Příručky+

Veise VE017G-H

Návod k obsluze sady inteligentního zámku na dveře Veise VE017G-H s Wi-Fi čtečkou otisků prstů

1. Úvod a konecview

This manual provides detailed instructions for the installation, setup, and operation of your Veise VE017G-H Wi-Fi Smart Fingerprint Front Door Lock Set. This advanced lock offers multiple access methods and smart home integration for enhanced security and convenience.

Klíčové vlastnosti:

2. Co je zahrnuto

The Veise VE017G-H package includes the following components:

All components of the Veise VE017G-H smart lock set, including the exterior keypad, interior thumb-turn, handle, G1 gateway, keys, and IC cards.
Figure 1: All components included in the Veise VE017G-H Smart Lock Set.

3. Instalační příručka

3.1 Kontroly před instalací

Before beginning installation, verify your door's compatibility and dimensions:

Diagram showing door dimensions and hole requirements for the Veise smart lock installation.
Figure 2: Door dimensions and compatibility check before purchase.

Ensure your door is chiseled for the latch and strike plates. This lock is designed for single cylinder deadbolts and is not compatible with mortise/integrated locks.

Diagram illustrating compatible door types: chiseled and single cylinder, and incompatible mortise/integrated locks.
Figure 3: Compatible and incompatible door types for installation.

3.2 Postup instalace

It is strongly recommended to keep the door open or ajar during installation. Do not close the door before inserting the batteries. Do not insert the batteries until the lock is fully installed.

Video 1: Detailed guide on how to install the smart lock and handle sets.

  1. Nainstalujte Latch and Strike:
    • Adjust the latch backset (60mm or 70mm) if necessary.
    • Ensure the beveled edge of the latch bolt faces the direction the door swings shut.
    • Secure the latch with screws.
    • Nainstalujte zarážecí plech na rám dveří.
  2. Instalace vnější sestavy:
    • Veďte kabel pod západkou.
    • Insert the torque blade through the slot in the latch, ensuring it's horizontal.
    • Align the exterior assembly with the door holes and secure it.
  3. Instalace vnitřní sestavy:
    • Disassemble the battery cover.
    • Insert the cable connector into the socket, pushing firmly until seated.
    • Align the torque blade with the knob hole.
    • Attach the interior assembly to the mounting plate and tighten the 3 screws.
    • Insert 4 AA alkaline batteries (do not mix old and new batteries or different brands).
    • Připevněte kryt baterie.
  4. Install Handle Set:
    • Ensure the handle set is compatible with your door's 3-hole spacing (7-8/8" to 8-7/8").
    • Install the exterior handle, ensuring the handle button is not pressed during installation.
    • Namontujte vnitřní rukojeť.
    • Do not exert excessive force on the handle or hang objects on it.

4. App Setup & Connectivity

4.1 KK Home App Setup

The KK Home App allows full control and management of your smart lock.

Video 2: Instructions on how to pair the lock to the KKHome App and G1 Gateway.

  1. Download and Register: Download the KK Home App from your app store. Register and log in to your account.
  2. Povolit oprávnění: Turn on Bluetooth for iOS. For Android, turn on Location and Bluetooth, and grant location permission to the app. Keep your phone and lock within 2 meters during pairing.
  3. Přidat zařízení: Click "Add device" in the app. Scan the QR code or manually enter the ESN located on the back of the interior assembly. Follow in-app instructions to complete pairing.
  4. Změna hlavního kódu: After successful connection, tap on "Settings" then "Master code" to set a new 4-10 digit master PIN code.

4.2 G1 Gateway Pairing

The G1 Gateway enables Wi-Fi connectivity for your lock.

  1. Zapnutí: Plug in the G1 Gateway. Keep it within 15 meters (49ft) of your home router.
  2. Naskenujte QR kód: Open the KK Home App and scan the QR code on the G1 Gateway.
  3. Resetovat bránu: Find the RES button on the device, press and hold it for 5 seconds until the indicator starts to slowly flash.
  4. Wi-Fi připojení: Set up Wi-Fi connection. The gateway only works with 2.4G Wi-Fi networks. Click "next" to complete.
  5. Add Smart Lock: Add the smart lock in the App. Ensure the G1 gateway has been added successfully first. Keep the G1 gateway within 10 meters of the door lock.

