Zavedení
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Behringer P24 Personal Monitor. Designed for live performances, the P24 allows musicians to create their own custom monitor mix with ease, ensuring optimal sound clarity on stage. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Důležité bezpečnostní pokyny
Always follow these basic safety precautions when using the P24 Personal Monitor:
- Neotevírejte zařízení casing. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
- Nevystavujte jednotku dešti ani vlhkosti, abyste předešli požáru nebo úrazu elektrickým proudem.
- Zajistěte dostatečné větrání. Neblokujte větrací otvory.
- Používejte pouze napájecí adaptér specifikovaný výrobcem.
- Neumísťujte jednotku do blízkosti zdrojů tepla, jako jsou radiátory, topná tělesa, kamna nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
- Chraňte napájecí kabel před šlapáním nebo přiskřípnutím, zejména u zástrček, zásuvek a v místě, kde vychází z přístroje.
- Odpojte zařízení během bouřky s blesky nebo když se delší dobu nepoužívá.
- Veškeré opravy svěřte kvalifikovanému servisnímu personálu.
Nastavení
1. Vybalování
Carefully unpack your P24 Personal Monitor and inspect it for any signs of damage during transit. Retain the packaging materials for future transport or storage.
2. Připojení
The P24 connects to a compatible digital mixing console or StageConnect hub. Ensure all connections are secure before powering on the device.
- StageConnect Input: Připojte StageConnect cable from your digital mixer or hub to the P24's StageConnect input. This connection typically provides both audio and power.
- Sluchátkový výstup: Connect your in-ear monitors or headphones to the designated headphone output jack.
- AUX/MIC Input: If using an external auxiliary source or a local microphone, connect it to the AUX/MIC input.
3. Počáteční zapnutí
Once all connections are made, power on the connected StageConnect system. The P24 will power on automatically and display its current firmware version on the P24M screen.
Návod k obsluze
Figure 1: Behringer P24 Personal Monitor Front Panel. Tento obrázek zobrazuje pohled shora dolů view of the Behringer P24 Personal Monitor. It features three main control sections: "TALKBACK VOLUME" on the left, "CHANNEL SETTINGS" in the center, and "OUTPUT VOLUME" on the right. Below these sections are twelve individual channel faders, numbered 1 through 12, and an additional fader for "AUX MIC". Each fader has a corresponding numbered button above it. The "TALKBACK VOLUME" section includes a "TALK" button and a rotary knob. The "CHANNEL SETTINGS" section features a small display labeled "P24M V0.2.8", a rotary knob, and "ADJUST PROCEED SETTINGS" text. The "OUTPUT VOLUME" section has a vertical LED meter indicating "LIMIT", "-3", "-6", "-9", "-12", "-18", "-30", and "SIG", along with a large rotary knob and the "behringer" logo.
1. Talkback Volume Control
The TALKBACK VOLUME section (left side of the unit) allows you to control the level of your talkback microphone. Press the MLUVIT button to activate the talkback function, and use the rotary knob to adjust the volume. This is useful for communicating with other musicians or the sound engineer.
2. Nastavení kanálu
The NASTAVENÍ KANÁLU section (center of the unit) features a display and a rotary knob for advanced adjustments. The display shows the unit's model and firmware version (e.g., P24M V0.2.8). Use the rotary knob and the "ADJUST PROCEED SETTINGS" functionality to navigate and modify various channel parameters, such as EQ, panning, or effects sends, depending on the capabilities of the connected StageConnect system.
3. Ovládání výstupní hlasitosti
The VÝSTUPNÍ OBJEM section (right side of the unit) controls the overall volume of your personal monitor mix. Use the large rotary knob to adjust the master output level to your headphones. The vertical LED meter provides visual feedback on the output signal level, indicating when the signal is approaching or reaching its limit (clipping).
4. Individual Channel Faders
The P24 features twelve individual channel faders, numbered 1 přes 12, plus an additional AUX MIC fader. Each fader controls the volume of its corresponding input channel in your personal mix. Move the fader up to increase the volume and down to decrease it. The numbered buttons above each fader may provide additional functionality, such as muting or soloing the channel, depending on the system configuration.
5. Monitoring with Headphones
Connect your headphones or in-ear monitors to the headphone output. Adjust the individual channel faders and the master VÝSTUPNÍ OBJEM to create a comfortable and balanced personal mix. Ensure the volume is set to a safe listening level to prevent hearing damage.
Údržba
1. Čištění
To clean the P24, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components. Ensure the unit is powered off and disconnected from all sources before cleaning.
2. Skladování
When not in use for extended periods, store the P24 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage to protect against dust and physical damage.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jednotka není napájena. | StageConnect cable not connected or faulty; power source issue. | Ujistěte se, že StageConnect cable is securely connected. Verify the power source for the StageConnect system is active. Try a different StageConnect cable if available. |
| Ze sluchátek není slyšet žádný zvuk. | Headphones not connected; Output Volume too low; individual channel faders down; no signal from mixer. | Check headphone connection. Increase the VÝSTUPNÍ OBJEM knob. Raise individual channel faders. Verify that the mixer is sending audio to the StageConnect system. |
| Zkreslený zvuk. | Output Volume too high (clipping); input signal too hot from mixer. | Snižte VÝSTUPNÍ OBJEM. Check the LED meter for clipping and adjust accordingly. Inform the sound engineer to reduce the input signal level from the mixer. |
| Talkback microphone not working. | MLUVIT button not pressed; Talkback Volume too low; microphone issue. | Stiskněte tlačítko MLUVIT button. Increase the TALKBACK VOLUME knob. Ensure the microphone is properly connected and functional. |
Specifikace
- Model: P24
- Číslo modelu položky: 0609-AAM86-US1
- Značka: Behringer
- Rozměry produktu: 8"H x 12"Š x 3"V (20.32 cm H x 30.48 cm Š x 7.62 cm V)
- Hmotnost položky: 3.78 liber (1.71 kg)
- Technologie připojení: Auxiliary, StageConnect
- Počet kanálů: 2
- Výrobce: MusicTribe
Informace o záruce
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official Behringer website or contact their customer support. Please retain your proof of purchase for warranty claims.
Zákaznická podpora
For technical assistance, service, or further inquiries about your Behringer P24 Personal Monitor, please visit the official Behringer support page or contact their customer service department. Contact information can typically be found on the manufacturer's webmísto.
