1. Úvod
The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.
2. Klíčové vlastnosti
- Provoz typu „plug & play“: Simple setup with intuitive buttons for quick configuration.
- Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
- Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
- Velký LCD displej: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
- Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.
3. Obsah balení
- DIGITEN THT1032 Controller Unit
- Teplotní sonda
- Vlhkostní sonda
- Uživatelská příručka
4. Konec produktuview
The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.
Obrázek 1: Přední strana view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.
4.1. Ovládací panel a displej
The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).
Obrázek 2: Detailní view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.
- Tlačítko SET: Used to select an outlet for configuration or confirm settings.
- Tlačítko MODE: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
- Tlačítko nahoru (▲): Increases values or navigates menu options.
- Tlačítko dolů (▼): Decreases values or navigates menu options.
- OUT1: Temperature controlled outlet.
- OUT2: Humidity controlled outlet.
- OUT3: Timer controlled outlet.
4.2. Sondy
The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.
Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.
5. Počáteční nastavení
- Připojení sond: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
- Umístění: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
- Zapnutí: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
- Připojit zařízení: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.
6. Návod k obsluze
6.1. Setting Temperature Control (OUT1)
- Stiskněte tlačítko SOUBOR button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
- Použijte Nahoru (▲) or Dolů (▼) tlačítky pro nastavení požadované cílové teploty.
- Stiskněte MODE to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
- Stiskněte SOUBOR to confirm the temperature and mode.
- To set the temperature differential (hysteresis), press and hold SOUBOR for a few seconds when OUT1 is selected. Use Nahoru/dolů to adjust the difference between the set point and when the device turns on/off. Press SOUBOR potvrdit.
6.2. Setting Humidity Control (OUT2)
- Stiskněte tlačítko SOUBOR button repeatedly until OUT2 is selected.
- Použijte Nahoru (▲) or Dolů (▼) buttons to adjust the desired target humidity percentage.
- Stiskněte MODE to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
- Stiskněte SOUBOR to confirm the humidity and mode.
- To set the humidity differential, press and hold SOUBOR for a few seconds when OUT2 is selected. Use Nahoru/dolů pro nastavení. Stiskněte SOUBOR potvrdit.
6.3. Setting Timer Control (OUT3)
- Stiskněte tlačítko SOUBOR button repeatedly until OUT3 is selected.
- Stiskněte MODE to enter the timer programming interface.
- Použití Nahoru (▲) or Dolů (▼) to set the ON time (hour and minute). Press SOUBOR pro přechod na další nastavení.
- Nastavte čas vypnutí (hodinu a minutu) pomocí Nahoru/dolů a SOUBOR.
- The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
- Stiskněte SOUBOR to save and exit the timer settings.
6.4. Přepínání teplotních jednotek (°C/°F)
Pro přepínání mezi stupni Celsia a stupni Fahrenheita stiskněte a podržte tlačítko Nahoru (▲) button for approximately 3 seconds. The display will change accordingly.
7. Údržba
- Čištění: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Péče o sondu: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
- Skladování: When not in use, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný nebo se nezapíná. | Chybí napájení; uvolněné připojení. | Ensure the controller is securely plugged into a live power outlet. Check the power source. |
| OUT1/OUT2/OUT3 not activating connected device. | Incorrect settings; device malfunction; power issue. | Verify temperature/humidity/timer settings. Check if the connected device is working independently. Ensure the controller's set point is met for activation. |
| Humidity probe shows "ERR" reading. | Probe malfunction; damaged cable; sensor error. | Check the humidity probe connection. Inspect the probe cable for damage. If the error persists, the probe may need replacement. |
| Nepřesné údaje o teplotě/vlhkosti. | Probe placement; dirty probe; probe malfunction. | Relocate probes away from direct heat/moisture/airflow. Clean probes gently. If issues persist, consider probe replacement. |
9. Technické specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | THT1032 |
| Požadavek na napájení | 100-240VAC |
| Kapacita zatížení | 10A per outlet (1100W@110V, 2200W@220V) |
| Rozsah regulace teploty | -10 °C až 120 °C / 14 °F až 248 °F |
| Přesnost teploty | ± 0.4 ° C / ± 0.7 ° F |
| Přesnost vlhkosti | ±3 % |
| Typ snímače sondy | Digital Signal Output, I2C Interface |
| Teplota provozního prostředí | 0-50 °C / 32-122 °F |
| Provozní prostředí Relativní vlhkost | <85 % |
| Typ zobrazení | LCD |
| Materiál | Plast |
| Barva | Šedá |
| Hmotnost položky | 1.04 libry |
| Rozměry balení | 6.85 x 6.34 x 1.93 palce |
10. Záruka a zákaznická podpora
DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webstránky pro kontaktní informace.
Uschovejte si prosím doklad o koupi pro případ záručního servisu.
