Návod k použití držáku cyklocomputeru GEOID BM05

1. Úvod

The GEOID BM05 Bike Computer Mount is designed to securely attach your cycling computer, action camera, and bike light to your bicycle's handlebars. Crafted from high-strength Nylon Plastic, this mount offers excellent shock resistance and durability while maintaining a lightweight profile. It is compatible with a wide range of bike computers and accessories, enhancing your cycling experience.

GEOID BM05 Bike Computer Mount with hex keys and an extra base

Figure 1: GEOID BM05 Bike Computer Mount and included accessories.

2. Obsah balení

Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:

Tělo držáku ×1
Základna cyklocomputeru kompatibilní s Wahoo ×1
GARMIN standard code table base ×1 (pre-installed on the mount body)
3mm imbusový klíč ×1
2mm imbusový klíč ×1

Contents of the GEOID BM05 package including the mount, two hex keys, and an extra computer base.

Figure 2: All components included in the BM05 package.

3. Specifikace

Jméno	Držák na cyklistický počítač
Model	BM05
Rozměry	1355647 mm (přibližně 5.3 x 2.2 x 1.85 palce)
Hmotnost	~44g (approx. 1.55 ounces)
Kompatibilní průměr řídítek	31.8 mm
Materiál	Nylon Plast
Kompatibilita	GEOID, Garmin, Wahoo, Bryton, Magene, Cycplus, CooSpo, XOSS bike computers; GoPro action cameras; Bike lights
Barva	Černý
Speciální funkce	Lightweight, Rust Resistant, Anti-slip Design

Note: All data are laboratory measurements; actual product may vary slightly.

4. Nastavení a instalace

Follow these steps to properly install the GEOID BM05 Bike Computer Mount on your bicycle's handlebars.

4.1 Připevnění držáku k řídítkům

Identify the optimal position on your 31.8mm diameter handlebar for the mount. Ensure it does not obstruct your view or interfere with other controls.
Loosen the screw on the handlebar clamp of the mount using the provided 3mm hex key.
Opatrně otevřete clamp and position it around your handlebar.
Zavřete třamp and align the mount. Ensure the thickened anti-slip rubber pads are properly seated to enhance grip and reduce vibration.
Tighten the screw with the 3mm hex key until the mount is secure and does not rotate freely. Do not overtighten.

GEOID BM05 Bike Computer Mount installed on a bicycle handlebar.

Figure 3: Mount securely attached to the handlebar.

4.2 Installing Bike Computer Base (if changing from Garmin to Wahoo)

The mount comes with a Garmin-compatible base pre-installed. If you use a Wahoo computer, you will need to swap the base.

Using the 2mm hex key, unscrew the two small screws holding the pre-installed Garmin base on the top of the mount body.
Remove the Garmin base.
Place the Wahoo-compatible base into position, aligning the screw holes.
Secure the Wahoo base with the two small screws using the 2mm hex key. Ensure it is firmly attached.

Close-up of the GEOID BM05 mount showing the computer base attachment point.

Figure 4: Detail of the computer base attachment.

5. Návod k obsluze

Once the mount is installed, you can attach your compatible devices.

5.1 Připojení cyklocomputeru

Align your bike computer with the corresponding base on the mount (Garmin, Wahoo, Bryton, Magene, Cycplus, CooSpo, XOSS). Gently push down and twist the computer clockwise until it clicks securely into place.

A bike computer mounted on the GEOID BM05, showing the anti-slip design.

Figure 5: Bike computer attached to the mount.

5.2 Attaching a GoPro Action Camera or Bike Light

The mount features an integrated bracket for GoPro action cameras and compatible bike lights. Slide your GoPro or light into the bracket from the front until it locks into place. Ensure it is firmly seated before riding.

Two images showing a GoPro action camera and a bike light attached to the underside of the GEOID BM05 mount.

Figure 6: Mount with attached GoPro action camera and bike light.

To remove, press the release tab (if present on your accessory) and slide the device out.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your GEOID BM05 Bike Computer Mount.

Čištění: Otřete držák reklamouamp hadříkem k odstranění nečistot a špíny. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
Inspekce: Periodically check all screws for tightness, especially the handlebar clamp screw and the computer base screws. Retighten if necessary using the appropriate hex key.
Skladování: If removing the mount for extended periods, store it in a clean, dry place away from direct sunlight and extreme temperatures.

7. Řešení problémů

If you encounter any issues with your GEOID BM05 Bike Computer Mount, refer to the following common problems and solutions:

Problém	Řešení
Mount is loose on the handlebar.	Ujistěte se, že řídítka jsouamp screw is tightened sufficiently with the 3mm hex key. Verify that the mount is positioned correctly on a 31.8mm handlebar.
Bike computer does not fit or is loose.	Confirm you are using the correct computer base (Garmin or Wahoo) for your device. Ensure the base is securely screwed onto the mount body using the 2mm hex key.
GoPro or bike light is not secure.	Ensure the accessory is fully slid into the integrated bracket until it locks. Check for any debris in the bracket that might prevent a secure fit.

8. Záruka a podpora

For any questions, concerns, or technical support regarding your GEOID BM05 Bike Computer Mount, please contact GEOID customer service through the retailer where you purchased the product or visit the official GEOID store on Amazon:

GEOID Official Amazon Store

Please retain your proof of purchase for warranty claims, if applicable.