4.3 Integrace hlasového ovládání

Integrate your smart lock with Amazon Alexa or Google Home for convenient voice commands.

Video 3: Guide on how to connect your Veise smart lock to Alexa.

After successfully connecting your G1 gateway and smart lock to the KK Home App, follow the in-app instructions to link your KK Home account with Alexa or Google Assistant. You can then use voice commands like "Alexa, unlock the front door" or "Alexa, lock the front door."

5. Návod k obsluze

5.1 Multiple Access Methods

Your Veise smart lock offers various ways to unlock and lock your door:

Image showing multiple quick entry methods for the Veise smart lock: 0.2s Fingerprint, PIN Code, Fob, Key, and Smart Voice.
Figure 4: Quick entry methods including fingerprint, PIN code, fob, key, and smart voice.

5.2 Funkce automatického zámku

The auto-lock feature automatically locks your door after a set period, providing peace of mind.

Image illustrating the auto-lock feature with adjustable timer settings from 10 seconds to 3 minutes.
Figure 5: Auto-lock feature with customizable timer settings.

5.3 Vzdálená správa

Manage your lock's access and monitor activity remotely through the KK Home App.

Image showing remote control features of the KK Home App, including password generation, user management, real-time notifications, and activity logs.
Figure 6: Remote control capabilities via the KK Home App.
Image demonstrating remote management of various access codes, including permanent, one-time, duration, and repeat codes, with sharing options.
Figure 7: Remote management of access codes and sharing options.

5.4 Bezpečnostní funkce

The lock incorporates several features to enhance security:

Image showing the anti-peeping passcode feature where random digits can be entered before or after the correct password.
Figure 8: Anti-peeping passcode for enhanced security.
Image depicting a lockout alarm notification on a smartphone after multiple incorrect entry attempts on the smart lock.
Figure 9: Lockout alarm notification for security breaches.

5.5 Speciální režimy

Image showing the Away mode feature enabled on a smartphone, with a person leaving their home.
Figure 10: Away mode activated for enhanced security when leaving home.
Image illustrating the backlit keypad with red, green, and blue indicators for fail, success, and active states, along with silent mode.
Figure 11: Backlit keypad and silent mode for convenient and discreet operation.

6. Údržba

6.1 Výměna baterie

The lock requires 4 AA alkaline batteries. Replace batteries when the low battery alarm is triggered.

Image showing a low battery alarm notification on a smartphone and the emergency Type-C port on the smart lock.
Figure 12: Low battery alarm and emergency Type-C port for temporary power.

6.2 Nouzové napájení

In case of complete battery depletion, an emergency Type-C port is available for temporary power to unlock the door.

7. Řešení problémů

If you encounter issues with your Veise smart lock, refer to the following common problems and solutions:

Video 4: Troubleshooting guide for the VE017G-H smart lock.

ProblémŘešení
The latch bolt keeps going in and out.Disassemble and reinstall the lock by following the installation tips:
  • Nevkládejte mechanický klíč do válce zámku před ani během instalace.
  • Udržujte západku zcela zataženou a krouticí čepel ve vodorovné poloze.
  • Make sure to route the cable below the Latch.
  • Vnější a vnitřní sestava by měla být instalována rovnoběžně s okrajem dveří.
Can only be unlocked with a key; password, fingerprint, and mobile app unlocking are unavailable.Press and hold the reset button with the reset tool for 5 seconds. The lock will resume normal operation after resetting.
Keeps showing stuck. Key/password/fingerprint/KK Home App can't be unlocked and locked.Veďte lanko pod západkou a vložte momentový čepel vodorovně do drážky západky a ujistěte se, že čepel i drážka jsou v rovině.
Connection failed during pairing or lock not found.Perform a resetting on the lock. Test if the default master code (12345678) works to unlock. Make sure Bluetooth is turned on in your phone's settings and the lock is supplied with power.
Hlavní PIN kód nelze změnit.Informace o resetování zámku a přeprogramování všech kódů PIN naleznete ve Stručném návodu k obsluze.
Forgot Master PIN Code.Perform a factory reset to clear all PIN Codes. Once reset, all PIN Codes will be deleted and the Master PIN Code will be reset to the default (12345678).
Auto Lock nefunguje.If the light continues to flash red and the voice announces "Low battery", replace the batteries with four new AA alkaline batteries. See Quick Setup to activate the auto-lock feature.
Fingerprint can't unlock.Vyčistěte snímač otisků prstů a zkuste to znovu.
Lock setup failed.Make sure the lock is installed correctly. Insert fresh batteries and make sure the cable is properly connected, not pinched. After installation, reset the lock to the factory default settings.
Klávesnice nereaguje.Make sure batteries are inserted correctly. If the battery indicator flashes continuously, the batteries are low. Replace them with four new AA alkaline batteries. Make sure that the cable is properly connected and has not been damaged during installation.

