1. Úvod
The WUBEN PL01 is a compact, high-performance pen light designed for various applications including home use, outdoor activities, emergencies, and inspections. It features a bright 650-lumen output, dual power options (rechargeable battery or AAA batteries), IP68 waterproof rating, and a durable aluminum alloy construction. This manual provides detailed instructions for its safe and effective use.

Image 1.1: The WUBEN PL01 Pen Light, showcasinjeho elegantním designem a kompaktní velikostí.
2. Co je v krabici
Please verify that all items are present upon opening the package:
- WUBEN PL01 Pen Light x 1
- Rechargeable Battery (pre-installed or separate) x 1
- Nabíjecí kabel typu C x 1
- Šňůrka na krk x 1
- Spare O-rings x 2
- Uživatelská příručka (tento dokument) x 1

Image 2.1: Contents of the WUBEN PL01 package, including the pen light, charging cable, lanyard, and spare O-rings.
3. Nastavení
3.1 Instalace baterie
The WUBEN PL01 supports two power sources: the included rechargeable battery or two standard AAA batteries (not included). Ensure correct polarity during installation.
- Odšroubujte koncovku svítilny.
- Insert the rechargeable battery or two AAA batteries with the positive (+) end facing towards the head of the flashlight.
- Securely re-screw the tail cap until it is fully tightened.

Image 3.1: Illustration of the dual power options for the WUBEN PL01, showing both the rechargeable battery and AAA battery configuration.
3.2 Nabíjení dobíjecí baterie
The included rechargeable battery features a built-in USB-C charging port. The flashlight itself does not have an integrated charging port.
- Unscrew the tail cap and remove the rechargeable battery from the flashlight.
- Connect the provided USB-C charging cable directly to the charging port on the battery.
- Připojte druhý konec kabelu USB-C ke kompatibilnímu zdroji napájení USB (např. síťový adaptér, USB port počítače).
- A red indicator light on the battery signifies that it is charging.
- Jakmile je baterie plně nabitá, kontrolka se rozsvítí zeleně.
- Nabíjení obvykle trvá přibližně 1.5 hodiny.
- Once charged, reinsert the battery into the flashlight and secure the tail cap.
4. Návod k obsluze
4.1 Zapnutí/vypnutí
To turn the WUBEN PL01 on or off, perform a full press of the tail switch button.
4.2 Přepínání režimů
With the light turned on, half-press the tail switch button to cycle through the available brightness modes in the following sequence:
- Měsíc: 1 lumenů
- Nízký: 50 XNUMX lumenů
- Střední: 150 XNUMX lumenů
- Vysoký: 650 XNUMX lumenů
The flashlight features a mode memory function, meaning it will activate in the last used brightness mode when turned on again.

Image 4.1: Diagram illustrating the tail switch operation for power on/off and mode cycling.

Obrázek 4.2: Příkladamples of the WUBEN PL01's four brightness modes in various practical scenarios, from facial examination to night walking.
4.3 Dual-Direction Clip Usage
The WUBEN PL01 is equipped with a versatile two-way clip, allowing for secure attachment to various items for hands-free lighting.
- Nošení v kapse: Attach the clip to a shirt pocket or pants pocket for easy access.
- Popruh na batoh: Secure the flashlight to a backpack strap for illumination during hikes or walks.
- Cap Mount: Clip the flashlight to the brim of a cap to convert it into a temporary headlamp.

Image 4.3: Demonstrates the versatility of the dual-direction clip, showing the flashlight attached to a pocket, backpack strap, and cap.
5. Údržba
5.1 Čištění
Pro udržení optimálního výkonu a vzhledu:
- Očistěte tělo svítilny měkkým hadříkemamp hadříkem. Vyhněte se agresivním chemikáliím nebo abrazivním materiálům.
- For the lens, use a clean, soft cloth specifically designed for optical surfaces.
5.2 O-ring Replacement
The PL01's IP68 waterproof rating relies on properly sealed O-rings. Periodically inspect them for any signs of wear, cracks, or damage.
- If O-rings appear damaged, replace them with the provided spare O-rings.
- Apply a thin layer of silicone grease to the O-rings to ensure a better seal and prevent drying.
5.3 Péče o baterii
- If the flashlight will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
- For the rechargeable battery, recharge it every 3-6 months to maintain its overall lifespan and capacity.

Image 5.1: The WUBEN PL01's Type III hard-anodized aluminum body, highlighting its scratch, rust, and impact resistance.

Image 5.2: The WUBEN PL01 demonstrating its IP68 waterproof and 2-meter impact resistance, suitable for demanding environments.
6. Řešení problémů
If you encounter issues with your WUBEN PL01, please refer to the following common problems and solutions:
- Světlo se nerozsvítí:
- Ensure the batteries are installed with correct polarity.
- Check if the rechargeable battery is charged, or if AAA batteries are new.
- Verify that the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
- Clean the battery contacts and the contact points inside the flashlight with a clean cloth.
- Světlo nečekaně bliká nebo ztlumuje:
- The battery level may be low. Recharge the included battery or replace AAA batteries.
- Ujistěte se, že je zadní víčko bezpečně utažené.
- Clean battery contacts and internal contact points.
- Water ingress (if exposed to water):
- Immediately turn off the flashlight and remove the batteries.
- Inspect the O-rings for any damage, tears, or improper seating. Replace if necessary.
- Ensure the tail cap was fully tightened before exposure to water.
- Allow the flashlight to dry completely before reassembling and attempting to use it.
If the problem persists after attempting these solutions, please contact WUBEN customer support.
7. Specifikace
| Funkce | Detail |
|---|---|
| Model | PL01 |
| Výstupní režimy | High (650 Lumens), Medium (150 Lumens), Low (50 Lumens), Moon (1 Lumen) |
| Doba běhu | High: 1 hour, Medium: 2.5 hours, Low: 7 hours, Moon: 125 hours |
| Typ baterie | Rechargeable (Included) / 2 x AAA Battery (Not Included) |
| Vzdálenost paprsku | 110 metrů |
| Špičková intenzita paprsku | 3000 CD |
| LED | 1 x 315 D |
| Hodnocení voděodolnosti | IP68 (Submersible in 2m water for 1 hour) |
| Odolnost proti nárazu | 2 metrů |
| Hmotnost | 1.59 oz (s baterií) |
| Rozměry (D x H) | 5.31 palce x 0.59 palců |
| Materiál | Eloxovaný hliník |
| Teplota barev | 5000 Kelvinů |

Image 7.1: Diagram illustrating the internal components of the WUBEN PL01, focusing on the 315D LED emitter and optical system.
8. Informace o záruce
WUBEN products typically come with a manufacturer's warranty. For specific warranty terms, conditions, and registration details, please refer to the official WUBEN webwebu nebo kontaktujte jejich zákaznickou podporu. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.
9. Zákaznická podpora
For further assistance, product inquiries, or technical support, please visit the official WUBEN website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their webmísto.
Official WUBEN Store: Obchod WUBEN na Amazonu





