Důležité bezpečnostní informace
Read all instructions carefully before assembly and use of the Joie Baby Ginger LX 4-in-1 Stroller and Joie Baby Mint Latch Car Seat. Failure to follow these instructions could result in serious injury or death to your child. Keep this instruction manual for future reference.
- Vždy používejte zádržný systém.
- Nikdy nenechávejte své dítě bez dozoru.
- Před použitím se ujistěte, že jsou všechna zajišťovací zařízení zajištěna.
- Nepoužívejte jiné příslušenství nebo náhradní díly, než které schválil výrobce.
- The stroller is suitable for children from birth up to 50 pounds.
- The car seat is suitable for infants within specified weight and height limits (refer to car seat labels).
Obsah balení
Ověřte, zda jsou v balení přítomny všechny komponenty:
- Joie Ginger LX Stroller Frame
- Stroller Seat/Pramette
- Joie Mint Latch Infant Car Seat
- Adaptéry na autosedačky
- Wheels (if not pre-attached)
- Baldachýn
- Návod k použití
Image: The complete Joie Ginger LX Stroller and Mint Latch Car Seat travel system, showing both components.
Nastavení a montáž
1. Montáž kočárku
- Rozložte rám kočárku: Release the folding latch and lift the handle until the frame locks into place. Ensure all locking mechanisms are securely engaged.
- Připevněte kola: Insert the front and rear wheels into their respective slots until they click securely. Pull on the wheels to confirm they are firmly attached.
- Attach the Stroller Seat/Pramette: Align the seat unit with the connectors on the stroller frame. Push down firmly until it clicks into place. Verify it is securely attached by pulling upwards.
- Připevněte vrchlík: Secure the canopy to the designated attachment points on the seat unit.
Image: Diagram illustrating key features of the Joie Ginger LX stroller, including seat height adjustment, expandable canopy, storage basket, and all-wheel suspension.
2. Car Seat Installation (Mint Latch)
The Joie Mint Latch Infant Car Seat features a baseless design for convenient installation using your vehicle's lower anchor attachments or seat belt.
- Using Lower Anchor Attachments:
- Locate the lower anchor points in your vehicle's back seat.
- Extend the built-in lower anchor connectors from the car seat.
- Click the connectors onto your vehicle's anchor points. Ensure a secure connection by pulling on the car seat.
- Adjust the car seat to the correct recline angle using the indicators.
- Using Vehicle Seat Belt:
- Protáhněte pánevní a ramenní pás vozidla skrz určené vodítka pásu na autosedačce.
- Buckle the seat belt and remove all slack. Ensure the car seat is tightly secured and does not move more than one inch side-to-side or front-to-back at the belt path.
- Adjust the car seat to the correct recline angle.
Image: Diagram highlighting features of the Joie Mint Latch car seat, including machine washable fabrics, vehicle belt guides, removable newborn insert, UPF 50+ canopy, built-in lower anchor connectors, and travel system compatibility.
Image: A parent installing the Joie Mint Latch car seat into a vehicle using lower anchor attachments, demonstrating the quick and secure installation process.
3. Travel System Compatibility
To attach the Mint Latch Car Seat to the Ginger LX Stroller:
- Ensure the stroller seat is removed or configured to accept car seat adapters.
- Attach the included car seat adapters to the stroller frame until they click securely.
- Place the Mint Latch Car Seat onto the adapters, ensuring it clicks firmly into place. Verify security by gently lifting the car seat.
Návod k obsluze
1. Stroller Modes (4-in-1 Convertible Design)
The Ginger LX Stroller offers four modes to adapt to your child's growth:
- Pramette Mode: Ideal for newborns, providing a lie-flat sleeping environment.
- Travel System Mode: Combine with the Mint Latch Car Seat for seamless transitions from car to stroller.
- Parent-Facing Seat: Allows your child to face you for interaction.
- World-Facing Seat: Allows your child to observe their surroundings.
Image: Visual representation of the four stroller modes: pramette, travel system, parent-facing seat, and world-facing seat.
2. Pramette Conversion
To convert the seat from pramette to standard stroller mode (and vice versa):
- Locate the adjustment mechanism on the side of the seat unit.