8. Specifikace

FunkceDetail
ZnačkaVeise
Název modeluVE017G-H
Typ zámkuBiometrický, Závora, Klávesnice
MateriálHliník
BarvaMatná černá
Typ dokončeníMatná černá
Rozměry položky D x Š x V12.83 x 9.29 x 3.74 palce
Hmotnost položky5.37 libry
Protokol připojeníBluetooth, 2.4 GHz Wi-Fi
Typ ovladačeAPP, Amazon Alexa, Google Assistant, Hand Control
Jsou vyžadovány baterie4 AA baterie (nejsou součástí balení)
Typ baterieAlkalický
Speciální funkceAuto-Lock, Back-Lit Keypad, Fingerprint, One-Touch Lock, Smart Lock with Retro Handle Set, Wi-Fi Remote Control, Remote Lock/Unlock, Remote Access Sharing, Real-time Notifications, Instant Access Log, Monitor Lock Status, Alexa and Google Voice Control, Remotely Generate/Modify/Delete Code, Voice Prompts in 3 Languages, US-Based Customer Support

9. Záruka a podpora

Veise offers comprehensive support for your product:

If you have any questions or require assistance, please contact us first!

Související dokumenty - VE017G-H

Předview Handleset Installation Instructions
Step-by-step guide for installing a handleset, including parts list, tool requirements, and detailed instructions for preparing the door, adjusting the backset, installing the latch and strike, and mounting the handleset and lever.
Předview Instalační manuál chytrého zámku Veise VE017
Komplexní instalační manuál pro inteligentní dveřní zámek Veise VE017, který zahrnuje přípravu, kroky instalace, postupy resetování, řešení problémů a bezpečnostní varování.
Předview Instalační manuál chytrého zámku Veise VE012W
Komplexní instalační manuál pro chytrý zámek Veise VE012W, který zahrnuje seznam dílů, podrobnou instalaci, řešení problémů a bezpečnostní informace. Naučte se, jak nainstalovat chytrý zámek bez klíče.
Předview Uživatelská příručka k chytrému zámku Veise VE017 – nastavení, průvodce aplikací a programování
Komplexní uživatelská příručka pro chytrý zámek Veise VE017. Zahrnuje instalaci, nastavení aplikace (KK Home), párování, postupy odemykání/zamykání, programovací průvodce, definice a často kladené otázky. Naučte se používat otisk prstu, klávesnici, uživatelské karty a funkce aplikace.
Předview Uživatelská příručka a pokyny k instalaci chytrého zámku Veise RZ06
Komplexní průvodce instalací a obsluhou chytrého zámku Veise RZ06, včetně funkcí, jako je bezklíčový vstup, ovládání aplikací, automatické zamykání a řešení problémů.
Předview Stručný návod k nastavení zámku bezklíčového vstupu Veise KS01/KS03/KS04
Stručný návod k nastavení a programování bezklíčového zámku dveří Veise KS01, KS03 nebo KS04, včetně změn hlavního kódu, správy uživatelských kódů, tichého režimu, automatického zamykání a režimu dovolené.