Zavedení
This manual provides essential instructions for the safe and proper use, installation, and maintenance of your Evenflo LiteMax 30 Infant Car Seat. Please read all instructions carefully before using the product and retain this manual for future reference. The Evenflo LiteMax 30 Infant Car Seat is designed for infants weighing 3 to 30 lbs and meets or exceeds all applicable federal safety standards.
Vlastnosti produktu
- Hmotnostní rozsah: Accommodates infants from 3 to 30 lbs.
- Harness Positions: Features 4 shoulder harness positions to adapt as your child grows.
- Lehký design: Engineered for easy portability and maneuverability.
- Ergonomická rukojeť: Navrženo pro pohodlné nošení.
- Full Coverage Canopy: Provides protection from sun, wind, and rain.
- Easy-to-Install Base: Equipped with a vehicle belt lock-off for secure installation.
- Bezpečnostní normy: Meets or exceeds all applicable Federal Safety Standards, including structural integrity, rollover performance, and temperature testing.
Figure 1: Evenflo LiteMax 30 Infant Car Seat with its base.
Nastavení a instalace
Instalace základny autosedačky
- Umístěte základnu autosedačky na sedadlo vozidla v poloze proti směru jízdy.
- Protáhněte pánevní a ramenní pás vozidla vyznačenou dráhou pásu na základně.
- Engage the vehicle belt lock-off mechanism to secure the base tightly.
- Verify the recline angle using the recline indicator on the base. The indicator should be within the green zone for the child's weight.
- Attach the infant car seat to the installed base, ensuring it clicks securely into place.
Car Seat Installation Without Base (Vehicle Belt Only)
The Evenflo LiteMax 30 can be installed without its base, using only the vehicle's seat belt. This is useful for travel or when transferring the car seat to another vehicle without a base.
- Place the infant car seat on the vehicle seat in the rear-facing position.
- Route the vehicle's lap and shoulder belt through the designated belt guides on the car seat shell.
- Buckle the vehicle seat belt and pull it tight to remove all slack.
- Ujistěte se, že je autosedačka bezpečně nainstalována a nepohybuje se v dráze pásu o více než jeden palec ze strany na stranu nebo zepředu dozadu.
Figure 2: Key features including harness adjustment and recline indicator.
Návod k obsluze
Zabezpečení vašeho dítěte
- Usaďte dítě do autosedačky zády opřenými o opěradlo sedadla.
- Přetáhněte popruhy bezpečnostního pásu přes ramena dítěte a mezi jeho nohy.
- Connect the two harness buckle tongues into the buckle.
- Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. Ensure you cannot pinch any slack at the shoulder.
- Umístěte hrudní klip do úrovně podpaží.
Nastavení postroje
The harness features 4 shoulder height positions. To adjust the harness height:
- Unbuckle the harness and remove the car seat from the base (if applicable).
- Locate the harness slots on the back of the car seat.
- Thread the harness straps through the appropriate slots so they are at or just below your child's shoulders when rear-facing.
- Re-thread the harness straps through the front of the seat and re-buckle.
Použití stříšky
The full-coverage canopy can be extended or retracted to shield your child from environmental elements. Simply pull the canopy forward or push it back as needed.
Figure 3: The car seat's full-coverage canopy provides shade and protection.
Údržba a čištění
Regular cleaning and maintenance ensure the longevity and safety of your car seat.
Čištění látky
- All fabric components are removable and machine washable.
- Refer to the care label on the fabric for specific washing instructions. Typically, machine wash cold on a delicate cycle and tumble dry low.
- Nepoužívejte bělidlo ani agresivní prací prostředky.
Cleaning the Harness and Buckle
- Otřete popruhy bezpečnostního pásu reklamouamp látku. Neperte v pračce ani neponořujte popruhy do vody, mohlo by to oslabit webbing.
- Clean the buckle by rinsing it under warm water. Do not use soaps or lubricants.
Cleaning the Shell and Base
- Plastové a kovové části otřete měkkým hadříkemamp hadříkem a jemným mýdlem.
- Allow all parts to air dry completely before reassembly or use.
Figure 4: The car seat's fabric is designed for easy removal and machine washing.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Autosedačka se po instalaci zdá být uvolněná. | Vehicle belt not tight enough or lock-off not engaged. | Re-install the car seat, ensuring the vehicle belt is pulled taut and the lock-off (if using the base) is fully engaged. Check for movement at the belt path. |
| Popruhy postroje se obtížně nastavují. | Harness may be twisted or adjustment mechanism is stiff. | Ensure harness straps are not twisted. Check the harness adjustment mechanism for any obstructions. Refer to the "Harness Adjustment" section. |
| Recline indicator is not in the green zone. | Incorrect recline angle for child's weight. | Adjust the recline angle of the base or car seat until the indicator shows green for your child's weight range. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | CS100112404 |
| Rozměry produktu | 28.5 x 19 x 24 palce (D x Š x V) |
| Hmotnost položky | 8.17 libry |
| Doporučená maximální hmotnost | 30 libry |
| Typ materiálu | 100% Polyester |
| Počet poloh pro sklápění | 4 |
| Orientace | Směrem dozadu |
| Typ postroje | 5-bodový |
| Typ instalace | Seat With Base (or vehicle belt only) |
| Barva | Knoxville Gray |
Figure 5: Product dimensions of the Evenflo LiteMax 30 Infant Car Seat.
Záruka a podpora
For warranty information, please refer to the documentation included with your product or visit the official Evenflo website. Evenflo offers customer support through their ParentLink Consumer Care Team, which can provide real-time assistance, including live video support with a certified car seat safety technician for proper vehicle installation.
Pro další pomoc prosím navštivte Evenflo Store on Amazon nebo jejich úředník webmísto.
