracy.
3. Drill pilot holes at the marked points. Use appropriate drill bits for your wall material.
4. Insert suitable wall anchors into the drilled holes.
5. Secure the mounting brackets to the wall using the provided screws or appropriate wall screws.
6. Carefully lift the assembled dressing table unit and hook it onto the wall-mounted brackets. Ensure it is securely seated and level.
7. Mount the mirror above the dressing table unit. Connect the LED power cable to a suitable power source.

Image 4.1: Assembly diagram showing dimensions and drawer structure.

5. Návod k obsluze

5.1. Používání zásuvek

The FRALYN dressing table features two spacious sliding drawers. To open, gently pull the handle. To close, push the drawer back until it is fully recessed. Avoid forcing the drawers, especially if they feel stiff, and ensure no objects obstruct their movement.

Image 5.1: The dressing table with drawers open, illustrating storage capacity.

5.2. LED osvětlení

The mirror is equipped with integrated white LED lighting. Connect the power cable to an electrical outlet. The LEDs are typically controlled by a switch located on the mirror frame or power cable. Refer to the specific LED unit instructions for detailed operation if a separate guide is provided.

Image 5.2: The dressing table with its LED mirror illuminated, enhancing the room's ambiance.

6. Údržba

6.1. Čištění

• For the melamine-finished surfaces, wipe with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit povrchovou úpravu.
• For the mirror, use a standard glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
• Pravidelně otírejte prach ze všech povrchů, abyste zabránili hromadění nečistot.

6.2. Obecná péče

• Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Avoid exposing the dressing table to direct sunlight or extreme temperature changes, which can cause warping or discoloration.
• Nepokládejte horké předměty přímo na povrch bez ochrany.

7. Řešení problémů

• Drawers are stiff or not sliding smoothly: Check for obstructions in the drawer slides. Ensure the slides are properly aligned and lubricated if necessary. Verify that the assembly screws are not overtightened, causing distortion.
• LEDs are not working: Ensure the power cable is securely plugged into a working electrical outlet. Check the switch for the LEDs. If the issue persists, consult a qualified electrician.
• Dressing table feels unstable after mounting: Recheck all wall mounting points and ensure appropriate anchors were used for your wall type. If unsure, consult a professional for secure installation.
• Scratches or minor damage to surface: For minor scratches, furniture repair pens or touch-up kits designed for melamine finishes may be used.

8. Specifikace

9. Záruka a podpora

For information regarding warranty coverage, please refer to the purchase documentation or contact your retailer. For technical assistance, missing parts, or any other inquiries, please contact Vente-unique customer support through their official website or the contact details provided at the point of purchase.