Uživatelská příručka k přenosnému detektoru amoniaku AOPUTTRIVER AP-535G

1. Úvod

This manual provides comprehensive instructions for the safe and effective use of the AOPUTTRIVER AP-535G Portable Ammonia Gas Detector. This device is designed to accurately measure ammonia (NH3) gas concentrations, ambient temperature, and relative humidity in various environments. Please read this manual thoroughly before operating the device to ensure proper function and safety.

Obrázek 1.1: Konecview of the AOPUTTRIVER AP-535G Ammonia Gas Detector highlighting its core functions: Ammonia Gas Monitor, Humidity, Temperature, Audible Alarm, C/F Selection.

2. Bezpečnostní informace

Observe the following safety precautions to prevent injury and avoid damage to the device:

• Do not attempt to open or modify the device. Internal components are not user-serviceable.
• Chraňte zařízení před vodou a jinými kapalinami, abyste předešli úrazu elektrickým proudem nebo poškození.
• Provozujte zařízení v rámci specifikovaných teplotních a vlhkostních rozsahů.
• Ensure the device is charged using the provided USB cable and a compatible power adapter.
• This device is for monitoring purposes only and should not be used as a substitute for professional safety equipment or procedures.
• Avoid exposing the sensor to extreme concentrations of gas, which may cause damage or inaccurate readings.

3. Konec produktuview

3.1 Obsah balení

• AOPUTTRIVER AP-535G Ammonia Gas Detector
• Nabíjecí kabel USB typu C.
• Uživatelská příručka

3.2 Klíčové vlastnosti

• Sensitive & High-Precision: Equipped with a professional electrochemical sensor for 0-100 ppm NH3 detection with +/-5% accuracy and 0.1ppm resolution. Response time is less than 120 seconds.
• Adjustable Alarm Settings: Features sound and light dual alarms with customizable alarm thresholds.
• Podsvícený LCD displej: A 4.3-inch backlit LCD provides clear readings in various lighting conditions.
• Humidity & Thermometer: Measures indoor temperature (-10-50°C, +/-2°C accuracy) and relative humidity (0-95%). Temperature units are switchable between Celsius and Fahrenheit.
• Všestranné umístění: Includes a hanging hole and a 180° bracket for desktop or wall mounting.

3.3 Rozvržení a zobrazení zařízení

Familiarize yourself with the device's display and button functions:

Obrázek 3.1: Detailní view of the AP-535G's display and control buttons, with numbered labels indicating specific functions.

4. Nastavení

4.1 Nabíjení zařízení

The AP-535G is equipped with a rechargeable battery. Before first use, or when the battery indicator shows low power, charge the device:

1. Connect the provided USB Type-C cable to the charging port on the side of the device.
2. Druhý konec kabelu USB připojte ke standardnímu napájecímu adaptéru USB (není součástí balení) nebo k portu USB počítače.
3. Indikátor baterie na displeji bude zobrazovat stav nabíjení. Úplné nabití obvykle trvá několik hodin.
4. Po úplném nabití odpojte nabíjecí kabel.

Image 4.1: The AP-535G device highlighting its USB Type-C charging port and overall dimensions.

4.2 Počáteční zapnutí

Zapnutí zařízení:

1. Press and hold the Power button (12) located at the bottom left of the device.
2. The LCD display will illuminate and begin a self-calibration process.
3. Allow the device to stabilize for approximately 120 seconds for accurate readings.

5. Provoz

5.1 Zapnutí/vypnutí

• Zapnutí: Press and hold the Power button (12) until the display turns on.
• Vypnout: Press and hold the Power button (12) until the display turns off.

5.2 Odečty naměřených hodnot

Once powered on and stabilized, the device will continuously display:

• Ammonia concentration in PPM (2).
• Relative humidity in %RH (11).
• Temperature in °C or °F (9).

5.3 Úprava nastavení alarmu

The device features two alarm levels (AL1 and AL2) that can be set to alert you when ammonia concentration exceeds a specified threshold. When an alarm is triggered, the device will emit a beep and flash its LED light.

Image 5.1: The AP-535G illustrating its sound and light dual alarm system, which activates when preset ammonia levels are exceeded.

1. Press the Mode button (14) to cycle through display modes until 'AL1' or 'AL2' appears.
2. While 'AL1' or 'AL2' is displayed, press the Alarm button (13) to enter setting mode. The current alarm value will flash.
3. Use the Mode button (14) to increase the value and the °C/°F button (15) to decrease the value.
4. Press the Alarm button (13) again to confirm the setting and exit.

5.4 Přepínání teplotních jednotek (°F/°C)

Přepínání mezi jednotkami teploty Celsia a Fahrenheita:

• Briefly press the °C/°F button (15). The temperature unit on the display will change accordingly.

5.5 ovládání podsvícení

The device features a backlight for improved visibility in low-light conditions.

• Briefly press the Alarm button (13) to toggle the backlight on or off.

Image 5.2: The AP-535G's 4.3-inch LCD display, demonstrating its backlight function for clear visibility in various lighting conditions.

6. Údržba

6.1 Čištění

Pro zachování výkonu a vzhledu zařízení:

• Vnější povrch zařízení otřete měkkým, suchým hadříkem.
• Do not use abrasive cleaners, solvents, or corrosive chemicals.
• Ensure no liquids enter the sensor openings or charging port.

6.2 Péče o baterii

• Charge the device regularly to prolong battery life.
• Vyhněte se častému úplnému vybíjení baterie.
• If storing the device for an extended period, charge it to approximately 50% and recharge every few months.

7. Řešení problémů

If you encounter issues with your AP-535G, refer to the following common problems and solutions:

8. Specifikace

Image 8.1: Technical parameters of the AP-535G Ammonia Gas Detector, including gas detection type, measuring range, resolution, and response time.

9. Záruka a podpora

AOPUTTRIVER products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official AOPUTTRIVER webUschovejte si účtenku jako doklad o koupi pro případ reklamace.