Zavedení
Thank you for choosing the tectake 2-in-1 Garden Chair and Lounger. This versatile outdoor furniture piece is designed to provide comfort and functionality, serving as both a garden chair and a comfortable rocking chair. Its ergonomic design, adjustable backrest, and durable, weather-resistant materials make it an ideal addition to your patio, balcony, garden, or camping setup. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your product.
Bezpečnostní pokyny
Před sestavením a použitím výrobku si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést ke zranění nebo poškození výrobku.
- Hmotnostní limit: Nepřekračujte maximální nosnost 120 kg (264 liber).
- Stabilní povrch: Židli vždy umístěte na rovný, stabilní a vodorovný povrch, aby se nepřevrhla.
- Shromáždění: Před použitím se ujistěte, že jsou všechny součásti správně smontovány a všechny upevňovací prvky bezpečně utaženy. Pravidelně kontrolujte utažení upevňovacích prvků.
- Děti: Keep children away from the product during assembly. Supervise children when they are near or using the chair.
- Pohyblivé části: Be cautious of pinch points when adjusting the backrest or transforming the chair.
- Povětrnostní podmínky: While weather-resistant, prolonged exposure to extreme weather (heavy rain, strong winds, direct sun) may reduce product lifespan. Consider storing indoors or covering during harsh conditions.
- Ostré předměty: Avoid contact with sharp objects that could damage the fabric.
Obsah balení
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact tectake customer support.
- 1 x tectake 2-in-1 Garden Chair & Lounger
- Assembly Hardware (screws, nuts, washers, etc.)
- Návod k montáži (tato příručka)
Nastavení a montáž
Follow these steps carefully to assemble your tectake 2-in-1 Garden Chair & Lounger. It is recommended to have two people for assembly.
- Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, měkký povrch, abyste zabránili poškrábání.
- Identifikujte díly: Refer to the included parts list (if separate) or diagrams to identify each component (frame sections, fabric seat, armrests, footrest, hardware).
- Sestavení hlavního rámu: Connect the main aluminum frame sections using the provided screws and tools. Do not fully tighten screws until all sections are loosely assembled.
- Připevnění látkového sedáku: Secure the Textilene fabric seat to the frame according to the design. Ensure it is taut and evenly distributed.
- Instalace loketních opěrek: Attach the curved armrests to the designated points on the frame.
- Attach Footrest Mechanism: Secure the footrest and its folding mechanism to the main frame. Ensure it can pivot smoothly.
- Utáhněte všechny upevňovací prvky: Once all components are in place, systematically tighten all screws and bolts. Do not overtighten.
- Kontrola stability: Gently rock and test the chair to ensure it is stable and all parts are securely fastened.
Figure 1: Illustration of the chair's structure and its transformation capability.
Návod k obsluze
Your tectake 2-in-1 Garden Chair & Lounger offers versatile relaxation options.
2-in-1 Function: Lounger to Rocking Chair
The unique design allows you to easily switch between a comfortable lounger and a relaxing rocking chair.
- Režim lehátka: To use as a lounger, extend the footrest fully. The chair will rest on its anti-slip feet, providing a stable reclining position.
- Rocking Chair Mode: To transform into a rocking chair, gently fold the footrest inwards and tuck it underneath the main seat frame. The chair will then rest on its curved base, allowing for a smooth rocking motion. Ensure the footrest is fully secured in its folded position before rocking.
Figure 2: The tectake chair demonstrating its 2-in-1 functionality.
Nastavení opěradla
The backrest can be adjusted to 4 different positions for optimal comfort, whether you are sitting upright, reclining, or lying down.
- To adjust the backrest, slightly lift the backrest while seated or standing beside the chair.
- Locate the adjustment mechanism on the side of the chair (typically a notched bar or lever).
- Move the backrest to your desired angle and ensure it locks securely into one of the four available positions.
- Always ensure the backrest is fully engaged in a notch before applying your full weight.
Figure 3: The adjustable backrest mechanism with four distinct positions.
Údržba
Proper care and maintenance will extend the life of your tectake Garden Chair & Lounger.
- Čištění:
- For the Textilene fabric, wipe with a damp cloth and mild soap solution. Rinse thoroughly with clean water and allow to air dry completely. Do not use harsh chemicals or abrasive cleaners.
- For the aluminum frame, wipe with a soft, damp cloth. Avoid abrasive materials that could scratch the powder coating.
- Inspekce: Periodically inspect all bolts, screws, and connections to ensure they are tight. Retighten as necessary.
- Skladování: During prolonged periods of non-use or in harsh weather conditions (winter, heavy rain), it is recommended to store the chair indoors or cover it with a protective outdoor furniture cover to prevent wear and tear.
- Protiskluzové nožičky: Ensure the plastic anti-slip feet are intact and not worn down to protect your flooring and maintain stability.
Figure 4: Detail of the durable Textilene fabric and floor-friendly anti-slip feet.
Odstraňování problémů
If you encounter any issues with your tectake Garden Chair & Lounger, refer to the following common problems and solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Židle se zdá nestabilní nebo se kymácí. | Uvolněné spojovací prvky; nerovný povrch. | Ensure all assembly bolts and screws are securely tightened. Move the chair to a flat, level surface. |
| Opěradlo se nezajistí v dané poloze. | Mechanismus je zablokovaný nebo není zcela zajištěn. | Check for any obstructions in the adjustment mechanism. Ensure the backrest is lifted slightly before attempting to adjust and that it clicks firmly into place. |
| Footrest does not fold smoothly. | Mechanism dirty or misaligned. | Clean the pivot points of the footrest mechanism. Check for any bent parts or obstructions. Apply a silicone-based lubricant if necessary (avoid oil-based lubricants). |
| Látka se jeví jako skvrnitá nebo špinavá. | Nahromaděné nečistoty nebo rozlité tekutiny. | Clean the Textilene fabric as per the "Maintenance" section using mild soap and water. |
Specifikace
Technical details for the tectake 2-in-1 Garden Chair & Lounger.
| Funkce | Detail |
|---|---|
| Číslo modelu | 405816 |
| Barva | Anthracite (Antrazit) |
| Materiál | Powder-coated Aluminum frame, Textilene fabric, Steel, Polyvinyl chloride |
| Lounger Dimensions (L x W x H) | 195 x 62 x 53 - 91 cm (76.8 x 24.4 x 20.9 - 35.8 inches) |
| Rocking Chair Dimensions (L x W x H) | 62 x 95 x 91 cm (24.4 x 37.4 x 35.8 palce) |
| Seat Dimensions (W x H) | 52 x 43.5 cm (20.5 x 17.1 palců) |
| Výška opěradla | 77.5 cm (30.5 palců) |
| Doporučená maximální hmotnost | 120 kg (264 lb) |
| Speciální funkce | Ergonomic, 2-in-1 Function, Adjustable Backrest (4 positions) |
Figure 5: Detailed dimensions of the tectake 2-in-1 Garden Chair & Lounger.
Záruka a podpora
tectake stands behind the quality of its products. For any questions, concerns, or warranty claims, please contact tectake customer support.
Než budete kontaktovat podporu, mějte prosím připravené číslo modelu (405816) a informace o nákupu.
For the most up-to-date contact information, please visit the official tectake webwebu nebo se podívejte na dokumentaci k nákupu.
