PetSafe Wireless Containment Fence for 2 Dogs User Manual

Zavedení

The PetSafe Wireless Containment System provides a secure, circular boundary for your pets without the need for buried wires or physical fencing. This system is designed for ease of setup and portability, making it suitable for various environments including your home yard, camping trips, or vacation homes. It includes a transmitter and two receiver collars, allowing you to manage up to two dogs with the initial kit. Additional collars can be purchased to accommodate more pets.

The system operates by creating an adjustable circular boundary, ranging from 5 to 90 feet in all directions from the base unit, covering up to 1/2 acre. The receiver collars provide a tone-only mode and 5 adjustable levels of static correction to gently guide your dog back into the safe play area. The collars are waterproof and designed for comfort for dogs 8 pounds and up, with neck sizes from 6 to 28 inches.

Obsah sady

Upon unboxing your PetSafe Wireless Containment Fence, verify that all components are present:

• Transmitter with power adaptor
• Two Receiver Collars with adjustable straps
• 50 tréninkových vlajek
• Testovací světelný nástroj
• Long Contact Points (pre-installed on collars, or as spares)
• Contact Point Wrench
• Produktový manuál

Obrázek: Overview of the PetSafe Wireless Containment Fence kit components.

Pokyny pro nastavení

Setting up your PetSafe Wireless Containment System is a straightforward process that typically takes 1-2 hours. Follow these steps to establish your pet's safe play area:

1. Umístění vysílače: Place the Wireless Containment System transmitter in a weatherproof location, ideally indoors, near a standard electrical outlet. The transmitter acts as the center of your pet's circular play area. Avoid placing it near large metal objects or appliances that could interfere with the signal.
2. Připojení napájení: Plug the transmitter's power adaptor into a wall outlet.
3. Adjusting Boundary Size: Use the dial on the transmitter to adjust the coverage area. The range can be personalized from 5 to 90 feet in all directions from the base unit, creating a circular boundary up to 180 feet across (1/2 acre).
4. Collar Preparation: Ensure the receiver collars are properly fitted to your dogs. The collar should be snug enough for the contact points to touch the dog's skin, but not so tight as to cause discomfort. Use the appropriate contact points (short or long) based on your dog's fur length.
5. Boundary Testing with Flags: Use the provided training flags to visually mark the boundary of the containment area. Walk the perimeter with a collar in hand to test the signal and ensure the boundary is where you intend it to be. The collar will emit a tone as you approach the boundary.

Image: Visual guide for setting up the system, highlighting the transmitter, collar, and flags.

For detailed setup and training instructions, refer to the full product manual included in your kit or visit the official PetSafe webstránky pro další zdroje: Podpora PetSafe.

Provoz systému

The PetSafe Wireless Containment System is designed for intuitive operation, providing a safe and effective way to keep your pets within a designated area.

Collar Features and Operation:

• Úrovně opravy: The receiver collar offers 5 adjustable levels of static correction, allowing you to customize the intensity based on your dog's temperament and training needs. There is also a tone-only training mode for initial training.
• Tone Alert: Before any static correction, the collar will emit an audible tone as your dog approaches the boundary, serving as a warning.
• Vodotěsný design: The collar is waterproof, ensuring durability and functionality even in wet conditions.
• Životnost baterie: The collar battery typically lasts up to 2 months. A low battery indicator will alert you when it's time for replacement. The system uses the PetSafe RFA-67D-11 battery.
• Bezstatický návrat: A key feature of this wireless fence is that it allows your pet to return to the safe area without receiving a correction if they pass the boundary.

Obrázek: Podrobný view of the PetSafe receiver collar and its key features.

Výcvik vašeho mazlíčka:

Effective training is crucial for your pet to understand the wireless boundary. Begin with the tone-only mode and gradually introduce static correction levels as needed. Consistent, short training sessions are recommended. The included training flags serve as visual cues during the initial learning phase.

Image: A dog within the marked boundary, illustrating the use of training flags.

Údržba

Proper maintenance ensures the longevity and effectiveness of your PetSafe Wireless Containment System.

Collar Battery Replacement:

The receiver collar uses a replaceable PetSafe RFA-67D-11 battery. When the low battery indicator on the collar illuminates, it's time to replace the battery. Use the contact point wrench to open the battery compartment, replace the old battery with a new one, and securely close the compartment.

Čištění:

Periodically clean the collar and contact points to ensure proper skin contact and prevent irritation. Use a damp cloth to wipe down the collar and contact points. Ensure the collar is dry before re-attaching it to your pet.

Transmitter Care:

Keep the transmitter in a dry, protected location. Avoid exposing it to extreme temperatures or moisture. Wipe it clean with a dry cloth as needed.

Odstraňování problémů

If you encounter issues with your PetSafe Wireless Containment System, consider the following common troubleshooting steps:

• No Signal/Inconsistent Boundary:
  • Check the transmitter's power connection and ensure it is turned on.
  • Verify that the boundary width control dial is set appropriately for your desired coverage area.
  • Relocate the transmitter if it is too close to large metal objects (e.g., metal sheds, vehicles, large appliances) that can interfere with the signal.
  • Ensure the collar battery is fresh and correctly installed.
• Collar Not Correcting:
  • Confirm the collar is powered on and the battery is not depleted.
  • Check that the contact points are making proper contact with your dog's skin. You may need to trim your dog's fur or use longer contact points.
  • Use the test light tool to verify the collar is functioning correctly when held at the boundary.
  • Adjust the correction level on the collar to a higher setting if your dog is not responding.
• Dog Not Responding to Training:
  • Revisit the training steps outlined in the product manual. Consistency and patience are key.
  • Ensure the training flags are clearly visible and used effectively to mark the boundary during training sessions.
  • Consider consulting a professional dog trainer if difficulties persist.

Always refer to the complete troubleshooting guide in your product manual for more detailed solutions and specific error indicators.

Specifikace

Záruka a podpora

For detailed warranty information, product registration, or technical support, please visit the official PetSafe webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.

Official PetSafe Webmísto: www.petsafe.net