Zavedení
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your SOOPYK Top Load Water Cooler Dispenser with Ice Maker. Please read this manual thoroughly before initial use and retain it for future reference.
Obrázek: Přední strana view of the SOOPYK Top Load Water Cooler Dispenser with a 5-gallon water bottle on top, showing the ice maker compartment open with ice cubes inside.
Bezpečnostní pokyny
VAROVÁNÍ: Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění, vždy dodržujte základní bezpečnostní opatření.
- Ensure the unit is placed on a stable, level surface away from direct sunlight and heat sources.
- Nepoužívejte dávkovač s poškozeným kabelem nebo zástrčkou.
- Keep the back of the dispenser at least 6 inches from a wall to allow for proper ventilation.
- Před čištěním nebo jakoukoli údržbou vždy odpojte přístroj ze zásuvky.
- The hot water spout is equipped with a child safety lock. Always engage this lock when not in use, especially in households with children.
Obrázek: Detail view of the child safety lock button located above the hot water dispensing lever.
Vlastnosti produktu
- 3 nastavení teploty: Provides hot, cold, and room temperature water to suit various needs.
- Built-in Ice Maker: Produces 9 bullet-shaped ice cubes in approximately 7-9 minutes, with a daily capacity of 27 lbs and an ice storage capacity of 5.3 lbs. Note: The unit does not keep ice frozen long-term.
- Funkce nočního světla: Illuminates the water spouts for clear visibility in low-light conditions and provides visual access to the drip tray.
- Dětská pojistka: Located on the hot water spout to prevent accidental burns.
- Auto Shut-Off System: Automatically stops ice making if water levels are insufficient or when the ice storage bin is full.
- Odolná konstrukce: Features a stainless steel weld tank for long-lasting performance and reliability.
Image: Visual representation of the 3-in-1 dispensing capabilities, including hot water, cold water, fresh water, and ice cubes.
Image: The water cooler dispenser in a dark room, demonstrating the blue nightlight illuminating the dispensing area.
Video: Overview of the SOOPYK 3-in-1 water cooler, showcasing its various features and functions.
Specifikace
| Atribut | Detail |
|---|---|
| Značka | SOOPYK |
| Číslo modelu | BYCZ581BK |
| Barva | Černý |
| Materiál | Akrylonitrilbutadienstyren (ABS) |
| Kapacita | 3 or 5 Gallons (water bottle) |
| Rozměry produktu | 14"H x 12"Š x 41"V |
| Typ instalace | Volné stání |
| Přístup k poloze | Horní zatížení |
| Hodnocení vyšší teploty | 210 Degrees Fahrenheit (Hot Water) |
| Nižší teplotní hodnocení | 40 Degrees Fahrenheit (Cold Water) |
| Zdroj napájení | Elektrický kabel |
| Hmotnost položky | 38 libry |
| Kapacita výroby ledu | 27 liber za 24 hodin |
| Kapacita úložiště ledu | 5.3 liber |
Image: Diagram illustrating the dimensions (height, width, depth) of the SOOPYK water cooler dispenser.
Nastavení
- Rozbalení: Opatrně vyjměte dávkovač z obalu. Zkontrolujte, zda není poškozen.
- Umístění: Place the unit on a firm, level surface. Ensure adequate ventilation by leaving at least 6 inches of space from walls and other objects. Avoid direct sunlight or heat sources.
- Počáteční čištění: Before first use, clean the water reservoir and ice maker compartment according to the "Maintenance" section.
- Instalace láhve na vodu:
- Remove the protective seal from a 3 or 5-gallon water bottle.
- Carefully invert the water bottle and place it onto the top loading seat of the dispenser. Ensure it is seated firmly and water begins to flow into the reservoir.
Obrázek: Detailní záběr view of the top-loading smart water barrel seat where the water bottle is placed.
- Připojení napájení: Zapojte napájecí kabel do uzemněné elektrické zásuvky.
- Initial Water Dispensing: Before turning on heating or cooling, dispense at least 1 liter of water from each spout (hot, cold, room temperature) to ensure the tanks are filled and to remove any air.
Návod k obsluze
Výdej vody
- Horká voda: Press and hold the child safety lock button, then press the hot water dispensing lever.
- Studená voda: Press the cold water dispensing lever.
- Teplota vody v místnosti: Press the room temperature water dispensing lever.
Ice Making Function
- Ensure the water bottle is properly installed and the unit is plugged in.
- Press the "Ice Making" button on the control panel to activate the ice maker. The indicator light will illuminate.
- Ice production will begin. The first batch of ice typically takes longer.
- The unit will automatically stop making ice when the ice bin is full. The "Ice Full" indicator will light up.
- To collect ice, open the ice maker compartment door and use a scoop (not included) to retrieve ice.
Obrázek: Podrobný view of the ice maker compartment, showing the ice full indicator and the "Recycle Ice" feature.
Video: A demonstration of the water dispenser with its ice maker function, showing the ice production process.
Údržba
Regular cleaning and maintenance will ensure the longevity and optimal performance of your water cooler dispenser.
Čištění exteriéru
- Vnější povrchy otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- The removable drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth.
Obrázek: Detailní záběr view of the drip water tray, indicating its removable design for easy cleaning.
Cleaning the Water Reservoir and Ice Maker
- Odpojte dávkovač ze zásuvky.
- Vyjměte láhev s vodou.
- Drain all water from the hot and cold tanks using the drain plugs located at the back of the unit.
- Clean the water reservoir and ice maker components with a mild, food-grade cleaning solution or a mixture of water and white vinegar.
- Důkladně několikrát opláchněte čistou vodou, abyste odstranili veškeré zbytky.
- Allow all parts to air dry completely before reassembling and refilling.
Image: The interior of the ice maker compartment, showing the ice collection bin and the ice-making mechanism.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný výdej vody. | Empty water bottle; airlock in system; unit unplugged. | Replace water bottle; dispense water from all spouts to clear air; check power connection. |
| Voda není dostatečně horká/studená. | Heating/cooling switch off; insufficient time to reach temperature; poor ventilation. | Ensure heating/cooling switches are on; allow 15-30 minutes for temperature stabilization; ensure proper clearance around the unit. |
| Výrobník ledu nevyrábí led. | No water; ice bin full; ice making function off; ambient temperature too high. | Ensure water bottle is full; empty ice bin; turn on ice making function; ensure unit is in a cool environment. |
| Únik vody. | Water bottle not seated correctly; drain plug loose; damaged component. | Re-seat water bottle; tighten drain plug; contact customer support if damage is suspected. |
Pokud problémy přetrvávají i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.
Záruka a podpora
Your SOOPYK Water Cooler Dispenser is backed by a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a vady zpracování při běžném používání.
Navíc a 30denní zásada vrácení is available for this product. Please refer to your purchase documentation for specific terms and conditions.
For technical assistance, warranty claims, or any other inquiries, please contact SOOPYK customer support through the retailer where the product was purchased or visit the official SOOPYK store online.
SOOPYK Store: Visit the SOOPYK Store on Amazon