- With one hand, operate the mechanism to adjust the seat backrest and footrest simultaneously to achieve the desired pramette (lie-flat) or upright stroller position.
- Ensure the seat is locked into the chosen position before placing your child in it.
Image: A person demonstrating the one-hand conversion of the Joie Ginger LX stroller seat from pramette to upright stroller mode.
3. Skládání kočárku
To fold the Ginger LX Stroller for storage or transport:
- Ujistěte se, že je sedadlo otočené po směru jízdy a zcela vzpřímené.
- Engage the stroller brake.
- Vyhledejte skládací mechanismus (obvykle na rukojeti nebo na boku rámu).
- Follow the specific instructions for your model to activate the fold. The stroller should collapse into a compact, self-standing package.
Obrázek: Boční view of the Joie Ginger LX stroller in its folded, compact state.
4. Nastavení postroje
The 5-point harness on both the stroller and car seat must be adjusted to fit your child snugly.
- Adjust shoulder straps to be at or just below your child's shoulders when rear-facing (car seat) or at or just above when forward-facing (stroller).
- Tighten the harness until it is snug against your child's body, ensuring you cannot pinch any slack at the collarbone.
- Ensure the crotch buckle is positioned correctly.
Údržba
Čištění
- Tkaniny: The Joie Mint Latch car seat features machine washable fabrics. Refer to the care labels for specific washing instructions. For the stroller fabrics, spot clean with a damp hadříkem a jemným mýdlem.
- Rám: Otřete rám kočárku a plastové části čisticím prostředkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- kola: Regularly clean wheels and axles to remove dirt and debris. Lubricate moving parts with a silicone-based lubricant if necessary.
Skladování
Store the stroller and car seat in a dry, cool place away from direct sunlight to prevent fading and material degradation.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stroller does not fold easily. | Folding mechanism not fully disengaged; seat not in correct position. | Ensure the seat is forward-facing and upright. Refer to the folding instructions and ensure all levers are activated. |
| Car seat latch does not click securely onto stroller adapters. | Adapters not fully engaged; car seat not aligned correctly. | Ensure car seat adapters are firmly attached to the stroller. Realign the car seat and push down firmly until a click is heard. Check for any obstructions. |
| Kola vržou nebo se s nimi obtížně manévruje. | Dirt/debris in wheel mechanism; lack of lubrication. | Důkladně očistěte kola a nápravy. Na pohyblivé části naneste mazivo na bázi silikonu. |
| Harness is difficult to adjust or buckle. | Straps twisted or mechanism obstructed. | Untwist any straps. Ensure no fabric or debris is blocking the buckle mechanism. Refer to harness adjustment instructions. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Joie |
| Barva | Shale Dark |
| Materiál | Polyester (Fabric), Metal (Frame) |
| Age Range (Stroller) | Newborn - Toddler |
| Maximum Weight Recommendation (Stroller) | 50 libry |
| Zahrnuté komponenty | Adaptéry na autosedačky |
| Item Dimensions L x W x H (Stroller) | 24.5 cm D x 17.75 cm Š x 23.25 cm V |
| Folded Size (Stroller) | l 17.5 x w 24.5 x h 32 |
| Typ postroje | 5 Point, Adjustable |
| Typ kočárku | Standard Stroller, Travel System Compatible |
| Kapacita míst | 1 |
| Additional Stroller Features | 5-Point Safety Harness, Lightweight, Stroller Brake System |
| Car Seat Compliance | FAA compliant for airplanes (Mint Latch) |
Záruka a podpora
Informace o záruce
For detailed warranty information regarding your Joie Baby Ginger LX Stroller and Mint Latch Car Seat, please refer to the warranty card included with your product or visit the official Joie Baby webZáruční podmínky se mohou lišit v závislosti na regionu.
Zákaznická podpora
If you have any questions, require assistance with assembly, operation, or troubleshooting, please contact Joie Baby customer service. Contact details can typically be found on the Joie Baby webmístě nebo na obalu produktu.
Můžete také navštívit Joie Store on Amazon pro více informací o produktu a zdroje podpory.
